ADVERTISEMENT

Search alert

Get notified when new items are posted

Filter & Refine

  • project boat
project boatWestern AustraliaClear all
Most recent
17ft boat Center console

17ft boat Center console

$3,500 Negotiable
  • Single Hull
  • Dealer used
  • 17 ft
  • Johnson

NEED GONE BY END OF FEB!!!! selling negotiable price on my project boat i dont have time and space for anymore! Johnson 70hp just had $1000 services hull is good nick had full rebuild from inbroad to outboard (can hold up too 150hp) all paper work boat regoed, trailer is not! inbox me if interested. legit buyers only Will trade for tinnie or dirt bike/motard!

Stirling AreaCoolbinia

7 hours ago

Boat, Trailer and Outboard - Project almost finished.

Boat, Trailer and Outboard - Project almost finished.

$1,800 Negotiable
  • Voyager

Voyager 5M Runabout. With 50hp evinrude Good condition. 5 metres or 16 foot long (Point to outboard). Fishing, Crabbing, Tow a Tube or leisure. ---------------------------------------------------------------- 1. Boat. Is in good condition. Has had a small repair to damage caused by trailer in rough conditions. Steering is a bit stiff. 2. Trailer. Has been rebuilt and is ready for inspection. Comes with Light Board. 3. Motor. Has very good compression in both cylinders (More than 125 psi.

Rockingham AreaWaikiki

18 hours ago

Project Boat

Project Boat

$1,300 Negotiable
  • Single Hull
  • 15 ft
  • Sunray

4.7m Arrowcraft- Sunray hull, unlicensed. Trailer also unlicensed but in good condition. Comes with all new deck fittings (rod holders, bungs) only thing I don’t have is gunwhale rubber. Yamaha 75 2 stroke engine, not sure what’s the go with it never had time to check it over properly, does need new fuel pump. Forward controls need some attention as does the steering cable. Hydrofoil include. Front seat removed by previous owner, this would be the majority of work before it’s ready for the wate

Busselton AreaBroadwater

15/02/2019

Project boat

Project boat

$2,500 Negotiable
  • Single Hull
  • 19 ft
  • Glasscraft

19' Tiller Steer. Self bailing floor, built in storage / bench seating, floor lockers. Certified by Naval Architect comes with build plate and documentation. Designed for Mercury Big Tiller power steering. Professionally fibreglassed and flocote by GT fibreglass. Huge amount of work has gone into this build. If you're after a bulletproof boat for diving, fishing or pulling pots, stop, here it is.

Joondalup AreaHeathridge

15/02/2019

Boat project dive &fish

Boat project dive &fish

$4,500
  • Single Hull
  • Custom

New fibreglass hull 18 ft on trailer great custom build design yourself with free outboard 75hp

Joondalup AreaHeathridge

15/02/2019

16 foot boat and trailer unlicensed

16 foot boat and trailer unlicensed

$450 Negotiable
  • Single Hull
  • 16 ft
  • 1D

unfinished project boat and trailer need work good cheap project for some one make a offer

Rockingham AreaCooloongup

14/02/2019

SWAP 24 FOOT DIESEL POWERED

SWAP 24 FOOT DIESEL POWERED

Swap/Trade
  • Single Hull
  • 24 ft
  • Glasscraft

Glasscraft Wildcat 200HP VOLVO DIESEL Awesome boat, swap for 18 to 20 foot vessel..NO PROJECTS OR UNREALISTIC DREAMING OFFERS PLEASE around 20K value.Cash adjustment either way.

Rockingham AreaRockingham

14/02/2019

17ft boat for sale $1500

17ft boat for sale $1500

$1,500
  • Single Hull
  • Fibreglass

Hi up for sale is my unfinished project New seats New Carpets New canopy New winch New fuel tank I have new wheel hubs and wheels to go on Has a 55h motor on the back I have turned it over but not played about with it. Boat and trailer not registered but not much to do.thanks for looking.

