toolsBrisbane RegionClear all
Most recent
40MM (1.5") TYPE 'A' ALUMINIUM CAMLOCK FITTING

40MM (1.5") TYPE 'A' ALUMINIUM CAMLOCK FITTING

$4

40mm (1.5 inch) Type 'A' Aluminium Camlock Fitting. Male camlock on one end, female 40mm (1.5") BSP thread the other end. Quickly and easily connect hoses to tanks, pipes, other hoses etc without tools. The male camlock end fits into any female camlock fitting of the same size, as does the female camlock end fit over any male fitting the same size. We carry Type A, B, C, D, E, F, DC & DP camlock fittings in sizes 40mm, 50mm, 75mm & 100mm, we also stock suction and discharge hose as

Redland AreaThornlands

19/04/2018

Brand new work tool belt

Brand new work tool belt

$25

Brand new

Brisbane South WestAlgester

19/04/2018

Vintage Tools -Axes and Hatchets

Vintage Tools -Axes and Hatchets

Negotiable

Vintage Tools - Axes and Hatchets prices listed for each photo Photo 1 Prices are for axes left to right in photo please note only two have brand markings 1st axe $30 2nd axe $40 branded USA 3rd axe $40 4th axe $ 60 5th axe branded Plumb USA $80 Photo 2 3x Hatchets Small $30 Medium $40 large $50 Photo 3 Rare doubled headed axe $110 1st Splitter combo axe $40 2nd Splitter combo axe $35 Splitter $35 Splitter $10 Other Vintage tools for sale. Please see photos. Pick up only from Jimboomba. If i

Logan AreaJimboomba

18/04/2018

Generator

Generator

$690

As new genelite 3.3 KVA petrol generator. Has Honda motor. Brought new from trade tools and hardly used. Runs perfectly.

Logan AreaWaterford West

18/04/2018

dingo loader safety brace

dingo loader safety brace

$28

No Emails please. If you have questions, first click "more" and read the whole add. After that telephone us at Darko Equipment between 6.30 to 4.30 weekdays or 8 to 11.30am Saturday --------------------------------------------------- Like to work on your own dingo loader? Surplus to requirements is one Hydraulic ram brace - insert around the rod of one lift cylinder when the arms are fully up so they cannot drop down and hurt you $28 We also have NEW aftermarket crowd rams and va

Brisbane South EastCapalaba

18/04/2018

BRAND NEW 40MM (1.5") TYPE 'D' ALUMINIUM CAMLOCK FITTING

BRAND NEW 40MM (1.5") TYPE 'D' ALUMINIUM CAMLOCK FITTING

$10

Female camlock on one end, female 40mm (1.5") female BSP thread the other end. Quickly and easily connect hoses to tanks, pipes, other hoses etc without tools. The male camlock end fits into any female camlock fitting of the same size, as does the female camlock end fit over any male fitting the same size. We also carry Type A, B, C, D, E, F, DC & DP camlock fittings in sizes 40mm, 50mm, 75mm & 100mm as well, please call for more details. We are based in Thornlands 20 mins sou

Redland AreaThornlands

18/04/2018

Polivac Predator MKII w Mytee Carpet Cleaning Equipment Machines

Polivac Predator MKII w Mytee Carpet Cleaning Equipment Machines

$7,788

Polivac Predator MKII with Mytee Continuous Flow Heater Portable Carpet & Upholstery Steam Cleaning Machine Equipment Carpet Extractor Business Start-Up Package for sale ***Key Specifications -Pump Pressure – 500PSI Adjustable Pump Pressure -Vacuum Motors – 2 x 1100w 3-stage vacuum motors -Solution Tank – 50L -Waste Tank – 50L -Warranty – Ten years on the fibreglass body, one year on the machine, -3 months on accessories (hoses, wands, etc). -Machine Weight – 70kg -Machine Dimensions

Brisbane North WestBrisbane City

17/04/2018

Steel Work Bench with Hydraulic Lifting Crane

Steel Work Bench with Hydraulic Lifting Crane

$600

USED - Steel Work Bench with Hydraulic Lifting Crane (hand Pump type) Bench Top is 1800mm L x 1200mm W x 825mm H Full welded RHS 75x50mm Thick Wall Frame with Steel Top 5mm Very Solid Table Fitted with: Castor Wheels Tool Box Drawer Type Folding Hydraulic Lifting Crane (hand Pump type) The top has light surface rust - easy to clean off (Any Tools not included) Can load onto 1 Tonner Single Cabe Ute, Open Bed Body Truck or Trailer

