Truck Air-conditioning Unit

Bought a 1997 UD PKC310 truck with an "unknown starting issue" according to the auction catalogue. It was known alright the weasels just thought it wouldn't sell if they put "stuffed motor" in the description. A busted air pipe coupler and an extremely dusty jobsite caused this engine to burn up its oil and spin a conrod bearing. After much see sawing I put a complete replacement motor in the truck. ONLY the old motor is for sale. NOTHING FROM THE REST OF THE TRUCK. This engine is a 6.9L

Still available so there is no need to ask. Pick up from Capalaba by appointment The engine is a 12 valve 6.9L FE6T rated at 220hp. The same long motor was used in almost every mid sized UD truck made from 1987 through to about 2000. After that the 24 valve FE6TB version ran until 2007. A dusty environment and a busted air pipe coupler caused this engine to wear out its rings, burn up its oil and spin a conrod bearing. Injection pump no obvious faults - was still firing when engine was d

Heavy duty 5 TONNE rachet straps . Consists of 2 units ( 2 strap lengths and 2 rachets ) . Made by Ancra Australia . Pickup from Morningside 4170 or I may be able to assist with delivery . For details - Jeff Simpson $50 for both .

These 7 inch / 178mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They have a 55W low beam filament, and a 75W high beam filament. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.

These 5.75 inch / 146mm sealed beam headlights (24 volt) are fully complaint with all Australian standards, and the correct lens for drive-on-the-left countries like us. They are the two pin 55W high beam unit. They will replace OEM sealed beam units, and older style units that were fitted with a standard globe.

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "3 pin" version designed for high and low beam operation, with 50 watts low beam, and 65 watts high beam. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "2 pin" high beam only units. Most rigs use 2 hi/lo un

These 24V Jaylec 165mm x 100mm (6.5 inch by 4 inch using the USA standard) sealed beam headlight units are designed for RHD countries like ours and meet all relevant Australian Standards. This is the "2 pin" version designed for high beam operation, rated at 55 watts. The units are a direct plug in replacement for OEM equipment. (Until stocks are exhausted we should also have available the matching "3 pin" low beam / high beam units. Most rigs use 2 hi/lo units and 2 hi only unit

Still available if you can see this. Pick up from Capalaba between 8 and 3.30 weekdays or 8 to 10.30am Sat Put new low profile tyres on a project truck then decided to go with a different size. Surplus to current requirements are some brand NEW never seen the road Kumho KRS03 295 60R22.5 fitted to NEW dealer take off 10 stud UD steel wheels. Should fit most Japanese and Euro 10 stud trucks and buses. Truck has not been driven and the tyres still have all the paint lines Two available $4

My International N1650 (UD CMA87) tilt tray tow truck was stolen from Capalaba at 4.20am on Sunday 12th Jan 2020. The thief and his accomplices were involved in an subsequent attempted theft from a Birkdale construction site the same day. Last confirmed sighting of the truck was turning off Old Cleveland Rd into New Cleveland Rd shortly after theft at 4.42am. The stolen number plates (139HEF) were used during a fuel theft at Heritage Park near Browns Plains in late february.

Still available if you can see this. Pick up from Capalaba 8 to 3.30am weekdays or 8 to 10.30am Sat This driveshaft was removed from a Mitsubishi FM515 body truck bought for parts length is approximately 1470mm truck was a non runner when bought so nothing was tested. There are no signs of damage Don't know anything else about it $100 Cash on collection No cards, payID or deliveries Also available from the FM515 small windows $30 each Rear window $70

BigCountry Ag Grain Mill - Rotary System Complete with Blower and Cyclone Separator, - Fitted with New 32 HP Diesel, - On a Good Steel Base, - Up to 10 Tons per Hour. PLEASE EMAIL: OR CALL: .

Cougar Precision Centre Lathe - 400 mm Swing, - 900 mm Centres, - Hardened V Bed, - Chucks and Camloc Spindle, - Quick Change Toolpost with Holders, - As New Order! PLEASE EMAIL: OR CALL: .

Backhoe Attachment - Brand New, - With 2 New Buckets and Rock Grab, - Suit All Cat 2 Linkages. PLEASE EMAIL: OR CALL: .