0 Results: New & Used in backhoe in Lismore Region, NSW

Tilt Hitch with Manual Hitch....Was bought for my JCB Backhoe but does not fit....So please take note of the following measurements. Pins 45mm Top Pins Centre to Centre 355mm Bottom Pins Centre to Centre 345mm Between Pin Ears 170mm

The price includes GST. Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket. Condition is used and there is some light surface rust, but is otherwise a good solid bucket in great shape with little wear, and has plenty of life left. The cutting sides have extra reinforcing plates welded for durability. Current Headstock configuration: 28.5mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins. 203mm Pin Center to

The price includes GST. Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket. Condition is used and there is some surface rust, but is otherwise a good solid bucket, and has plenty of life left. Current Headstock configuration: 29mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins. 202mm Pin Center to Pin Center (CtoC). 81mm Between the Ear Plates (BTE), 75mm Between the flanges of the rear pin hole bosses (but

The price includes GST. Used 350mm Backhoe & Excavator GP Digging & Trenching Bucket. Condition is used and there is some surface rust and some pitting in the bottom, but is otherwise a good solid bucket with little wear, and has plenty of life left. The cutting sides have extra reinforcing plates welded and there is an extra wear strip welded underneath for durability (see pic# 10). Current Headstock configuration: 30mm Pin Diameter, 215mm Pin Center to Pin Center (CtoC), 84mm Between the

The price includes GST. Used 400mm Excavator & Backhoe GP Digging & Trenching Bucket, suit 1.5-4 ton ton machines. Designed for Case CX 23 / CX 25 / CX 28 / CX 30 / CX 31, Kobelco SK 20 / SK 20SR-3 / SK 24 / SK 25 / SK 25SR / SK 25SR-2 / SK 27 / SK 27SR-2 / SK 27SR-3 / SK 30, New Holland EH 27.B, Takeuchi TB 25 / TB 26 / TB 28FR / TB 125, Yanmar B 22 / VIO20 / VIO20-1 / VIO20-2 / VIO20-3 etc. but will fit other machines (see below list of machines we have found so far). Condition is used and

The price includes GST. Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket suit 3-7 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket. The Headstock Ears are 32mm thick! Has tapered sides so mud slides out easy and minimises ground resistance. There is also extra wear strips welded underneath for durability (see pic# 10). Quality Bucket Made in Australia by Jaws. Current Headstock configuration: Front Pin: 45mm, but it is sitting in

The price includes GST. New Miller Backhoe Excavator Mechanical Quick Hitch Coupler to suit Caterpillar Backhoe 416D, 416E, 420D, 428 C3, 428 C3D, 432 C3, 438 C3 and possibly other 3-9 Ton Excavators. Want a quick hitch but don't have any spare auxiliary hydraulic lines for a hydraulic hitch? This hitch is identical to a hydraulic hitch setup except you lever the pin clasp open and closed with a rod that compresses the spring. There is no need to pull either of the pins out of your buckets e

The price includes GST. New Doherty D-Lock Backhoe Hydraulic Multi Hitch to suit Case 590ST Backhoe. D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 341mm-371mm Pin Center to Pin Center range. Very low profile & light weight. Condition is New & Unused, there are just a few scratches and paint chips. Strong and well enginee

The price includes GST. New High Capacity (250 Liters) 300mm Doherty / RF-System, Excavator / Backhoe Deep Trenching Banana Gummy Bucket suit 4-12 Ton machine. Strong and well engineered, made in Sweden by RF-System AB (RF): https://rf-system.se/en/ It was surplus stock from Doherty Couplers and Attachments (Australia & New Zealand), who add headstocks to these skins and rebrand as Doherty buckets. The side cutting edges are thicker than the rest of the bucket to help reduce wear, and it has

The price includes GST. New Jaws built Excavator Ripper, suit 5-10 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. This is a very solid, quality built Ripper Made in Australia by Jaws: https://www.jaws.com.au Originally designed for John Deere 315SG (55mm/50mm pin setup), but the Front Pin has been milled down to 50mm so both pins are now 50mm. You could easily reinsert another 55mm pin if you want to set it back to a John D