In

FORD FALCON XY XW XT XR HUGE BOSS Bulge & Scoop Fibreglass Bonnet

$525.00
-37.8799664" 147.9625597"
Kalimna VIC 3909
Watch
Nev
Gummie since 2012
On Gumtree   three days ago
******8974 
Date Listed:
24/09/2013
Last Edited:
25/09/2013
Make:
Ford
Model:
Falcon
Body Type:
Sedan
Condition:
New
Greetings from GPRS as we know all too well ourselves that any classic parts are getting harder & expensive to find let alone good straight & Rust Free bonnets (unless you want a new steel unit at $800+ who the hell would cut up a new bonnet to fit a scoop etc?!!) & with these you’ll never have that worry again for your XR-XY ute / Pano's / wagons / sedans!

These made in house bonnets XR-XY Obviously these are MODIFIED VERSION'S If you don't like attention or have a bog stock 302 in your ride than maybe you mightn't like this bonnet..

However if you need AIR & SPACE & want something that stands out like Dogs Nuts then THIS bonnet is for you!!

This is a XR8 BOSS BULGE ON STEROIDS with a scoop!! (A Version minus the scoop ie just the bulge is also available for the same price.

WE ALSO HAVE A REVERSE COWL BONNET Check out my other items! These are full skinned & reinforced as per original inc steel hinge & latch sections Fibreglass bonnets!

WE ALSO LEAVE THE BONNETS UNDERSIDE REINFORCEMENT BRACING INTACT AS PER ORIGINAL SO YOU CAN DETERMINE WHAT SIZE / CONFIGURATION YOU WANT EG: YOU MAY WANT TO JUST CLEAR AN SMALL AIR CLEANER & LEAVE THE REINFORCEMENT TO GIVE YOU A HOT AIR BARRIER WE DON'T KNOW SO WE LEAVE THE TRIMMING TO YOU!!

They’re tough enough to use with the original sprung factory hinges (ensure they are not stiff & move freely like they should do though!) are fully hand laid fibreglass & have steel plates as per the originals for adjustment & striker pin.

These take a week to fully cure the top skin alone to ensure it doesn't twist or sag & then is bonded to the reinforced under bonnet bracing as per the originals!

Due to the time & the shier size & amount of materials required they ARE MADE ON A PER ORDER BASIS ONLY!

They will be paid for up front inc freight before they leave, orders will be made & shipped to you within 2-3 weeks of payment & email re shipping details inc tracking info & ETA will be sent when it’s out the door..

Regarding weight these take plenty of glass & resin As such with under bracing left intact they weigh 16kg (original 18.5kg) but these are rust free forever!!


The best & cheapest possible freight will be obtained for this item & added to the purchase price if you want to know what freight cost will be please email me your post code & suburb & I'll get back to you asap.

These are made as per Sale basis due to their size & likeliness of damage in storage (No one wants a crap looking product) as such once payment has been confirmed it’ll be made & shipped within 10-14 business days.


****PLEASE NOTE****

THERE IS A $65 CRATING FEE ON THIS ITEM PLUS WHATEVER FREIGHT COSTS (FREIGHT CALCULATOR IN LISTING HAS BEEN SET FOR CRATED ITEM) THIS IS BECAUSE WE NOW ONLY SEND THEM BOXED IN A PINE CRATE TO ENSURE THAT THEY GET TO YOU IN THE SAME CONDITION THEY LEFT HERE IE UNDAMAGED!

THIS IS ONLY BECAUSE OF COURIERS DAMAGING ITEMS & THEN PLAYING THE "IT MUST'VE BEEN INSUFFICIENCY PACKAGED" = NO INSURANCE.
Report

Report this Ad

Please select a reason for reporting this ad

Thanks for the reportWe'll review this ad.

Nev
Gummie since 2012
On Gumtree   three days ago
******8974  show number
Message to: Nev
Always meet in person to inspect the item and exchange money. Never send or wire money to someone you don't know. Find more helpful hints here.

To deter and identify potential fraud, spam or suspicious behaviour, we anonymise your email address and reserve the right to monitor conversations. By clicking Send you agree to our Terms of Use and Privacy Policy.

Success Your message has been sent to the poster

Don't stop now, keep contacting other ads. Contacting several ads considerably improves your odds of finding a deal.

Only trade with sellers who you can meet in person and never send or wire money. Find more helpful hints here.
 visit

More from this seller

See all ads for this seller
  • image

    $275.00

    Seriously powerful four stroke 3.5 hp genuine briggs & stratton powered Masport made not some cheap Chinese POS this cost me over $450 less than five years ago I moved up here full time soon after and being a rural block with gravel drive it kinda became redundant tried to use it around the curved p... show more

    $275.00

    East Gippsland,

    Lakes Entrance
    27/10/2014
    Add to Gumtree Classifieds watchlist
  • image

    Free

    Surface rust but worked last used 7-8 years ago we have a fixed in built now and haven't used this one since but perfect for someone who needs a bbq that heated nicely and pretty evenly has removable drip tray and electric ignition. Would love to see it go to someone who needs it rather than it rust... show more

    Free

    East Gippsland,

    Lakes Entrance
    28/09/2014
    Add to Gumtree Classifieds watchlist

You may also be interested in...

