246 Results: New & Used in Other Computers & Software in Sydney Region, NSW (Page 4 of 11)

2m Fibre Pigtail ST OS1/OS2 Singlemode | 12 Pack These packs of 12 colour coded pigtail leads are used in patch panel terminations, with the fibre end of the pigtail being spliced onto the fibre run, and the connector is inserted in a coupler/adaptor on the patch panel.

The multimode OM3 cables are designed to support very high transfer speed the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.

1M(3FT) OM3 SC-SC Fiber Optic Patch Cable Multimode 10Gb is designed for high density applications in, fiber channel, local area networks, data center, premise installation, wide area networks, commercial and so on. Ideal for connecting 10G SR, 10G LRM, SFP transceivers etc. for 10G/40G/100G Ethernet connections. And it's the preferred fiber specification for 10G Ethernet connections.

Patchcord SC/APC-SC/APC, SM, 9/125 duplex, G652D fiber, 1 m Insertion Loss ≤0.20dB Return Loss ≥60dB Repeatability ≤0.1dB Durability ≤0.1 dB typical change, 500 matings Interchangeability ≤0.2dB Tensile Strength >10kg Operating Temperature -40 ÷ 80°C

Technical Specifications: Connector: LC to SC Polish: UPC to UPC Fibre Mode: 9/125 Fibre Grade: G652D Fibre Type: Simplex Jacket: 2.0mm PVC Insertion Loss: 50dB Polarity: A(Tx) to B(Rx) Wavelength: 1310/1550nm Interchangeability: < .2dB Vibration: < .2dB Operating Temperature: -40 to 75C Storage Temperature: -45 to 85C

High Quality and Cost-effective 9/125μm Single Mode Bend Insensitive Fiber Optic Cable The 9/125μm OS2 single mode bend insensitive fiber optic cable has less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can also save more space for your high-density cabling in data centers, enterprise networks, telecom rooms, server farms, cloud storage networks, and interconnect

LC-SC Singlemode Fibre Optic Cable : Yellow - 2mm Oversleeving Fibre patch cables are the thin, flexible fibres of glass that carry data, telephone conversations and emails high speed all over the world in a matter of seconds with much less interference than copper patch lead. Fibre Optic cables need less amplification to boost signals so they travel better over longer distances. singlemode fibre optic patch leads provide the connection from Ethernet 10Mbit/s to 10Gbit/s Gigabit Ethernet, they

SC-SC/APC OS1 / OS2 Singlemode Fibre Optic Duplex Cable - 2mm Oversleeving Optical fibre cables are the thin, flexible fibres of glass that carry telephone conversations and emails all over the world in a matter of seconds with much less interference than copper cables. Fibre-Optic cables need less amplification to boost signals so they travel better over longer distances. 4Cabling's SC-SC/APC OS1 / OS2 Singlemode Fibre Optic Patch Leads provide connection for high speed and legacy networks li

SC-SC/APC OS1 / OS2 Singlemode Fibre Optic Duplex Cable - 2mm Oversleeving Optical fibre cables are the thin, flexible fibres of glass that carry telephone conversations and emails all over the world in a matter of seconds with much less interference than copper cables. Fibre-Optic cables need less amplification to boost signals so they travel better over longer distances. 4Cabling's SC-SC/APC OS1 / OS2 Singlemode Fibre Optic Patch Leads provide connection for high speed and legacy networks li

SPECIFICATIONS Connector Type SC APC to SC APC Fiber Grade G.657.A1 (Compatible with G.652.D) Fiber Mode OS2 9/125μm Wavelength 1310/1550nm Insertion Loss ≤0.3dB Return Loss UPC≥50dB, APC≥60dB Min. Bend Radius (Fiber Core) 10mm Min. Bend Radius (Fiber Cable) 10/5D (Dynamic/Static) Attenuation at 1310 nm 0.36 dB/km Attenuation at 1550 nm 0.22 dB/km Fiber Count Simplex Cable Diameter 2.0mm Cable Jacket PVC (Riser/OFNR) Polarity A (Tx) to B (Rx) Operating Temperature -20 to 70°C (-4 to 158℉) Stor

This SMOF pigtail with A/SC Grade A* connectors of ÒLÓm length, is made with a ¯2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph, and Telstra Specification 1557 Part 2 Issue 6. The single optical fibre cord has the following features: coloured yellow; ¯9µm core, ¯125µm cladding and a ¯900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical prop

This SMOF pigtail with A/SC Grade A* connectors of ÒLÓm length, is made with a ¯2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph, and Telstra Specification 1557 Part 2 Issue 6. The single optical fibre cord has the following features: coloured yellow; ¯9µm core, ¯125µm cladding and a ¯900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical prop

This singlemode optical fibre patch cord with SC/A Grade A connector to SC/A Grade A connector of various lengths is supplied with 2.0 mm dia optical fibre cord. The SMOF meets G652D specification. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of minimum tensile strength of 100 Newtons, an MBR of 25mm.

This singlemode optical fibre patch cord with SC/A Grade A connector to SC/A Grade A connector of various lengths is supplied with 2.0 mm dia optical fibre cord. The SMOF meets G652D specification. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of minimum tensile strength of 100 Newtons, an MBR of 25mm.

This singlemode optical fibre patch cord with SC/A Grade A connector to SC/A Grade A connector of various lengths is supplied with 2.0 mm dia optical fibre cord. The SMOF meets G652D specification. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of minimum tensile strength of 100 Newtons, an MBR of 25mm.

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF, patch cord with A/SC to DIN47256 connectors, of various lengths, is supplied with 2.0mm dia optical fibre cord. The SMOF meets G652D specification and Telstra specification 1557 Part 2 Issue 6, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: colored yellow; 9µm core dia; 125µm cladding dia; and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member, provided under a LSZH sheath. The cord h

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi

This SMOF patchcord, with A/SC Grade A*, is made with a 2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. The single optical fibre cord has the following features: coloured yellow; 9µm core dia., 125µm cladding dia. and a 900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100N; an MBR of 25mm; abi