WC68 6″ PTO Wood Chipper - Delivery Australia Wide
• Huge 8.25” diameter infeed roller
• Large 6”x 8” in-feed opening
• Forward/Neutral & Reverse infeed roller operation
• Infeed roller speed control valve
• Self contained hydraulic system run off tractor PTO
• Hinged clamshell flywheel housing design for quick and easy blade changes.
• 4 reversible chipper blades
• 24” diameter / 3/4” thick / 100lb solid steel flywheel
• Flywheel speed of 540 RPM
• 5/16” thick chipper housing
• 360 degree rotating discharge chute
• Folding infeed chute for minimum footprint during storage
• 1/4” thick steel chipper base
• Commercial quality / standard sized greasable bearings
• Quick attach 3 point hitch system
• Powder coated finish
• Hydraulic hose line protectors
• 1 hour assembly time
• PTO shaft included
• Heavy duty 710 lbs overall design/weight
• 3 year warranty
The WC68 operates on tractors with 20-50 HP at the PTO. It utilizes a large 23” x 27” infeed hopper opening that tapers down to an 6” x 8” opening where the 8.25” diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼” diameter and as large as 6” diameter can be fed through the WC68. To chip full 6” diameter logs at full infeed speed, tractors with over 40 HP at the PTO is required.
Hydraulic Infeed System
Branches are pulled into the WC68 via the large 8.25” diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
The WC68 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts. Changing blades can be made very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
Folding Infeed Chute
The infeed chute on the WC68 wood chipper has a large 23” x 27” opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.
The opening in the flywheel housing is a large 6”x8” square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.
The discharge chute was designed to rotate 360 degrees by simply loosening the eye bolt and spinning it by hand to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 75” off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground.
Shipping Australia wide - Send postcode to receive freight cost
- Date Listed:15/09/2018
- Last Edited:19/05/2019
WOOD CHIPPER - PTO DRIVEN HANMEY CH-150H (HYDRAULIC FEED)
Supreme Mouse Traps, Box of 8 traps FREE DELIVERY AUSTRALIA WIDE
Wood chipper Vermeer 07/03 BC1400
Cleaning products anti cockroach, Atlas, Gle, Pro, WC.
Second Hand Ensuite Bathroom- Shower, Vanity, Basin & WC
Adidas Golf Umbrellas (68" and 58")
CERAMIC WC PAPER HOLDER
Custom Printed Cafe Umbrellas Australia Wide. Various colours
Ambient Cool Mist Aroma Diffuser BNIB free Sydney wide delivery
Free wood chip- free mulch- free wood chips delivered- free delivery