Perth City AreaPerth

11/02/2019

Runabout 4.65M swiftcraft

Runabout 4.65M swiftcraft

$600 Negotiable
  • Runabout

Hi selling this project boat, Hull is mint condition don’t have the time to work on her, has a few extras fuel tank gauges, anchor, pump. Comes with licensed trailer which has new wheel hubs fitted and brand new mounts for axle. All round good start for someone wanting a project. Priced to sell.

Mandurah AreaMadora Bay

09/02/2019

Fraser 21 foot

Fraser 21 foot

$4,000 Negotiable
  • Single Hull
  • Fraser

21 foot Fraser 21 foot fibre glass half cabin is a good solid project boat licensed with unlicensed tandem trailer it has a 165 hp 6 cylinder mercruiser unknown condition with gearbox removed $4000 or make an offer not a stupid offer .call Greg

Rockingham AreaRockingham

09/02/2019

Marine Repairs

Marine Repairs

Negotiable
  • Other

Hitech Fibreglass & Paint Repairs Not only are Hitech fibreglass mobile but we also have a secured workshop located in Wattleup which we can carry out any kind of work, even full resprays to minor paint repairs. We can even arrange for your pride and joy to be picked up and dropped off to save you the hassle of transport. Hitech Fibreglass specialise in; *Marine, commercial and Mining Sectors * Marine Detailing * Fibreglass repairs * Application of protective coatings (aluminium, steel a

Cockburn AreaHenderson

09/02/2019

Project boat

Project boat

$500
  • Single Hull
  • Fibreglass

Hi I have a project boat that I no longer am interested in it is a fibreglass over wood boat and is very sturdy . I don’t have the money or the time to fix her up . Trailer is very solid but not rego it has an electric winch to help get the boat on .

Victoria Park AreaVictoria Park

08/02/2019

Boat Custom Fibre Glass 16 ft with Brand New Yamaha 90 HP

Boat Custom Fibre Glass 16 ft with Brand New Yamaha 90 HP

$22,000 Negotiable
  • Single Hull
  • 16 ft
  • Custom

Boat Custom Fibre Glass 16 ft with Brand New Yamaha 90 HP Engine AWESOME CONDITION ! Project thats 90% Complete as I need to sell due to have to get funds for a new work van and work comes before pleasure. Brand New Yamaha Outboard Engine 90 HP, Four Stroke ! Engine was fitted by Shivers Marine ! Fibre Glass Hull, Has Shaded Roof attached, railing and ladder to climb onto boat from water ! Great Looking Color, Comfy Seats and Kool looking Stearing Wheel. Not muc

Melville AreaKardinya

07/02/2019

16ft half cabin project boat

16ft half cabin project boat

$1,000 Negotiable
  • Single Hull
  • 16 ft
  • Other

16ft half cabin project boat perfect for crabbing. Needs a working engine, comes with 55hp mariner that hasn’t started in several years. hull has been extensively renovated with new under deck bouyancy foam, repainted deck, new marine grade carpet, new cabin compartments, the electronics need attention. Trailer comes with fully working light bar and electric winch. Selling as bought a new boat half way through the project and need the space. Boat and trailer unregistered.

Nedlands AreaClaremont

07/02/2019

Deepwater 28 Fly Bridge

Deepwater 28 Fly Bridge

$11,500
  • Single Hull
  • Dealer used
  • Other

Looking for a flybridge cruiser project that’s halfway through its refurbishment? Then this Deep Water 28 is just what you need! The engine bay is capable of twins and the transom has been all glassed up so you can pick your power plant and install as required. New fuel tank and stainless steel works are complete, with some new interior cushions including the hull liners have been replaced in areas. The galley is ready for final fit-out as is the bathroom. Upper deck on the flybridge the dash h

Joondalup AreaKingsley

07/02/2019

Boat with 150hp

Boat with 150hp

$23,000 Negotiable
  • Single Hull
  • 22 ft
  • Other

Expression of Interest Project boat 90% done. Or 100% done if you are not concerned about paint or cosmetics. No money to spend. Only selling due to having a staff member steal 25k from my business before Christmas. Boat is registered as a Chivers. It is believed to be a late 70’s Fraser before they purchased Pacemaker. These are renowned WA hulls. The boat sat in my mates shed for 10 years before I started the following upgrades in October Trailer All new LED lights Braked

