We found 51 additional ads in surrounding suburbs.
Click here to see all resultsFront End Loader Round-Bale Grabber / Soft Hands, EuroHitch Type
⭐⭐⭐Front End Loader Round-Bale Grabber / Soft Hands, 🚜 EuroHitch Type ⭐⭐⭐ CHECK YOUR FITTINGS 1ST...SEE DIAGRAM ✅ Front End Loader Round-Bale Grabber ✅ Suits a wide variety of bales especially plastic wrapped or typical twine tied ✅ 800kg max. weight ✅ 1,600mm max. opening ✅ Standard EuroHitch fitting ...CHECK YOUR FITTINGS 1ST ✅ High capacity hydraulic ram ✅ Multiple grease-points for smooth operation ✅ Rear 'legs' for proper support when un-hitched and sitting on the ground - also makes hit
28/05/2022
Brush Cutter Attachment
Skid Steer Attachment Specifications: Cutting Width: 1828mm Required Operating Flow: 75-115 liters/minute Operating Pressure: 16 megapascals (MPa) Shipping Dimensions: 2240mm Length x 2090mm Width x 620mm Height Weight: 500 kilograms
18/04/2024
Levelling Blade
To Suit Skid Steer Heavy Duty Cutting Edge 1825mm W Title Angle: 22.5 degrees Operating Pressure: 16MPa Shipping Dimensions: 1930mm L x 1060mm W x 740mm H Weight: 310kgs
18/04/2024
Grapple Attachment
Unused Grapple Bucket to Suit Skid Steer to suit Skid Steer 1828mm wide Operating pressure: 17-21MPa Dual Ram Approximate Shipping dimensions: 1930mm L x 1100mm W. x 790mm H Weight: 275Kgs
18/04/2024
Rock Bucket
To Suit Skid Steer Shipping Dimensions: 1950mm L x 1060mm W x 600mm H Weight: 190kgs
18/04/2024
Sweeper Broom
Unused Sweeper Broom Attachment To Suit Skid Steer, 1800mm Wide 0.4 Cubic meter Capacity, Required Operating Flow: 50 – 125L/m Operating Pressure: 16MPA Approximate Shipping Dimensions: 2240mm L x 1365mm W x 785mm H Approximate Weight: 520kg
18/04/2024
Tiller Attachment
Unused Tiller Attachment, To Suit Skid Steer 1850mm Wide, Operating Pressure: 16-21 MPA Scarifying Width: 1520mm, Scarifying Depth – Adjustable from 0mm to 120mm The required flow is from: 50lpm to 75lpm Approximate Shipping Dimensions: 2180mm L x 740mm W x 720mm H Approximate Weight: 360kg
18/04/2024
Auger Attachment
To Suit Skid Steer Comes with 1 x 12 Inch Auger Required Operating Flow: 50-75 L/min Operating Pressure: 16MPa Shipping Dimensions: 1210mm L x 1110mm W x 810mm H Weight: 240Kgs
18/04/2024
Brush Cutter Attachment
Suits Skid Steer Cutting Width: 1828mm Required Operating Flow: 75-115L/min Operating Pressure: 16MPa Shipping Dimensions: 2240mm L x 2090mm L x 620mm H Weight: 500kgs
18/04/2024
Concrete mixer Bucket
To Suit Skid Steer Bucket Capacity: 0.35 Cubic Metres Required Operating Flow: 75 – 140L/m Operating Pressure: 16-21 MPA Shipping Dimensions: 1700mm L x 920mm W x 800mm H Weight: 525 Kgs Model Type 1
18/04/2024
