290 Results: New & Used in Other Parts & Accessories in Beverley 5009, SA

holden hj kingswood wagon, needs some work, motor runs, colum auto, south australian plates, bucket seats with center console, tow bar, rust isnt too bad, good floors and needs new exhaust

THIS IS FOR 1 FALCON XT HEADLIGHT SURROUND. SUITS LEFT HAND (PASSENGER) SIDE. REASONABLE OVERALL CONDITION. IT HAS A FEW SMALL DINGS ON THE OUTER EDGE AREA (CIRCLED) AND SOME MINOR SCRATCHES HERE AND THERE. THERE IS SOME PAINT OVER-SPRAY THAT WILL NEED CLEANING OFF. (note: we do not have any for the right hand side). for more details, phone the number supplied during business hours.

**************** LOCAL PICK-UP ONLY **************** this is for a FALCON XR ⁄ XT front valance panel. it is in very good straight condition. just needs some very minor repair on the lip as shown and a good overall clean up. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

THIS IS FOR 2 FALCON XR-XY WIRING LOOM COVERS (FIT UNDER THE SCUFF PLATES). BOTH ARE TO SUIT THE REAR AND BOTH SUIT EITHER SIDE. NO RUST HOLES AND BOTH JUST NEED A GOOD CLEAN UP. (I DO NOT HAVE ANY USED ORIGINAL COVERS TO SUIT THE FRONT). for more details, phone the number supplied during business hours.

this is for a FALCON XK-XP DOOR WINDOW REGULATOR. suits left hand (passenger side) front. fits all models except coupe. it is in good checked working condition just needing a good clean up. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XR-XY SILL PANEL. suits right hand (drivers) side. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XR-XY SILL PANEL. suits left hand (passenger) side. for more details, phone the number supplied during business hours.

this is for a new FALCON XR-XY TORQUE BOX. suits left hand (passenger) side. also suits ZA-ZD FAIRLANE. for more more details, phone the number supplied during business hours.

this is for a FORD 1961-70 F100 3 SPOKE STEERING WHEEL. this is a reproduction wheel that has been painted a burgundy colour at some stage (originally it would have been a black wheel as that is the only colour available for the reproduction steering wheels). no cracks. still in excellent condition. would more than likely need to be painted the colour you require of course. for more details, phone the number supplied during business hours

this is for a FALCON XK/XL STEERING WHEEL. this is a reproduction wheel that has been painted a burgundy colour at some stage (originally it would have been a black wheel as that is the only colour available for the reproduction steering wheels). no cracks. still in excellent condition. would more than likely need to be painted the colour you require of course. for more details, phone the number supplied during business hours

this is for 1 FALCON XK (early) DRUM BRAKE STUB AXLE. suits left hand (passenger) side. just needs a very good clean up. this stub axle only suits very early XK (1960/61) models that still has the original upper control arm with the 3 stud ball joint and the early models had a smaller hole on the stub axle for the lower ball joint. for more details, phone the number supplied during business hours.

this is for 1 new pair of 289/302/351 WINDSOR "POWER BY FORD" ROCKER COVERS. DARK BLUE. no other items included. only what is shown in the photos. for more details, phone the number supplied during business hours.

this is for a pair of FALCON XK/XL DRUM BRAKE STUB AXLES. 1 RH AND 1 LH. both just need a very good clean up. these stub axles only suit models that still have the original upper control arms with the 3 stud ball joints. they will not suit XM/XP models. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XM/XP REAR QUARTER PANEL SECTION. SUITS SEDAN AND WAGON. it would be classified as a half quarter panel. suits left hand (passenger) side. for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XL-XP 1/4 VENT WINDOW ASSEMBLY. SUITS THE RIGHT HAND (DRIVERS SIDE) FRONT DOOR. THE GLASS HAS SOME MINOR SCRATCHES. THE ASSEMBLY OPENS/CLOSES/LOCKS AS IT SHOULD. THE SEAL IS AGED OF COURSE. THE HANDLE IS SHINY BUT WITH SOME MINOR PITTING. NOTE: this assembly is correct for the XL/XM and early XP models in that it has the "knuckle" style pivot as shown. will still fit all XK-XP body styles though except XM/XP coupe. for more details, phone the number supplied during busine

this is for a FALCON XR/XT steering box. it is the 20:1 ratio style. while turning the steering shaft throughout its full rotation, it does feel a little tight and a little "gritty". it might be more suitable to suit recondition. it has a manual steering pitman arm fitted to it. (i do not have any 16:1 ratio steering boxes or power steering pitman arms). for more details, phone the number supplied during business hours.

************* LOCAL PICK-UP ONLY ******************** this is for a FALCON XP 3 SPEED BORG WARNER 35 AUTOMATIC TRANSMISSION TORQUE CONVERTOR. condition unknown and sold as is. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

this is for a FALCON XP front valance panel. straight overall condition with no accident damage and no rust. only some minor surface rust and possibly a few very small repairs needed. also has 4 holes drilled into it probably from old spotlights. should not need too much work to bring it up nice. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1967/68 BONNET MOULDING. includes mounting hardware. NOTE: it would be classified as in seconds condition as there are some imperfections along the profile shape. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1970 BONNET MOULDING. includes mounting hardware. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1969 BONNET MOULDING. includes mounting hardware. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1964-66 BONNET MOULDING. includes mounting hardware. for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XM DELUXE SIDE BODY CHROME MOULDING SET. SUITS SEDAN AND WAGON. 8 PIECES IN TOTAL. 2 FRONT GUARD MOULDINGS, 2 FRONT DOOR MOULDINGS, 2 REAR DOOR MOULDINGS AND 2 REAR 1/4 MOULDINGS. MOST HAVE NO DINGS. A COUPLE HAVE NOTHING MORE THAN A SMALL DING OR TWO. WOULD SUIT A DAILY DRIVER VERY NICELY. ALL WILL NEED A GOOD POLISH. (NO MOUNTING HARDWARE INCLUDED). for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XP DELUXE SIDE BODY CHROME MOULDING SET. SUITS SEDAN AND WAGON. 8 PIECES IN TOTAL. 2 FRONT GUARD MOULDINGS, 2 FRONT DOOR MOULDINGS, 2 REAR DOOR MOULDINGS AND 2 REAR 1/4 MOULDINGS. MOST HAVE NO DINGS. A COUPLE HAVE NOTHING MORE THAN A SMALL DING OR TWO. WOULD SUIT A DAILY DRIVER VERY NICELY. ALL WILL NEED A GOOD POLISH. (NO MOUNTING HARDWARE INCLUDED). for more details, phone the number supplied during business hours.