7 Results: New & Used in bike parts in Bathurst-Orange Region, NSW

• 250 cc

I'm needing a few parts for a 1991 (C1) and a 1993 (C3) model bikes I'm restoring. I don't want to part either and I have no spares so please let me know if you have any of the following: 1 x Fender, rear (35023-1310) - all original with no trimming 2 x Carb floats (16031-1070) 1 x LH or RH handlebar - straight bar only (46003-1351) 1 x LH tank/fairing cover/filler (14090-1068) All Fairings (OEM with least damage as possible) Fairing screws etc. etc...

• 1100 cc
• 0 km

I have a good project bike and now I'm looking for a few spares such as the following: Lock-Assy, Fuel Tank (fuel cap) - PNo: 27016-5068 (or '84/'85 GPz550, '83/'84 GPz1100) Windshield - PNo: 39154-1052 (also '84/'85 GPz750 non-turbo and '84 GPz1100) Pipe-Comp (turbo to muffler, 1 into 2) - PNo: 31064-1055 Muffler Body, Complete, LH - PNo: 18002-1508 (-1510) Muffler Body, Complete, RH - PNo: 18002-1509 (-1511) Handlebar, L/R - PNo: 46003-1135 (also '84/'85 GPz750 non-turbo) Tube, Filter-Pump

• 150 cc

I bought the ECU from a wrecking 2015 Yamaha R15 in an attempt to fix my own R15, but unfortunately the ECU was not the issue. Confirmed working; It came off of a working bike, and works in my 2014 R15.

• 1000 cc
• 0 km

On offer is a complete petrol tank in as new condition with pump, mounting fixtures & a matching air filter cowling. I’ve taped up the petrol cap so it doesn’t close as I don’t have the key. See photo’s for part numbers. I no longer need it as I sold the bike I was going to fit it too. It may fit bikes from 2015 to 2017 as well.

Honda Genuine Near Perfect Condition Used Blinker Flasher Relay Module 1984 XR500 RE Should be a common part to other XR's between 1983 and 1986 Originally a very expensive part. Check your parts number listings for your bike. i would say its probably the same part as fount on these bikes: XR200, XR250, XR350, XR500, XR600 I had a 1985 XR250R. It had exactly the same part on it

Honda Genuine New Old Stock Blinker Flasher Relay Module 1985 XR250 RF Should be a common part to other XR's between 1983 and 1986 Originally a very expensive part. Rare to find new old stock of these. Check your parts number listings for your bike. i would say its probably the same part as fount on these bikes: XR200, XR250, XR350, XR500, XR600 I had two 1984 XR500R, each had exactly the same part on them

motor bike selling parts only many pit bike parts available not in pic also have new seats & plastics pick up mt druitt area

• 125 cc
• 24000 km

G'day. I got 3 bikes for sale, a Daelim, CFMOTO and a Hyosung. Here is a list of details: Daelim - 2005 Roadwin Daelim VJ125 - has 12 months rego (rego expires 1st of March 2025) CFMOTO - 2010 CFMOTO V510 CF250 - rego expired in 2019 - (automatic motorcycle) Hyosung - 2010 Hyosung Aquila GV250 EFI - rego expired November 2023 Have registration papers for all the bikes. The Hyosung and CFMOTO are project bikes, the Hyosung is missing a wiring harness because the previous owner had complete

Basically complete minus front resevoir that can be had for around $20. Two front calipers with front master cylinder, perch and lever (not pictured) one rear caliper with master cylinder and rear reservoir, lines, rear brake switch and ABS unit removed from 2010 S1000RR at around 20,000 km. Check prices elsewhere, the front calipers alone would be cheap at $200 each, front master cylinder $180, rear caliper $100, rear master cylinder and reservoir $100, no idea what the ABS unit is worth but w

Brand new made in India garbage: finish is crap but ok for not a show bike, one hole for speedo odometer winder is split part way though from the factory but if used on the tacho it just needs filling: the other is the opposite, it's not round or large enough (see photos) so no prize for figuring out what to do... no idea why these are sold as pairs. These were used on a lot of models including the X75 Hurricane. Postage $18.