22 Results: New & Used in Hand Tools in Brunswick East 3057, VIC

These 4 metal rulers all have a bit of age on them and are in very good condition. There are 3 x 30 cm rules and 1 x 6 cm rule, all of which are double sided. The 'longer' of the 30 cm rulers is a flexible 'Biltema' - Stainless Hardened' ruler another is a 'Micador' that was produced in Japan whilst the other loner one is unlabeled and a far more rigid workman's style ruler with thicker metal. The little 6 inch one was made in China and has 'stainless' on it. Inspection available as is local pi

These are 3, vintage inside spring calipers produced in the first half of last century and all of which are in good working order. The largest caliper has a total length of 7 inches (17.5 cm) opens to a full width of 6.5 inches (16.5 cm) and was produced in the USA by 'SAMSON TOOL Mfg' of Newark, New Jersey which is stamped on the tool. The other 2 smaller calipers are by the iconic English tool maker 'Moore & Wright' of Sheffield, England which is also stamped on the tools. They have respectiv

This is a large, vintage, outside diameter, spring caliper produced in the first half of last century by the iconic English toolmaker 'MOORE & WRIGHT' of Sheffield, England which is stamped on the tool - See pictures. This caliper which is used to measure the external size of an object is in lovely vintage condition and full working order. It's total length is 9 inches (23 cm) the length from the spring nut to the bottom of the tool is 6 inches (15 cm) and it opens to a maximum width of 8 inche

These are 2 x VINTAGE, bow cut swords that would make great decor pieces hanging up though they are both certainly still usable. The blades are rusty and would need to be either replaced or sharpened but the frames are both rock solid and the handle clips open and close again tightly. The larger orange saw has a length of 82 cm and a width of 24 cm whilst the shorter black saw with the red clip has a length of 62 cm and a width of 21 cm. Inspection available as is local pick up. Postage if requ

A pair of of vintage 'GILBOW' Tool Company Ltd 14" (350mm) tin snipes that were produced in England and are model: G245. They weigh 900 grams, and have 85mm blades that still cut but have rust on them - See pictures. Inspection available as is local pick up. Postage if required is $14.00. (PayPal, Bank deposit or Pay on pick up available).

This is a Lot Of 4 Vintage Ball Pein hammers with the older 3 being particularly vintage pieces and the 3rd, lighter handled hammer a little more recent - See pictures. The handles on the 2 thinner, older hammers are fairly worn with some rust on the heads and would be mainly collector pieces whilst the thickest handle older hammer and the newer one are still very sound and would be fine to use. Their length measurements are: 30 cm, 27.5 cm, 25 cm and 24 cm respectively and they weigh a combine

This is a NEW, SEALED & UNOPENED, WorkZone, 7 piece flat bit set that comes with a tough plastic storage case. The set contains bit sizes from 10mm to 32mm with each one titanium coated and made from high quality carbon steel. Inspection available as is local pick up. Postage if required is $10.00. (PayPal, Bank deposit or Pay on pick up available).

This is a 'BETTS' Professional 1200mm, shockproof, spirit level measuring tool. The tool is in full working order and good cosmetic condition with just one of the end rubbers missing - See pictures. Inspection available as is local pick up. (PayPal, Bank deposit or Pay on pick up available).

BENCH GRINDER, HAND DRIVEN, 4" WHEEL Hand Screw Attachment to Bench Post $15

Selling x4 Assorted Chisels. Pickup from Brunswick East

Selling x6 Assorted USED Hacksaws. $100 the lot Pickup from Brunswick East

Selling a USED Milwaukee MLBX78 2000mm (78") RedStick Box Spirit Level. Features: - ALL-METAL BACKBONE Strongest, most durable frame. Reinforced vial retention - SHARPSITE Vial Technology provides best readability and impact protected - Guaranteed Lifetime Accuracy, accurate to .029° ( .0005"/in, 0,5mm/M) - High Contrast Vial System is easy to clean and optimizes visibility - High Density, Removable End-Caps protect frame and provide access in tight spaces - Wide, durable handles for c

