6 Results: New & Used in Engine, Engine Parts & Transmission in Sandgate 4017, QLD

Complete 1500 MGA long motor and gearbox as pictured with starter motor and alternator etc. Was running when removed and could be fitted straight into another BMC sports car without maintenance. Was rebuilt in the last 10000kms.

Toyota 1hdft fully reconditioned Engine, this Engine will be stripped, acid dipped and cleaned, all Engine components are crack tested and checked out before being machined and assembled back to a long Engine using our High Quality Engine Rebuild kits. This Engine will come with the following - A fully Reconditioned Injector Pump 6 Reconditioned Injectors with new Denzo Nozzles A new Hi - Flow Turbo with an eleven Blade Billet Wheel New Piston and Ring Kits New Main and Bigend Bearings New Head

Toyota 1HDFT 24 Valve Engine, this engine as been pre run and tested and will come complete with a 3month Warranty on the engine (no warranty on the bolt on accessories) as these import engines are already removed from the vehicles at the time of shipping the klm’s are unknown.We recommend the following work to be carried out prior to fitting- Supply and fit a new Water Pump and Thermostat Supply and fit a new Timing Belt kit Supply and fit a new Rear Oil Seal Bottom End Bearings - Remove

Toyota 1hdt factory turbo engine this engine had been pre run up and tested and comes complete with a 3 month warranty on the engine ( not on the bolt on accessories). As these import engines are already removed from cruises at time of shipping the klm are not know . We recommend the following work to be done prior to fitting - Supply and fit a new water pump thermostat Supply and fit a new timing belt kit Supply and fit a new rear oil seal Bottom End Bearings- Remove the sump and oil pick

Toyota 12ht engine , this is a complete pre run and tested 2nd hand import engine it comes with a 3 month warranty on the engine only ( not on the bold on accessories) we recommend doing the following extra work on all 2nd hand 12ht engines . We can supply and fit the following- New water pump and thermostat New rear oil seal Bottom end bearings- remove the sump and pickup , clean and inspect the crankcase , fit new Bigend bearings to the Conrods , resealable the sump again For more information

5 x New Automotive Drive belts. These belt were purchased as spares and have sat unused on a workshop shelf for many years, so are a bit dusty 1 x Bosch 4PK1000 Multi Rib V Belt 1 x Bosch 4PK880 Multi Rib Super Belt 1 x Bosch 5PK870 Multi Rib Super Belt 1 x Bosch 11A0815 Raw Edge Cogged Super Belt 1 x Dayco 15360 (11A0915) Top Cog V Belt