45 Results: New & Used in hyundai in Queensland

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.

The price includes GST. New 200mm Excavator Digging & Trenching GP Bucket suit 1-3 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Some buckets have the manufacture's nameplate affixed, some do not, but all are the same. We have this bucket in 2 different Headstock Configurations: *** 1st Headstock configuration: 30mm Pin Diameter, 124mm Pi

The price includes GST. Used Caterpillar 400mm Excavator Digging & Trenching GP Bucket suit 1-3 Ton machine. Condition is used and there is some light rust and pitting from water sitting in it. But this is a well engineered, good solid bucket with plenty of life left. It has bolt-on removable Side Cutters, and has Tapered sides so mud slides out easy and minimises ground resistance. There is also extra wear strips welded underneath for durability (see pic# 9). This is a quality bucket made

The price includes GST. New 800mm AHE Excavator Mud Batter Bucket Bucket suit 1-3 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Some buckets have the manufacture's nameplate affixed, some do not, but all are the same. We have this bucket in 2 different Headstock Configurations: *** 1st Headstock configuration: 30mm Pin Diameter, 124mm Pin

The price includes GST. New Excavator Hydraulic Thumb Grapple Grab Bucket suit 1-3 Ton machine. The bucket moves as a normal bucket attached to your hitch or directly to your dipper arm. The Thumb moves Hydraulically. Designed for Rock & Log work, but can also be used for demolition and general material handling, picking things up, moving them around and other careful placement tasks. Required Oil Flow: 25-30 L/min. Working Pressure: 100-110 bar. Headstock Dimensions: * The Pin Diameter is

The price includes GST. New 250mm Atlas Heavy Engineering (AHE) Excavator Digging & Trenching GP Bucket suit 3-7 Ton machine. Designed for Bobcat E55, Hitachi EX 58MU, Komatsu PC 40/PC 45R-8/PC 45R-8E/PC 58UU-3, Kubota KH151/KH161-3/KH191/KX151/KX161-2/KX161-3/KX191/RX501/U45, Yanmar YB 50 etc. but will fit other machines (see below list of machines we have found so far). This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but h

The price includes GST. Used 300mm Excavator GP Digging & Trenching Bucket suit 3-7 Ton machines. Designed for Kubota KH151 / KH161-3 / KH191 / KX151 / KX161-2 / KX161-3 / KX191 / RX501 / U45 etc. but will fit other machines (see below list of machines we have found so far). Condition is used but it is a sturdy bucket with plenty of life left. The width is tapered so mud slides out easily and it comes with 2 extra spare teeth as pictured The side cutting edges are extra thick and there are

The price includes GST. New 350mm Kubota Excavator Digging & Trenching GP Bucket suit 3-7 Ton machine. Designed for Kubota KH151 / KH161-3 / KH191 / KX57 / KX151 / KX161-2 / KX161-3 / KX191 / RX501 / U45 / U55 etc. but will fit other machines (see below list of machines we have found so far). This bucket has come from surplus stock. It is New & Unused but has some paint scuffs from warehouse storage & handling. Has tapered sides so mud slides out easy and minimises ground resistance. The b

The price includes GST. New 450mm Atlas Heavy Engineering (AHE) Excavator Digging & Trenching GP Bucket suit 3-7 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Designed for Bobcat 337/435/E55/X335/X337/X341, Case CX 47/CX 50B, IHI (Cheiftain) 40G/H/J, IHI 45J, Kobelco SK 40SR-2/SK 40SR-3/SK 45SR-2/SK 45SR-3/SK 50SR-3, New Holland EH 50.B, Pel

The price includes GST. New 550mm Atlas Heavy Engineering (AHE) Excavator Digging & Trenching GP Bucket suit 3-6 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Designed for Bobcat 337/435/E55/X335/X337/X341, Case CX 47/CX 50B, IHI (Cheiftain) 40G/H/J, IHI 45J, Kobelco SK 40SR-2/SK 40SR-3/SK 45SR-2/SK 45SR-3/SK 50SR-3, New Holland EH 50.B, Pel

The price includes GST. New 600mm Atlas Heavy Engineering (AHE) Excavator Digging & Trenching GP Bucket suit 3-7 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but there was some paint scuffs & chips from warehouse storage & handling, we have given it a quick paint just to preserve it further. Designed for Hitachi EX 58MU, Komatsu PC 40 / PC 45R-8 / PC 45R-8E / PC 58UU-3, Kubota KH151 / KH161-3 / KH191 / KX151

The price includes GST. New 600mm Atlas Heavy Engineering (AHE) Excavator Digging & Trenching GP Bucket suit 3-7 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs from warehouse storage & handling. Designed for Hitachi EX 58MU, Komatsu PC 40/PC 45R-8/PC 45R-8E/PC 58UU-3, Kubota KH151/KH161-3/KH191/KX151/KX161-2/KX161-3/KX191/RX501/U45, Yanmar YB 50 etc. but will fit other machines (see be

