Portable table saw job site saw. Ryobi 240 volt
- Ryobi
Ryobi 240 volt Folding table saw in good condition. Hobby use only and not a lot of work.
Portable table saw job site saw. Ryobi 240 volt
Ryobi 240 volt Folding table saw in good condition. Hobby use only and not a lot of work.
14/04/2024
12” 305mm Compound sliding mitre drop saw. Ryobi 240 volt
240 volt Ryobi compound sliding mitre drop saw I good condition. Only used as a hobby saw and not a lot of use.
14/04/2024
Powermatic PWBS-14 Bandsaw with riser block 14” Bandsaw 240 volt.
Powermatic 14” Bandsaw with riser block extension in good condition. 240 volt. Comes with assorted blades (some new) and mobile base.
14/04/2024
Ozito Buffer Polisher
Bupper/polisher, only used a couple of times, has all the pads in the box. Good for boats and cars.
01/04/2024
DeWalt FlexVolt XR Li-ion 4 Port Simulataneous Fast Battery Charger
Dewalt 18V to 54V FlexVolt battery charger in very good used condition amd working order. The DCB104-XE is a four-port fast charger that charges up to 4 18V & 54V FlexVolt batteries at the same time. It is designed to fit the Dewalt Tool Connect Tag and is ToughSystem compatible. Features: Simultaneous fast charging station with 4 x 8A output per port Compatible with ToughSystem Rails by using the mounting brackets Integrated cord wrap for portability Eyelets for wall mounting Mounting locati
07/03/2024
Makita 40V XGT brushless AWS rotary hammer drill skin
This Makita 40v AVT Rotary Hammer drill presents in good used condition with scuffs and marks but mechanically fine. Specifications Max. drilling capacities in masonry: TCT Bit: 28mm Core Bit: 54mm Diamond Core Bit: 65mm Chuck Type: Quick Change Chuck Impact energy: 2.9j Impact rate: 0-5,000ipm Sound Pressure: 93dB(A) Vibration: 7.5m/s² *Battery and charger not included Inspections welcome 147055
24/02/2024
Makita 40V Max Li-ion XGT Cordless Brushless Reciprocating Saw Skin
Makita JR001GZ 40V Max Li-ion XGT Cordless Brushless Reciprocating Saw in very good lightly used condition. It is the skin only (no battery and charger). The 40V brushless saw delivers cutting speeds up to 35% faster than the 18V equivalent. The 32mm stroke improves cutting efficiency and has a massive cutting capacity with a 255mm maximum capacity in wood and ø130mm in pipe. The JR001G has also been designed to be highly durable. The battery suppression system protects the battery from damage
22/02/2024
MAKITA BISCUIT CUTTER
Makita biscuit cutter. excellent condition $200
22/02/2024
BOSCH POWER TOOL
Bosch DRILL plus 2 x 18v batteries and charger
19/02/2024
Jigsaw Skil 4570 Cordless 18V Variable Speed Brand New
Jigsaw Skil 4570 Cordless 18V Variable Speed Brand New (No battery or charger).
01/02/2024
HiKOKI 18V Cordless Brushless 65mm DA Finish Nailer Skin, VGC
HiKOKI 18V cordless brushless 65mm finish nailer in very good lightly used condition, model NT1865DBAL. It surpasses gas nailers with a unique GASLESS air drive system, driving approximately 2,250 nails per charge. With a lower running cost, you'll enjoy cost-effective performance. The dry-fire lockout ensures protection for your workpiece. Elevate your finishing projects with this exceptional nailer. Features: - Steady nailing performance - achieve consistent nailing performance, even in cold
18/01/2024
HiKOKI 18V Brushless Framing Nailer Skin, VGC
HiKOKI 18V MultiVolt brushless cordless framing nailer, model NR1890DBCL H4Z. Featuring a brushless motor, dual function trigger for change between bump fire and single fire, tool-less depth of fire change, an integrated belt hook, a dry-fire lockout mechanism to protect the tool plus a shock absorption system to extend user comfort. This is a skin only, battery & charger sold separately. Includes: - Hook - Nose Cap - Safety Glasses Features: - Brushless Motor - Shoots 50-90mm Nails - Drives 2
18/01/2024
Makita DJN161Z 18V Li-Ion Cordless 1.6mm Nibbler - Skin Only - VGC
Makita DJN161Z 18V Li-Ion cordless 1.6mm nibbler skin in excellent condition and working order. It was briefly used once for a small job and is now no longer required. Features: - High cutting capacity - Easy to operate slide type on/off switch with lock on function - Easy to grip motor housing: - Small circumference for easy handling - Rubberised soft grip for more comfort and better control - Anti-restart function for safety (with warning lamp) - Battery capacity warning lamp - When remaini
08/01/2024
Makita 18V Cordless Cut Out Tool Skin, Brand New
Brand new Makita 18V Cut-Out Tool Skin, model DCO180Z. The lightweight 18V Makita Rotary Cut-Out Tool offers a convenient, mobile solution to cutting out holes of any shape into plasterboard, tiles, fibre cement or a variety of other materials. Features include high rotational speed for fast cutting & an anti-restart function that prevents accidental start-up. This is the skin only - battery & charger sold separately. Features: - Quick depth adjustment without the need of a tool - High work cap