Brisbane South EastMurarrie

17/04/2018

Concrete Grinder

Concrete Grinder

$2,000

PG 280 with a couple of hundered hours on the LED readout very good condtion. This was purchaced from Husqvarna directly and so it has a bigger motor than ones purchaced from places like Tradetools Direct Used carefully and in perfect working order some diamond tooling available at a resonable price if interested. Also available a very good dust collector vacuume Blastrac BDC-1216 $1200 cyclone dust collector $300 6 KVA generator Kohler 12 HP petrol motor very few hours (

Brisbane North EastBridgeman Downs

17/04/2018

Toyo Seiki Tool Setter / Tool Presetter BT50

Toyo Seiki Tool Setter / Tool Presetter BT50

$1,500

USED - TOYO SEIKI BT50 Tool Setter/ Tool Presetter Type TPT-300CJI Scales: 400mm Vertical 300mm Horizontal (dia) for setting tool height and diameter Made in Japan Excellent condition

Brisbane South EastMurarrie

17/04/2018

BRAND NEW 40MM (1.5") TYPE 'F' ALUMINIUM CAMLOCK FITTING

BRAND NEW 40MM (1.5") TYPE 'F' ALUMINIUM CAMLOCK FITTING

$6

40mm (1.5") Type 'F' Aluminium Camlock Fitting. Male camlock on one end, male 40mm (1.5") BSP thread the other end. With these affordable camlocks, quickly and easily connect hoses to tanks, pipes, other hoses etc without tools. These fittings are made from aluminium meaning they are lightweight and provide a good degree of corrosion resistance over a long period of time. We also carry Type A, B, C, D, E, F, DC & DP camlock fittings in sizes 40mm, 50mm, 75mm & 100mm as well, please

Redland AreaThornlands

17/04/2018

5-Drawer Fixed Cabinet Red/Black or Grey/Black

5-Drawer Fixed Cabinet Red/Black or Grey/Black

$245

5-Drawer cabinet for your tools. Makes up a component in the garage module system. ***PLEASE NOTE THAT THIS SYSTEM DO NOT COME WITH TOP BENCH*** LINK FOR THIS PRODUCT: http://garage-workbench.com.au/modular-systems/42-5-drawer-cabinet.html?search_query=5-Drawer tool trolley&results=41 Heavy duty metal. Rubber linings in each drawer. Aluminium handles. Stainless Steel top not included. Black - Grey DIY combination Work Bench & Tool Storage Modular System.

Brisbane North WestBrisbane City

16/04/2018

NEW steel toe safety gumboots

NEW steel toe safety gumboots

$20

No Emails please. If you have questions, first click "more" and read the rest of the add. After that telephone us at Darko Equipment between 7.30 and 4.30 weekdays or 8 to 11.30am Saturday-------------------------------------------------------------- Concreting or trying to repair heavy machinery in muddy conditions? Improve your comfort and mood with a pair of quality Steel toe safety gumboots. We have three brand new pair of BATA boots surplus to requirements. Mens size 9 green c

Brisbane South EastCapalaba

16/04/2018

Hilti DX531 CT Power Actuated Fixing Tool.

Hilti DX531 CT Power Actuated Fixing Tool.

$399

Hilti Power activated Nail Gun in good used condition. Pictures are of the actual item. Please Note. If its still showing as for sale then its still available.. Collection from Balmoral East Brisbane. Kevin .

