74 Results: New & Used in metal lathe in Australia

PICK UP FROM BAYSWATER Model: TIPL-4 (Korean made) with manual & tools as shown, used but in excellent condition. Capacity: Swing over bed: 400mm Swing over cross-spindle: 210mm Max. distance between centres: 620/1060mm Size of tool shank: 19mm*19mm Headstock: Spindle Nose: ASA-AI-6 Taper of spindle hole: MT #6 Size of spindle bore: 58mm Headstock length on bed: 440mm Number of spintle speeds: 8 (60-1500rpm) Dimensions: 1500 (1960)mm (L) x 300mm (W) x 295mm (D) Tailstock: Spindle diameter

• Other

Nuttal generation 351 lathe

Old metal Lathe for sale

Very good condition Sheraton Model A metal/engineering lathe. Made in Melbourne. Similar to Hercus. Comes with 3 jaw chuck, 4 jaw chuck, dog drive plate, fixed steady rest, selection of change gears. On a nice solid steel stand with built in coolant pump and tank. 3 phase, currently with 32 amp plug on.

Home built (not be me) Woodturning Lathe. Solid metal construction. No chuck, but includes some face plates. Purchased a few years ago. This machine got me into woodturning. I mounted it onto a slab, built a belt guard, and made some face plates. I have subsequently built myself a better machine. Needs some work to mount the motor, as I was using a different one.

Looking for a cheap metal lathe, one that needs work is fine ,just for small projects and back yard mechanics stuff ,if u can help out chuck an inbox cheers Genuine msg only no time wasters pls

RedFox lathe chucks are renowned for superior build quality and long service life. The jaws of this 5in, 4 jaw, self centring version are 16mm wide, fully hardened & fitted with dual pinions. Brand new; pick up in Wheelers Hill 3150. No PayPal - no returns. Please have correct money. Thanks. (disp)

Sale includes ... three and four jaw chucks, face plate, fixed and travelling steadies, live and dead centres and drill chuck. 240v 10 A Hare and Forbes AL250 Complete with two door cabinet stand. Has had very little use for model making and is In very good condition. Located in Glenhaven, NSW .. pick up only. contact Mark on

PICK UP FROM BAYSWATER Model: TIPL-4 (Korean made) with manual & tools as shown, used but in excellent condition. Capacity: Swing over bed: 400mm Swing over cross-spindle: 210mm Max. distance between centres: 620/1060mm Size of tool shank: 19mm*19mm Headstock: Spindle Nose: ASA-AI-6 Taper of spindle hole: MT #6 Size of spindle bore: 58mm Headstock length on bed: 440mm Number of spintle speeds: 8 (60-1500rpm) Dimensions: 1500 (1960)mm (L) x 300mm (W) x 295mm (D) Tailstock: Spindle diameter

Metal lathe Approximately 2000mm long

• Other

Brand new metal lathe still in box. See photo of specs for details.

NUTTALL metal lathe for sale Good working condition Currently on single phase but can be converted easily to 3 phase Price is negotiable

Metal Lathe 3 and 4 jaw chuck on stand with other accessories, including cutting tools Please do not email but instead call home phone number to discuss. Internet/email access is limited due to remote location. Thank you.

Inspect and pick up from Acheson Place, Coburg north 3058. Tel Used in excellent condition 250x500mm 1 up 240v single phase. Thread cutting. auto feeder and power cross feed.

• Other

Lathe is complete with motor and has both the 3 &4 jaw chucks. Comes with tooling

Macson 1500mm between centres, 3 phase, 80mm bore. Good condition, has a little wear in the ways but still a great lathe. Has 2 x 3 jaw chucks, 2 x face plates and 1 x 4 jaw chuck - all pictured. Gap is also there (on ground in last picture) just not on lathe at the moment. Also heaps of HSS tools, live dead centres, steady, spare gearing and approx 20L gear oil - all pictured. Can load here, weighs about 3.5 ton. Only selling as I have upgraded to new Lathe with DRO.

Sheraton lathe, 18inch between centres, 20mm bore, comes with 3 and 4 jaw chucks and milling attachment. Also have loads of hss tools, knurling tool and parting off tool. Single phase motor. The stock I have is also included.

Optimum hobby lathe Purchased brand new from hare and Forbes however never used. Still in original box. Includes 2 X set of lathe tooling ( as shown in pictures above. Rrp $100ea 1 X set of lathe tooling Rrp $180 1 X quick change tool post set rrp $120 1 X quick change tool post set rrp $300 1 X 4 piece chuck 1 X 3 piece chuck Additional set of metal and plastic gearing Additional set of gear belts. Plus loads more Total value of ALL brand new items exceeds $2000 by far. Cash only Pickup Birk

I have for sale, in great condition and very low hours a Paramount Browns Metal Lathe and stand. I estimate the hours to around 10 hours so has had very little use. I am only selling it as it doesn't get the use it should and has been just sitting in the shed covered up so i thought maybe someone else will put it to use. I had only ever made a few pins, bushes and bits and pieces up with it and has never really been used. Below are some specs or if you look at the Paramount Browns web site all

• Other

Precision Centre Lathe Model A circa 1953. Leather belt. Works well.

Includes quick change tool components such as boring tools plus a knurling tool, Morse tape adapters

Brand: Baumr-AG Power: 600W Input Voltage: 240V/50Hz Distance Between Centers: 350mm Swing Over Bed: 180mm Speed (High Gear): 100-3000rpm Speed (Low Gear): 100-1200rpm Swing Over Cross Slide: 65mm Spindle Bore: MT3 Tailstock Taper: MT2 Spindle Bore: 20mm Cross Slide Travel: 65mm Compound Slide Travel: 55mm LCD Display (RPM): Yes Metric Range of Threads: 0.4-2.0mm (10 Thread Pitches ) Chuck Diameter: 80mm Power Plug: Australian Standard 1 x Baumr-AG 600W Mini Metal Lathe 1 x 60° MT2 Centre 1 x L

• Other

Vintage metal lathe 3 jaw and 4 jaw chuck fixed steady spare tool holder face plates selection of gears for threading Few hss tools 1 morse taper in tail stock with drill chuck to suit Does need some tlc but does run well !!Not including stand!!