08/01/2024
Makita cordless drill
Makita variable 2 speed 18v model 6391D keyless chuck excellent condition hardly used.(skin only)
15/10/2023
Makita 6012D cordless drill with charger
The iconic Makita cordless drill, the original cordless drill in working condition. Complete with working charger and chuck key. Needs a new battery available on eBay Pickup welcome from Nerang Gold Coast Qld
26/07/2023
HiKOKI 18V Li-Ion Cordless Brushless 65mm C-Series 16GA Finish Nailer
HiKOKI NT1865DA 18V Li-Ion cordless brushless 65mm C-Series 16GA finish nailer in very good lightly used condition and working order. (Skin only, no battery and charger). Features: - Exceptional power and performance - Brushless Motor - Stable driving force to improve work efficiency - 20° nail angle provides better access into tight spaces - 2,400 nails per charge - Dry-fire lockout mechanism - Stable operation in various cold environments - Low running costs as there is no fuel cell - Reduced
29/03/2023
Hilti GX 120 Gas-Actuated Tool Fastening System
Hilti GX 120 gas-actuated fastening tool in good condition and working order. It can drive 750 fasteners with a single gas can and there is no battery to charge. It has a high fastening rate for high productivity and maximum efficiency. This tool is recommended for use in attaching drywall track to floors, walls, and ceilings; repetitive fastening of drywall track to concrete, concrete block, and steel; and fastening reveal strip to walls. Original case included with booklet, nail punch sleeve
27/09/2022
Powers Trak-It C3 Nail Gun, Good Condition
Powers Trak-It C3 nail gun in good used condition and working order. Description: The Trak-It C3 gas fastening system was developed for use in light-duty static applications, including attaching drywall track to concrete, block or steel, lath to concrete or block, furring strips to concrete or block, and plywood to concrete or block base materials. The system is designed for speed, efficiency and consistency. Operation of a gas fastening system does not require licensing. Features: - Att
02/06/2022
Hilti Cordless Drywall Screwdriver SD 5000-A22 with Magazine
Hilti SD 5000-A22 cordless 22V drywall screwdriver skin for drywall applications. It is in good working order and includes the SMD 57 magazine. Features: - The speed and power of a corded tool – 5000 rpm with 9.5 Nm torque - High battery capacity and very short charging time with Hilti 22V batteries - Compact design with in-line grip – for single-handed operation and better balance - Two tools in one – ready for magazine operation in a flash - Quick-release system – for tool-free, rapid
02/06/2022
Hilti 22v Drill, Impact Driver and Drywall Screwdriver Combo
Experienced 22v Hilti combo for sale, not the prettiest but all works as it should. Consists of: - SD5000-A22 drywall screwdriver with SMD57 collated screw magazine - SFH22-A drill / driver - SID22-A impact driver (drill bit release could use attention but still holds bit) - 3 x 22v Li-ion batteries - C4/36-350 battery charger Inspection welcome, thanks for looking 142606
02/06/2022
Hilti TE 1500-AVR Demolition hammer
Hilti TE 1500-AVR Demolition hammer In great working condition Comes with 3 Chisels as shown in pictures Features: Powerful electropneumatic hammering mechanism, SR motor and polygon chisels for high breaking performance Low weight and great balance for excellent handling in demanding applications Optional TE DRS-B dust removal system removes up to 95% of dust Active Vibration Reduction (AVR) reduces vibration and extends permissible periods of continuous use Applications:
02/06/2022
Hitachi CR13VA Reciprocating Saw
Hitachi CR13VA Reciprocating Saw In very good working condition Come with what is shown in pictures Inspections/test are welcome in-store Features: -Straight cutting action -Tool-less blade change -Large switch for easy operation -Variable speed -Dust and water resistant triple-sealing construction Specifications: -Pipe Diameter: 130mm (5) -Steel Plate: 19mm (3/4") -Wood: 300mm (11-13/16") -Power input: 1,010W -Length of Stroke: 29mm (1-1/8") -No Load speed (Stroke): 0-2
02/06/2022
Hilti Rotary Hammer Drill TE 2-S
Hilti TE 2-S Triple-mode corded SDS rotary hammer for hammer drilling, rotary-only drilling and precision hammer drilling. A pre-owned product in excellent working condition. Missing closure clip on genuine Hilti industrial case. Product Information, Material Safety Datasheet and Operating Instruction book included. Technical Data; Working mode - Hammer drilling , Drilling only , Fine hammer drilling. Rotation speed gear 1 under no load - 1200 tours/minute. Optimum drilling
02/06/2022