20 Results: New & Used in volvo 360 in Australia

The price includes GST. Used 1500mm Atlas Heavy Engineering Excavator Hydraulic Tilting Mud Batter Bucket suit 9-20 Ton machines, with Topcon TS-1 Tilt Sensor. Designed for Hitachi EX110-5/EX135/EX120-2/EX120-3/EX120-4/EX120-5/EX135UR, Hitachi Zaxis 135US, John Deere 135C RTS, Kobelco K905/SK120/SK130/SK135/SK135SR, Sumitomo SH120-3/SH125-3/SH125X-3/SH130-5/SH135-3/SH135X-3, Takeuchi TB1140 etc. but will fit other machines (see below list of machines we have found so far). Twin Ram design, t

The price includes GST. Used 980mm Excavator GP Digging Bucket suit 12-36 Ton machine. Condition is used but there is still plenty of life left. This is a heavy duty bucket with 35mm thick headstock ears, side cutting edges & reinforcing plate. There is also extra wear strips welded underneath for durability (see in pic #9 & #10). There is one tooth missing. Current Headstock configuration: 70mm Pin Diameter (inside Bosses thick enough to be bored out to suit 80mm or 90mm pins), 531mm Center

The price includes GST. 90mm/80mm pin Excavator Headstock to suit 17-36 ton machines. There is some surface rust and light pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. The 2 fins could be cut off to make a standard flat plate headstock. The 90mm Pin could be milled down in the middle to make an all-80mm pin headstock. Or the 80mm pin could be sleave

The price includes GST. Used 1250mm Excavator Flat Edge Blade Trenching Bucket suit 18-36 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket with bolt-on side cutting edges & thick front edge cutting plate. There is also extra wear strips welded underneath for durability (see pic #10). There is a small tear near the rear of the left hand side (see pic #9) which can be easily welded up. Current Headstock configuration: Front Pin Diameter is 90mm

The price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,

The price includes GST. Used G-Tex Excavator Hydraulic Coupler Quick Hitch to suit 20-36 Ton machines. Designed for Komatsu PC300/PC340/PC350/PC360 etc. but will fit other machines (see below list of machines we have found so far). Condition is used with a few bangs and scrapes but is otherwise in good condition with plenty of life left. This is a quality built Hitch made in Australia by G-Tex. 90mm Pin Diameter. 513mm Pin Center to Pin Center (CtoC). Between The Ears (BTE): 340mm width whe

The price includes GST. 90mm pin, 750mm Titan Excavator GP & Trenching Bucket suit 22-40 ton machine. It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). The front cutting edge plate is 50mm thick! Condition is used but it has had very little use, with minimal wear on the teeth and almost no wear on the side cutting edges. This is a thick & sturdy, well built bucket, made in Australia by

The price includes GST. New 800mm AHE Excavator Digging & Trenching GP Bucket suit 15-40 Ton machine. This bucket is surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It has a deep profile and is in perfect New condition. It has removable bolt-on Side Cutters and is fitted with Genuine Caterpillar Teeth. There are also extra Wear Strips welded underneath for durability (see pic #10). The cutting edges of the sides of the bucket are 32mm thick. *** Current Headstock c

The price includes GST. 90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...). It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick! Condition is used but it has had

The price includes GST. Used, Solid & Deep, Heavy Duty Excavator Ripper, suit 20-50 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. This is a seriously chunky Ripper with a solid Shank thickness of 100mm (see pics# 4 & 8). This Ripper has 100mm Diameter Pins which have been milled down in the middle to 90mm (see pics#9 & 10). They could easily be replaced back to normal 100mm pi

The price includes GST. Used 545mm Wide Drum, Titan Excavator Compaction Wheel suit 22-50 Ton machines. 4 rows of pads and fitted with dual Mud Scrapers between the pads. Conditions is used, it has a few bangs & dints but rolls smooth and has plenty of life left. It has had several Headstock Pin Spacing modifications done which allows for a greater range of machines it can fit. This is a well engineered, heavy duty Compaction Wheel, made in Australia by Titan Manufacturing. Drum: * Width: 5

The price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 21-48 Ton machines, but is designed to allow a 90mm Pin machine to pickup attachments with 90-100mm Pins and a wider Pin Center distance. Made for Machines: Daewoo DX300 LC / Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK250LC / SK290LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC30

The price includes GST. Used 1500mm Excavator Heavy Duty Mud Bucket suit 23-47 Ton machine. Condition is used and it has a few bangs and a dent underneath but has had some professional repairs and it is a very sturdy bucket with plenty of life left and has lots of extra welds on the wearing surfaces. It has Tapered sides so the mud slides out easily and there is also extra wear strips welded underneath for durability (see pic#10). Current Headstock configuration: Front Pin Diameter is 100mm,

The price includes GST. 100mm pin Excavator Headstock to suit 30-46 ton machines. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Headstock setup: 100mm Pin Diameter, 570mm Pin Center to Pin Center (CtoC), 422mm Between the inside Ear Bosses (which can be shaved back up to 458mm between the Ear Plates if you ne

The price includes GST. New 810mm Wide Drum, Excavator Compaction Wheel suit 25-50 Ton machine. 4 rows of pads. Fitted with dual mud scrapers between the pads. Drum: * Width: 810mm. * Curved Steel Plate thickness: 25mm (see pic#8). * Curved Steel Plate Diameter: 1005mm (not including pads). * Total Diameter including pads: 1185mm. Pads (tapered): * Height: 90mm. * Size at Top: 120mm wide x 140mm long. * Size at Base: 130mm wide x 225mm long. Frame Steel: * Vertical Side Plate thickness: 30m

The price includes GST. Used Heavy Duty Excavator Hydraulic Vibratory Plate Compactor suit 30-46 Ton machine. Condition is used but there is plenty of life left. However 2 of the 4 Rubber Dampers will need replacing soon (see pics #8 & #9), these are just fitted in place with 8 bolts and can be purchased from places like this: https://seemark.com.au/products/hydraulic-compactor/ The Hydraulic Motor is made in the USA by Permco Inc. The Headstock is removable, but the current Headstock Confi

The price includes GST. 100mm & 110/80mm pin Excavator Headstock to suit 25-46 ton machines. There is some light surface rust and a few bangs around the mount plate but is otherwise in great condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Current Headstock setup: One Pin is 100mm Diameter the other is an 80mm pin that has a sleeve (tube) fitted over it to make it 110mm. 555mm Pin Center

The price includes GST. Almost New Excavator Demolition Ripper, 5.7m long, suit 28-50 Ton machine. Great for getting to those hard to reach spots up high, out far, or down down very low. Would most suit demolition, a big machine with 110mm Pins can now reach 2 floors higher for knock downs etc. It has a full 28-50 ton headstock welded to some serious I-Beam, and with just a small ripper on the end to reduce the weight at distance. Just enough to poke through bricks, rip up timber, sheet and

The price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,

Free Postage. 1983. VOLVO 360GLT. Original Article. Check out my other 300 items. Australia wide free postage. Paypal or bank transfer available. Your item will be packed with a plastic sleeve, folder & cardboard. This is an original Australian vintage memorabilia item. Please check out my other advertisements, articles & brochures. Kindest regards, Scottie. sdfwd8e3csdf