  • image

    $80.00

    Made from quality fibreglass. Comes in black gelcoat finish ready for moulding then paint into whatever bonnet you want.. BA Xr8 Bonnet Bulge Fibreglass dimensions: 86x77x4.comes in black gelcoat. needs light sanding before painting. australia wide freight available.

    $80.00

    Wellington Area,

    Yarram
    09/06/2014
    Add to Gumtree Classifieds watchlist
  • image

    $95.00

    FORD BA BF BONNET BULGE WILL MOST CARS Made of fibreglass, black gel coat (colour) We have purchased these moulds from another manufacture (JUICY CUSTOMS)http://www.juicycustoms.com.au, so we are listing these items at cost. Please contact us prior to payment so we can get a freight... show more

    $95.00

    Cardinia Area,

    Pakenham
    06/05/2014
    Add to Gumtree Classifieds watchlist
  • image

    $200.00

    This is a full fibre glass bonnet to suit AU1 falcons and all XR models. It has the v8 bulge from ba/f falcons with custom scoops in the side. It is brand new, sitting in my garage for a few years now so I need it gone. It requires moulding to your existing hood. I have included a photo of the fin... show more

    $200.00

    Casey Area,

    Cranbourne North
    08/10/2014
    Add to Gumtree Classifieds watchlist
  • image

    $120.00

    Ford gt bonnet universal scoop fibreglass to mould into the orig bonnet.. Comes in black gelcoat. will require sanding before paint. email for a freight quote with your postcode.

    $120.00

    Wellington Area,

    Yarram
    09/06/2014
    Add to Gumtree Classifieds watchlist
  • image

    $30.00

    CALL ONLY !!!!! CALL ONLY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL ONLY !!!!!!!!!!!!!!!! IF YOUR GENUINE GIVE US A CALL THAN nice canle genuine xr xt xw xy v8 clevelands parts panels and more some coupe parts windsors cuts 1/4 panels front guards chrome trim 351 9 inch diff's door glass bon... show more

    $30.00

    Macedon Ranges,

    Romsey
    11/05/2014
    Add to Gumtree Classifieds watchlist
  • image

    $1,500.00
    Negotiable

    XW-XY Ford Falcon Left hand front guard Brand new part with Ford part sticker still attached Never been on car

    $1,500.00
    Negotiable

    Banyule Area,

    Heidelberg
    23/10/2014
    Add to Gumtree Classifieds watchlist
  • image

    $10.00

    Handle has a nice tight rubber and has good spline in rear that engages onto window regulator. Think this is a genuine ... see last photos showing part no's ALSO have an XB ( XC same?) rear complete light and two outer door handles... see my other adds INSPECTION in Horsham if you are local PO... show more

    $10.00

    Horsham Area,

    Horsham 3400
    12/10/2014
    Add to Gumtree Classifieds watchlist
  • image

    Negotiable

    i buy and sell xr xt xw xy xa xb xc seats or trade im auto trimmer and have lots parts to fix ford seats can retrimme your seats give me calls for qoute 0 all classic car interiors are welcomed no seats are retrimmed at the moment put deposit to start and hold a set seats for your pr... show more

    Negotiable

    Melton Area,

    Melton
    08/05/2014
    Add to Gumtree Classifieds watchlist
  • image

    $1,000.00

    Ford Falcon 1967 XR bumpers front and rear, tail lights front lights gril, handels chrome mouldings brake lighs and exterior door handels.

    $1,000.00

    Glen Eira Area,

    Carnegie
    12/10/2014
    Add to Gumtree Classifieds watchlist
  • image

    $35.00

    HERE IS A TOP LOADER TO GEAR BOX MOUNT SPACER FOR XR TO XY . THESE CAME OUT STANDARD IN MOST OF THESE CARS . MY GT HAS ONE . ITS ABOUT HALF AN INCH THICK . PICK UP IN MT WAVERLEY OR I CAN POST . BEST TIME TO CATCH ME IS AFTER LUNCH ANY DAY INCLUDING WEEKENDS . TO CONTACT ME THE NUMBER IS (03) 954383... show more

    $35.00

    Monash Area,

    Mount Waverley
    20/10/2014
    Add to Gumtree Classifieds watchlist

Please enter the verification code.

Incorrect please try again
Enter the words above: Enter the numbers you hear: