1 Results: New & Used in Boat Accessories & Parts in West Gosford 2250, NSW

3 Custom made tanks used for wine storage on board. Shiraz, Cab Sav, Port. Sizes 300mm X 200mm X 420mm High. Fitted with O ring seal to under side of circular top. Fed with pressure to supply contents. Could use as water tanks if tee-total. Will sell separately. Priced per tank.

Had to deploy it in a major storm, Works great. Held a 50 foot, 22 ton yacht on station for 2 days. 950mm high X 560mm dia. at waist. Drum and line available separately if needed.

Collectors item from WW2. Salvaged from a Catalina Flying Boat in Rock Bottom Sound, Soloman Islands. Lightweight, Stows easily, Working Order. Used as a stern anchor on world cruising yacht. Great talking piece.

Bundle includes a VDO Wind Trim gauge and six engine gauges including : Water temperature. Engine hours. Oil pressure (0-350psi. Oil pressure (0-72psi). Ampmeter(0-80A) Ampmeter (0-50A)

Fabricated from 6mm.marine aluminium. Mast mount by 4 screws each sides measuring internally 130mm side to side at holes. Will accept scanners up to about 900mm dia.

Removed from Yacht during Perkins re-engineing job. Red ones were used for cooling Paragon Gearbox oil, and a Hydraulic Tank oil. Both have anodes. Cast Bronze construction 330mm long, 90mm endcap dia. Hose tails 25mm. Blue one is Bowman make. Alloy. 280mm long, 90mm Barrel Dia.

Raymarine Pathfinder Radar Scanner. (Dome only, Display not available) Product Code M92650-S. 2D. 18" Dia. 2Kw. Handbook. Comes with 15M Cable attached.

• Custom

All custom marine stainless and metal fabrications.

• Evinrude

Evinrude 150 Ficht V6 1998 Has done a big end so 1 conrod and crank u/s.. so I’m parting it out.. Parts available from $10 I have cable steering Gearbox XL 25” Emm. 15 x 15 alloy prop Plus a few other bits still left I also have an extra 6 injectors in very good order. All parts except for the obvious are in good working order Nearly all parts will fit 175hp as well

Furuno Radar Model 1721 removed from yacht. Updated with later colour model. Furuno display is green LED, but the connecting cable to the scanner was built into furniture and had to be left in situ, will need a replacement cable. The connecting plug to the display is supplied. A operators manual and a magnified sun hood is supplied Being sold as is, for refit or spares.