Rockingham AreaRockingham

02/02/2019

6.1m penguin huntress 140hp efi suzuki

6.1m penguin huntress 140hp efi suzuki

$6,000
  • Single Hull
  • 20 ft
  • Penguin

Good boat. Very stable. Needs a good tidy up. Motor runs well. Recently replaced water pump. Its a 1996 suzuki dt140 EFI. Fuel & oil injected. Has a 65l tank. Everything on the boat works. Has epirb & flares but are out of date. Comes with sand & reef anchor. Great project that you can use. Boat & trailer are licensed. Trailer has been mostly rebuilt. New frame, springs, lights & wiring. No swaps thanks. $6k FIRM

Murray AreaNorth Yunderup

02/02/2019

Boat needing renovating

Boat needing renovating

$2,990 Negotiable
  • Single Hull
  • 16 ft
  • Glasscraft

4.90 meter Glasscraft built in 1968. Dad bought her in 1972 so it has been in the family for 46 fantastic boating years. I bought the John papas trailer 2 and a half years ago , its fourth trailer new ,and the 70 hp Johnson ( its fourth motor ) has been a terrific motor and religiously serviced every year, --- why so cheap ?? She needs extensive fibre glass work to her hull and all the electrics need doing, spent $1600 for new steering legs etc last year, Renovators looking for a project??

Rockingham AreaSafety Bay

30/01/2019

PROJECT BOAT

PROJECT BOAT

$3,500 Negotiable
  • Single Hull
  • 18 ft
  • Other

Pacemaker 180 Trendsetter on good trailer. Rego'd and licenced. 85 CV Yamaha. 300 hrs. Has been run regularly. Starter motor just started playing up. Floor removed and rotted top part of stringers reved. Ready for rebuild. Transom solid. Near new carpet. Radios. Combo unit. Anchor etc.

Wanneroo AreaYanchep

24/01/2019

WANTED: 16ft PROJECT BOAT

$1,000 Negotiable
  • Single Hull
  • 18 ft
  • Classic

Looking for a project boat. Prefer on trailer. Not fussed if unregistered.

Mandurah AreaMandurah

20/01/2019

Ski boat hull (project)

Ski boat hull (project)

$600 Negotiable
  • Single Hull
  • 19 ft
  • Ski Boat

19 food ski boat hull (unsure of make) in good condition almost ready for paint. comes with steering controls and foot throttle and all the stuff for a v drive set up minus the (vdrive gear box and the motor, a couple of seats also. $1000 negotiable Trailer not included

Plantagenet AreaMount Barker

19/01/2019

PROJECT BOAT

PROJECT BOAT

$12,000 Negotiable
  • Other

"LOOKING FOR A PROJECT" Volvo engine Duo stainless steel props Full instrument controls Two new seats Fuel tank under floor

Stirling AreaDianella

17/01/2019

Outboard and Trailer Service

Outboard and Trailer Service

Negotiable
  • Single Hull
  • Custom

Seamac Marine Solutions Outboard / Inboard & Trailer Servicing & Repairs (We can come to You!) Aluminium Plate Boat builder, Refits & Winter Projects, Pumps, Pipework, Electrical, Trailer Boat fitout and more Call Colin now for free, no obligation quote & advise. Mobile & Workshop Services. See below for Outboard service inclusions.... including client / engine familiarisation! All Makes and Models, Petrol and Diesel. Call for new boat pricing. Built Locally at Competitive rates

Rockingham AreaRockingham

15/01/2019

Pacemaker with Hull Extension

Pacemaker with Hull Extension

$2,900 Negotiable
  • Single Hull
  • 18 ft
  • Runabout

A solid worthy project boat, the Pacemaker name is a very reliable hull in the water, this project boat has had a professionally built aluminium pod and full transom plate fitted. This has given the deck space a lot more internal room. New aluminium Bow rails, and polished rocket launchers are also fitted.

Mandurah AreaMandurah

15/01/2019