1 Results: New & Used in Trucks in Hemmant 4174, QLD

Truck Air-conditioning Unit - Viesa Truck Air-conditioning, - Suit truck, tractor, header etc, - Good Original Order, - As New! - Ready to Install. PLEASE EMAIL: OR CALL: .

• 595000 km

Isuzu fvy crane truck 2007 Certified crane 24ton gvm Palfinger Pk 15500 crane 8.2 mtr tray 595 ks Manual transmission Just gone through pit inspection 5/4/2004 $99500 negotiable Bogie drive /difflock Truck ready for work Brisbane .Qld

• 295 hp
• 266245 km
• 6x4

2009 Crane truck in good condition , Allison 6 speed automatic transmission,Boggie Drive ,9 meter long tray with 5mm checker plate ,UHF radio ,Reverse camera ,diff lock ,Palfinger Crane 9501B , 9.8 meter approach ,10 years till 2028 , Great condition

IN GOOD CONDITION. 460cm H.

Heavy duty 5 TONNE rachet straps . Consists of 2 units ( 2 strap lengths and 2 rachets ) . Made by Ancra Australia . Pickup from Morningside 4170 or I may be able to assist with delivery . For details - Jeff Simpson $50 for both .

A handy compact unit from the team behind Rhino vehicle alarms the VSPOWCONVERTER2 is designed to provide a clean steady source of 12V power (at up to 10 amps) from a DC source ranging from 18V through to 32V. Perfect for running 12V devices in a 24V truck or bus without creating an uneven load on the vehicle batteries, or running 12V devices from an installation that only has 18V, 24V, or 32V infrastructure. The unit is compact, and highly efficient (94%). Instructions are included with

These 7 inch / 178mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They have a 55W low beam filament, and a 75W high beam filament. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "2 pin" version designed for high beam operation, rated at 55 watts. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "3 pin" low beam / high beam units. Most rigs use 2 hi/lo units and 2 hi only unit

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "3 pin" version designed for high and low beam operation, with 50 watts low beam, and 65 watts high beam. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "2 pin" high beam only units. Most rigs use 2 hi/lo un

These 5.75 inch / 146mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They are the two pin 55W high beam unit. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.