290 Results: New & Used in Other Parts & Accessories in Beverley 5009, SA

this is for 2 FALCON XP 14" 4 stud wheel rims. 5" wide. suits models with original 4 stud disc brakes fitted. will also fit all XK-XP models with 13" 4 stud drum brakes. if someone requires only 1 rim, we are happy to sell them individually for $150ea.. regarding condition: both need a good clean up and recondition of course. the dark coloured rim will need a good sand blasting and clean up as shown in photos 3 and 4. the light coloured rim will need some re-rolling around the outer lip in on

this is for a FALCON XK DOOR FRAME CHROME MOULDING SET. suits sedan only. 8 pieces in total. 1 curved moulding and 1 vertical moulding for each door. most of the mouldings will have a few dings on them that will need repairing of course. also includes 2 B pillar exterior chrome trims. these 2 trims will require some dent repairs. NOTE: this set would suit a daily driver or patina car easily if you do not mind the imperfections. if you are requiring a set to go on a nicer restoration, some rep

this is for a FALCON XP STEERING WHEEL. it does of course have a few cracks here and there as usual and will require the usual recondition. (i have no horn rings to suit). *** PLEASE NOTE: THIS STEERING WHEEL IS MISSING ALL THE HARDWARE UNDERNEATH THE CENTRE AREA. IT DOES NOT INCLUDE THE HORN PLATE OR THE CANCEL EARS (AS CAN BE SEEN IN PHOTO 7). for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1969/70 BOOTLID MOULDING. suits coupe and convertible. includes mounting hardware. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1967/68 BOOTLID MOULDING. suits fastback. includes mounting hardware. for more details, phone the number supplied during business hours.

this is for a new MUSTANG 1967/68 BOOTLID MOULDING. suits coupe and convertible. includes mounting hardware. for more details, phone the number supplied during business hours.

holden hj kingswood wagon, needs some work, motor runs, colum auto, south australian plates, bucket seats with center console, tow bar, rust isnt too bad, good floors and needs new exhaust

THIS IS FOR 1 FALCON XT HEADLIGHT SURROUND. SUITS LEFT HAND (PASSENGER) SIDE. REASONABLE OVERALL CONDITION. IT HAS A FEW SMALL DINGS ON THE OUTER EDGE AREA (CIRCLED) AND SOME MINOR SCRATCHES HERE AND THERE. THERE IS SOME PAINT OVER-SPRAY THAT WILL NEED CLEANING OFF. (note: we do not have any for the right hand side). for more details, phone the number supplied during business hours.

**************** LOCAL PICK-UP ONLY **************** this is for a FALCON XR ⁄ XT front valance panel. it is in very good straight condition. just needs some very minor repair on the lip as shown and a good overall clean up. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

THIS IS FOR 2 FALCON XR-XY WIRING LOOM COVERS (FIT UNDER THE SCUFF PLATES). BOTH ARE TO SUIT THE REAR AND BOTH SUIT EITHER SIDE. NO RUST HOLES AND BOTH JUST NEED A GOOD CLEAN UP. (I DO NOT HAVE ANY USED ORIGINAL COVERS TO SUIT THE FRONT). for more details, phone the number supplied during business hours.

this is for a FALCON XK-XP DOOR WINDOW REGULATOR. suits left hand (passenger side) front. fits all models except coupe. it is in good checked working condition just needing a good clean up. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XR-XY SILL PANEL. suits right hand (drivers) side. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XR-XY SILL PANEL. suits left hand (passenger) side. for more details, phone the number supplied during business hours.

this is for a new FALCON XR-XY TORQUE BOX. suits left hand (passenger) side. also suits ZA-ZD FAIRLANE. for more more details, phone the number supplied during business hours.

this is for a FORD 1961-70 F100 3 SPOKE STEERING WHEEL. this is a reproduction wheel that has been painted a burgundy colour at some stage (originally it would have been a black wheel as that is the only colour available for the reproduction steering wheels). no cracks. still in excellent condition. would more than likely need to be painted the colour you require of course. for more details, phone the number supplied during business hours

this is for a FALCON XK/XL STEERING WHEEL. this is a reproduction wheel that has been painted a burgundy colour at some stage (originally it would have been a black wheel as that is the only colour available for the reproduction steering wheels). no cracks. still in excellent condition. would more than likely need to be painted the colour you require of course. for more details, phone the number supplied during business hours

this is for 1 FALCON XK (early) DRUM BRAKE STUB AXLE. suits left hand (passenger) side. just needs a very good clean up. this stub axle only suits very early XK (1960/61) models that still has the original upper control arm with the 3 stud ball joint and the early models had a smaller hole on the stub axle for the lower ball joint. for more details, phone the number supplied during business hours.

this is for 1 new pair of 289/302/351 WINDSOR "POWER BY FORD" ROCKER COVERS. DARK BLUE. no other items included. only what is shown in the photos. for more details, phone the number supplied during business hours.

this is for a pair of FALCON XK/XL DRUM BRAKE STUB AXLES. 1 RH AND 1 LH. both just need a very good clean up. these stub axles only suit models that still have the original upper control arms with the 3 stud ball joints. they will not suit XM/XP models. for more details, phone the number supplied during business hours.

this is for 1 new FALCON XM/XP REAR QUARTER PANEL SECTION. SUITS SEDAN AND WAGON. it would be classified as a half quarter panel. suits left hand (passenger) side. for more details, phone the number supplied during business hours.

THIS IS FOR 1 FALCON XL-XP 1/4 VENT WINDOW ASSEMBLY. SUITS THE RIGHT HAND (DRIVERS SIDE) FRONT DOOR. THE GLASS HAS SOME MINOR SCRATCHES. THE ASSEMBLY OPENS/CLOSES/LOCKS AS IT SHOULD. THE SEAL IS AGED OF COURSE. THE HANDLE IS SHINY BUT WITH SOME MINOR PITTING. NOTE: this assembly is correct for the XL/XM and early XP models in that it has the "knuckle" style pivot as shown. will still fit all XK-XP body styles though except XM/XP coupe. for more details, phone the number supplied during busine

this is for a FALCON XR/XT steering box. it is the 20:1 ratio style. while turning the steering shaft throughout its full rotation, it does feel a little tight and a little "gritty". it might be more suitable to suit recondition. it has a manual steering pitman arm fitted to it. (i do not have any 16:1 ratio steering boxes or power steering pitman arms). for more details, phone the number supplied during business hours.

************* LOCAL PICK-UP ONLY ******************** this is for a FALCON XP 3 SPEED BORG WARNER 35 AUTOMATIC TRANSMISSION TORQUE CONVERTOR. condition unknown and sold as is. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

this is for a FALCON XP front valance panel. straight overall condition with no accident damage and no rust. only some minor surface rust and possibly a few very small repairs needed. also has 4 holes drilled into it probably from old spotlights. should not need too much work to bring it up nice. for more details, phone the number supplied during business hours.