1 Results: New & Used in Hand Tools in Northcote 3070, VIC

Folds into a small case With drill heads. Can post at buyers cost

Disston Hand Saw. Made in USA

These 4 metal rulers all have a bit of age on them and are in very good condition. There are 3 x 30 cm rules and 1 x 6 cm rule, all of which are double sided. The 'longer' of the 30 cm rulers is a flexible 'Biltema' - Stainless Hardened' ruler another is a 'Micador' that was produced in Japan whilst the other loner one is unlabeled and a far more rigid workman's style ruler with thicker metal. The little 6 inch one was made in China and has 'stainless' on it. Inspection available as is local pi

These are 3, vintage inside spring calipers produced in the first half of last century and all of which are in good working order. The largest caliper has a total length of 7 inches (17.5 cm) opens to a full width of 6.5 inches (16.5 cm) and was produced in the USA by 'SAMSON TOOL Mfg' of Newark, New Jersey which is stamped on the tool. The other 2 smaller calipers are by the iconic English tool maker 'Moore & Wright' of Sheffield, England which is also stamped on the tools. They have respectiv

This is a large, vintage, outside diameter, spring caliper produced in the first half of last century by the iconic English toolmaker 'MOORE & WRIGHT' of Sheffield, England which is stamped on the tool - See pictures. This caliper which is used to measure the external size of an object is in lovely vintage condition and full working order. It's total length is 9 inches (23 cm) the length from the spring nut to the bottom of the tool is 6 inches (15 cm) and it opens to a maximum width of 8 inche

These are 2 x VINTAGE, bow cut swords that would make great decor pieces hanging up though they are both certainly still usable. The blades are rusty and would need to be either replaced or sharpened but the frames are both rock solid and the handle clips open and close again tightly. The larger orange saw has a length of 82 cm and a width of 24 cm whilst the shorter black saw with the red clip has a length of 62 cm and a width of 21 cm. Inspection available as is local pick up. Postage if requ

A pair of of vintage 'GILBOW' Tool Company Ltd 14" (350mm) tin snipes that were produced in England and are model: G245. They weigh 900 grams, and have 85mm blades that still cut but have rust on them - See pictures. Inspection available as is local pick up. Postage if required is $14.00. (PayPal, Bank deposit or Pay on pick up available).

This is a Lot Of 4 Vintage Ball Pein hammers with the older 3 being particularly vintage pieces and the 3rd, lighter handled hammer a little more recent - See pictures. The handles on the 2 thinner, older hammers are fairly worn with some rust on the heads and would be mainly collector pieces whilst the thickest handle older hammer and the newer one are still very sound and would be fine to use. Their length measurements are: 30 cm, 27.5 cm, 25 cm and 24 cm respectively and they weigh a combine

This is a NEW, SEALED & UNOPENED, WorkZone, 7 piece flat bit set that comes with a tough plastic storage case. The set contains bit sizes from 10mm to 32mm with each one titanium coated and made from high quality carbon steel. Inspection available as is local pick up. Postage if required is $10.00. (PayPal, Bank deposit or Pay on pick up available).

This is a 'BETTS' Professional 1200mm, shockproof, spirit level measuring tool. The tool is in full working order and good cosmetic condition with just one of the end rubbers missing - See pictures. Inspection available as is local pick up. (PayPal, Bank deposit or Pay on pick up available).