The price includes GST. New High Capacity 1200mm AHE Excavator Mud Batter Bucket Bucket suit 3-7 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has sat in a warehouse for a while, and there is some pitting in the bottom, we have cleaned it up and given it a fresh paint to protect it. Designed for Bobcat 337/435/E55/X335/X337/X341, Case CX 47/CX 50B, IHI (Cheiftain) 40G/H/J, IHI 45J, Kobelco SK 40SR-2/SK 40S

The price includes GST. Used 600mm Excavator Flat Edge Blade Trenching Bucket suit 10-20 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket with thick front edge cutting plate. There is also extra wear strips welded underneath for durability (see pic# 10). There are holes ready for bolt-on side cutters if needed. Current Headstock configuration: 65mm Pin Diameter, 420mm Center to Center, 305mm Between the Ear Plates (255mm Between the Ear Bosse

The price includes GST. Used 1500mm Atlas Heavy Engineering Excavator Hydraulic Tilting Mud Batter Bucket suit 9-20 Ton machines, with Topcon TS-1 Tilt Sensor. Designed for Hitachi EX110-5/EX135/EX120-2/EX120-3/EX120-4/EX120-5/EX135UR, Hitachi Zaxis 135US, John Deere 135C RTS, Kobelco K905/SK120/SK130/SK135/SK135SR, Sumitomo SH120-3/SH125-3/SH125X-3/SH130-5/SH135-3/SH135X-3, Takeuchi TB1140 etc. but will fit other machines (see below list of machines we have found so far). Twin Ram design, t

The price includes GST. 70mm pin Excavator / Backhoe Headstock to suit 12-21 ton machines. There is some light surface rust and a few small dings but is otherwise in good condition, was cut off a bucket to fit a different sized headstock. Designed for Hyundai R160LC-3/R170W/R180LC-3, Kobelco ED180/SK160LC/SK170-6E, Komatsu PC150/PC150-5/PC150-6/PC160/PC160-6/PC160LC-7/PC180, New Holland EH160LC etc. but will fit other machines (see below list of machines we have found so far). Can be used fo

The price includes GST. 70mm pin Excavator / Backhoe Headstock to suit 12-23 ton machines. There is some light surface rust but is otherwise in good condition. Designed for Caterpillar 315 / 315B / 315B L / 315C L / 317 etc. but will fit other machines (see below list of machines we have found so far). The sturdy Box Frame below could be used for some specialist attachments or cut the headstock off to use it for a standard mounting headstock for a Rock Breaker Hammer or Auger, or mount as a

The price includes GST. Used 980mm Excavator GP Digging Bucket suit 12-36 Ton machine. Condition is used but there is still plenty of life left. This is a heavy duty bucket with 35mm thick headstock ears, side cutting edges & reinforcing plate. There is also extra wear strips welded underneath for durability (see in pic #9 & #10). There is one tooth missing. Current Headstock configuration: 70mm Pin Diameter (inside Bosses thick enough to be bored out to suit 80mm or 90mm pins), 531mm Center

The price includes GST. Used Excavator Hydraulic Quick Hitch Coupling to suit 15-32 Ton machines. The front hooks that grab the bucket's front pin have been extended (see pics# 4, 6, 9) to pick up attachments with a longer Pin Center spacing (full details below). Condition is Used, but is otherwise in good working condition with plenty of life left. Has Rear Lifting Eye Hook. *** Pin Setup Dimensions (where your Dipper Arm/Stick goes in): * Pin Diameter: 80mm. * Pin Center to Pin Center (

The price includes GST. New 80mm pin, 600mm Doherty Excavator Deep Trenching Cleanup Gummy Banana Bucket suit 15-32 ton machine. This is a thick & sturdy, well built bucket. The front cutting edge plate and Ear Plates are 32mm thick. Current Headstock configuration: 80mm Pin Diameter, 475mm Pin Center to Pin Center (CtoC), 336mm Between the inside Ear Bosses (which can be shaved back up to 356mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in). Sho

The price includes GST. New 1200mm Excavator Skeleton Sieve Riddle Bucket suit 15-30 Ton machine. Front digging edge is 40mm thick and 300mm deep. Extra side cutter plates welded on. Current Headstock configuration: 80mm Pin Diameter, 452mm Pin Center to Pin Center (CtoC), 328mm Between the inside Ear Bosses (which can be shaved back up to 387mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in). Should fit: Case 9021 / CX210 / CX210B / CX225SR, Cat

The price includes GST. New 1200mm Warrior Heavy Duty Excavator GP Digging Bucket suit 15-32 Ton machine. This is a very thick & sturdy, well built bucket. The front cutting edge plate is 40mm thick! It has a deep profile for a high capacity of 0.96 cubic meters. It has removable bolt-on Side Cutters. There are extra wear plates attached to the sides and also extra wear strips welded underneath for durability (see pic# 10). Current Headstock configuration: 80mm Pin Diameter, 460mm Pin Cent