Brand New KINCROME 8pc TORX Bit Set 1/4 Square Drive. FEATURES: • This Kincrome TORX® Bit Set is ideal for any application where a TORX® head fastener requires attention, designed for everyday use in mind. • This set is complete with a steel tin and 1/4" Drive Coupler. • Bits manufactured from S2 Steel • Hardened and tempered for extended life • Polished for corrosion protection • Chrome Vanadium Steel ¼” drive coupler • Convenient metal storage tin • Sizes: T10, T15, T20, T25, T27,

Brand New Wera 9 Piece Imperial Hex Key Set. No toolbox is complete without a set of high quality hex keys! This L-key set features a ball-end on the long arm enabling angled screw driving jobs. Featuring a Hex-Plus profile to prevent damage to screw heads, these keys are durable and reliable. Features: Wear-free clip material for increased durability L-key set for imperial hexagon socket screws Hex-Plus profile to prevent damaged screw heads Abrasion-resistant size marking for

Selling a USED set of 5x Ring Spanner Set with Ratchet. Sizes: 6, 8, 10, 12, 13, 14, 15, 17, 19 & 22

Brand New 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs. Features: - Thin profile, sealed, teardrop head design offers improved access and durability for highly effective application - Torque accuracy of /- 3% CW between 20% and 100% of wrench capability - Meets or exceeds ISO 6789 and ASME B107.300-2010 standards and specifications - Pull adjustment collar feature allows you to make quick and easy torque setting changes - Scale markings are highly visible and easy to read - Knu

Up for sale is a Brand New & Sealed KINCROME 1/2" Drive Torque Wrench Deflecting Beam. Features: • Deflecting Beam Mechanism - No Spring • Dual Signal - Audible Click and Visual • Range - 20-220 Ft/Lb (40-300Nm, 4-30 Kgm) • Accuracy of /-2% of Setting • Sliding Scale • Protective Blow Mould Case

Selling a USED Heavy Duty 24" (600mm) Plumbing Pipe Wrench. Features: - Heavy strength body - Forged heat treated jaws - Easy turn roll nut

Selling a USED SIT SpidWire Hand Brush - Steel in Red. Made in Italy Features: - Plastic handle impervious to most oils, thinners and brake fluid Applications: - Suitable for general purpose use in light deburring, cleaning and derusting

Selling a USED Stanley 34-138 FatMax 30m Steel Long Tape Measure. Features: - 3:1 Gear Drive For Fast Rewind - 10mm Wide Steel Blade For Durability - Polymer-Coated Blade Withstands Abrasion - High-Impact ABS Case With Durable Rubber-Holds Up To Heavy Use - Steel Roller Cage Protects Case During Retraction For Long Life - Cushion Grip Provides Comfortable, Slip-Resistant Hold - Corrosion-Resistant Tru-Zero Folding End Hook For Accurate Measurements Specifications: - Length: 30m -

Brand New MechPro 25 Piece Socket (METRIC/SAE) 3/8" Drive Set. INCLUDES: - METRIC SOCKETS 12pcs: (9-22mm) - AF SOCKETS 7pcs: (3/8"-3/4") - 3/8" Dr Ratchet W/ Quick Release - 3/8" Extension Bar 75mm - 3/8" Extension Bar 150mm - 3/8" Dr 16mm (5/8") Spark Plug Socket - 3/8" Dr 21mm (13/16") Spark Plug Socket - 3/8 "Dr Universal Joint - Metal Box

Brand New & Sealed Kincrome 150mm(6") Digital Vernier Caliper. Description: - Large easy to read LCD Screen - Manufactured from Hardened Stainless Steel - Four Way Measurement; Internal, External, Depth, Step - Auto Off feature 5 Minutes - Zero Setting at any position - Battery 1 x CR2032 3V - Accuracy: /-0.01mm ( 100-200mm), /-0.04 (>200-300mm) - Resolution; Metric (0.01mm), Inch (0.0005"), Fraction (1/128) Specifications: - Length: 150mm (6") - Range: 0 - 150mm (0 - 6") - Battery: CR20