45" Wide x 60" Long (1145mm x 1524mm)
Moulded from virtually indestructable flexible U.V. stabilised Polyethylene
Purpose designed moulding to hug modern hoop type ROP Frames, with mounting kits to suit any structure.
Other sizes available from www.fsme.com.au
Mounting kits sold seperately, as needed.
Kubota 4 Tonne Excavator available for dry hire. Attachments: variety of buckets (both teeth and blade) Rock breaker, Rock Grab, Borers, Extentions, compaction wheel, Sieve bucket.
Daily, Weekly and Long term hire!!
If interested please phone Rod on: 0404 405****.
8 Tonne Excavator available for dry hire. Full mine spec, all buckets, breaker, rock grab, post hole and compaction wheel attachments available.
Daily, weekly or long term hire!!!
If interested phone Rod: 0404 405****.
Toyota Dyna 2 ton Tipper in excellent cond with new engine, roadworthy & 6 months rego. Great stereo, 2 large lockable toolboxes, ramps. Car licence.
Kubota 1½ ton excavator with under 500 hours on new engine. No licence or tickets req. to operate. 4 buckets from 200mm to 900mm. Reliable strong machines ready to work. May consider selling separately.
New unused Toyota 5SDK8 Skidsteer Loader 4 hrs on the Hour Meter but yet to be used in the dirt complete with Norm Engineering tilting crossflow 4in1 bucket set up with universal attachment plate (attachment locking pins vertical), Emergency stop, extinguisher. Paid $47,000 sell $38500 + GST
Also for sale New unused Digga Attachments at below cost prices
Auger bits 200mm,450mm & 600mm,1 metre extension
Digga PD3 & PD4 Auger Drives with (SCS) swing control 65mm round shaft suitable also for ...
Ford tow truck recently fully restored. 7.5 tonne GVM. Beaver tail tray with steel ramps, 10,000lb winch, tow bar, orange safety lights. Two brand new Century batteries, all new tyres and chrome caps, 6 bolt wheels. Would suit bobcat or excavator or tractor.
Selling unregistered, come and see this clean truck.
Im selling my Excavator. This machine was purchased soley to do work on my property and has been used privately most of its easy life.
The machine has done just under 4000hrs
The new motor has done around 100 hours
I have had the machine for around 3-4 months and i just wont be needing it soon.
In that time (aprox 20-30 hours) it has had most of the pins and bushes replaced, controll linkages, a new track motor, new hydraulic fluid, CAT hitch, new buckets a major service and
Both overall length of 510mm, one @ 80 to 70mm stepdown 350mm & one @ 80 to 75, unused, Both for $200.00
Phone anytime or view/ collect from Ladbrooke Machinery Sales, 2676 Ipswich Road, Darra, open Mon to Fri 7.00 to 5pm
323 Bobcat excavator. Great little machine fully piped for attachments plus full time rock grab. Fully serviced with new half hitch, pins and bushes. Has never had rock breaker on it. Comes with mud bucket, ripper, 450 and 300 buckets with blade. Expandable tracks to fit in tight access. Selling with 3.0 tonne McNeill fully braked trailer in great condition. Trailer has heavy duty racks on both sides and heavy duty tool box. Great for plumber or other trades. Have owned both from new and never ...
Outdoor machinery storage available just off Ipswich Road in Oxley. Located in Brisbane’s ‘Industrial Golden Triangle,’ this storage provides very convenient access to Ipswich Rd, Centenary Fwy, Logan Mwy, Gateway Mwy etc.
The site is in a safe and flood-free area and has an occupied house overlooking the storage area, which provides a good level of security. Site access can be arranged as required. Long or short term.
Cost is $25/week for storage of most vehicle-size drivable machinery ...
This is a Rock Hammer with a compactor plate attached.
It has 850psi and is nitrogen filled, it packs a huge punch.
It can be used to compact the ground close to the edge of concrete. It can be put on a 3500kg bobcat or up to an 8 tonne excavator.
compactor plate can be removed and chisel moil attached easily, two tools for the price of one.
Kubota KX41-3v 1.7 tonne Mini Excavator 2008
New swing motor replaced cost $6000
New pins, bushes and H bracket on boom and half hitch cost $3500
New battery, new starter motor , new seals in hydraulic cylinders on boom
Piped for auger/ rock breaker attachments
Rock grab bracket on boom
Rubber Tracks 80%
Expandable under carriage from 990mm to 1300mm for stability and fit through tight access
Comes with 1 meter batter bucket with replaceable cutting edge, and 300mm digging bucket
Need experienced plant operator for a full time.. Working with a 3t excavator combo, must have HR, (HC would be ideal)licence and available for weekend work.. Avr 50hrs per week.. Pay discussed as per experience.
30inch 24 volt 50amp remote controlled copper wound electro magnet ideal for scrap steel handling multi pick up points.Wall charger and 175amp Anderson plug for machine charging,pin on 13t excavator head bracket.