12 Results: New & Used in Trucks in Brisbane City 4000, QLD

• 400000 km
• 6x4

2021 Hyundai Hx55 Excavator(1500hrs), 2010 CAT skid steer(1700hrs) & 2007 Isuzu Beavertail Truck(8.1m tray,genuine 400,000kms) for Sale. All vehicles reliable, well maintained and serviced. Enclosed cabin with air con, Tier1 Spec, comes with Rops Fops Ripper, Auger drive and Augers, Hydraulic Rock Grab, Rock Breaker, hydraulic tilt hitch, 2×300, 1×450 & 1×600, 1×750 buckets, 2×1.2m mud buckets, 1×1.2 tilt bucket, , Sieve bucket, drills, extension bar, 1×4in1 skid steer bucket, 1× skid steer loa

Mercedes A6864230012 Brake Disc, Vented. Price is for set of two. Truck brakes. Listed as pickup, courier can be organised for a fee. Each box/part weights 27.7kg. 40cm x 40cm x 16cm each.

75LPM 12V air/tyre compressor. Used only a handful of times for tyres on Prado. Still in great condition. See photos for compressor specifications.

250mm Truck Amber Light magnetic base long power lead

A handy compact unit from the team behind Rhino vehicle alarms the VSPOWCONVERTER2 is designed to provide a clean steady source of 12V power (at up to 10 amps) from a DC source ranging from 18V through to 32V. Perfect for running 12V devices in a 24V truck or bus without creating an uneven load on the vehicle batteries, or running 12V devices from an installation that only has 18V, 24V, or 32V infrastructure. The unit is compact, and highly efficient (94%). Instructions are included with

These 7 inch / 178mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They have a 55W low beam filament, and a 75W high beam filament. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "2 pin" version designed for high beam operation, rated at 55 watts. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "3 pin" low beam / high beam units. Most rigs use 2 hi/lo units and 2 hi only unit

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "3 pin" version designed for high and low beam operation, with 50 watts low beam, and 65 watts high beam. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "2 pin" high beam only units. Most rigs use 2 hi/lo un

These 5.75 inch / 146mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They are the two pin 55W high beam unit. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.

NEW & USED ISUZU D-MAX PARTS. # FRONT BUMPER BARS 2012 TO 2021 # REAR BUMPER BARS # SIDE STEPS # SPORTS BARS # NUDGE BARS # TAIL LIGHTS # TAIL GATES # TUB TRAYS # TUB LINERS WE ALSO STOCK MUX # FRONT BUMPER BARS # SIDE STEPS ANYTHING ELSE HAS ALREADY SOLD.