Brisbane South EastBalmoral

16/04/2018

MOORE & WRIGHT COMBINATION SET / SQUARE METRIC - NEW + WARRANTY

MOORE & WRIGHT COMBINATION SET / SQUARE METRIC - NEW + WARRANTY

$250

BRAND NEW + WARRANTY MOORE & WRIGHT MADE IN ENGLAND COMBINATION SET / SQUARE METRIC MW-CSM300 Traditional Precision Combination Set - Metric 0-300mm Fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life Fully hardened and ground datum faces to resist wear Protractor has full 360 degree scale plate, graduated 0-180 degrees Satin chrome scale plate on protractor Unique rule clamp allows positive location and clamping

Redcliffe AreaRedcliffe

15/04/2018

Welding rods / sticks , 3.2mm 16TC low hydrogen brand WAI

Welding rods / sticks , 3.2mm 16TC low hydrogen brand WAI

$35

Welding rods /sticks 3,2mm 16TC low hydrogen brand WAI Austark , 5kg unopen stored in a tool box in dry container last 3 years ,work fine I still use them. i have more than i need . PH or SMS Rob..

Brisbane North WestFerny Hills

15/04/2018

!!! MOORE & WRIGHT PRECISION VERNIER CALIPER - NEW + WARRANTY !!!

!!! MOORE & WRIGHT PRECISION VERNIER CALIPER - NEW + WARRANTY !!!

$175

BRAND NEW + WARRANTY MOORE & WRIGHT MADE IN ENGLAND PRECISION VERNIER CALIPER 300mm MW-110-30 Precision Vernier Caliper 0-300mm Range 0-300mm / 0-12" Resolution 0.05mm / 1/128" Length of Jaws 55mm Standard DIN862 4 way measurement Mono-block solid slider model Chromed scale with laser engraved graduations The scale shows both mm and inch value Measuring surface in micro lapped Supplied with hard case SHIPPING AUSTRALIA WIDE $10 PAYPAL ACCEPTED +2.6% PLEASE VIEW MY OTHER ADS FOR G

Redcliffe AreaRedcliffe

15/04/2018

Vintage Tap & Die Screw Plate Set OK brand & Little Giant Dies

Vintage Tap & Die Screw Plate Set OK brand & Little Giant Dies

$150

Vintage GTD Corp Tap and Die Screw Plate set OK brand with Little Giant Dies Set No 3311 Made in USA when the metal was good and lasted This is a large set in a Wooden Box 810mm x (L) x 210mm (W) x 50mm (D) Contains 2 x Tap wrenches, 1x Bit Brace Die Holder, Adjustable Guide Stocks, Taps & Dies Contains 16 x cutting sizes Whitwort and N.F. Includes: Separate wooden box with 9 x Threading Tap set cutting tools (see photos) Good Used Set

Redcliffe AreaScarborough

14/04/2018

mini loader gp bucket

mini loader gp bucket

$290

No Emails please. If you have questions first click "more" and read the add all the way to the end. After that you can telephone Darko Equipment on 3245_1185 from 7.30 to 4.30 weekdays or 8 to 11.30am Saturday------------------------------------------ Surplus to requirements is one small general purpose bucket fitted with a universal hitch same as standard dingo, kanga, boxer, toro and vermeer This bucket is 1m wide, has low sides and is made from heavy steel. It would be ideal f

Brisbane South EastCapalaba

14/04/2018

Tool set for sell

Tool set for sell

$10

Tool set for sell. Bought from Kmart. Pick up by cash. SMS first.

Brisbane South WestCalamvale

14/04/2018

Vertical Milling / Boring Machine for sale

Vertical Milling / Boring Machine for sale

$10,000

USED Vertical Milling/ Boring Machine for sale OPEN TO REASONABLE OFFERS This machine is excellent condition. Very high-quality precision machine, Made in Italy SONY Digital Read out on X and Y axis Motorized Vertical Spindle Head - Raise or Lower High Precision Quill Feed with depth gauge Powered X axis Feed and Rapid Y axis Not Powered due to high precision positioning Original tooling holders 3 Phase 415V Machine Some manuals Machine Specification (information from

Brisbane South EastMurarrie

13/04/2018

Twin E Size Cylinder Trolley

Twin E Size Cylinder Trolley

$117

BOC Twin E Size Cylinder Trolley Twin E size cylinder trolley that allows easy movement of a complete welding or cutting plant and permanent set-up of regulators, hoses and blowpipes. Includes standard 100 x 75 mm tool tray with hose hooks. Suitable only for BOC cylinder. CASH ON PICKUP ONLY For more details Contact Metro Welder Services: Ph: *****6000 Email: Address: 7/42 Trade St, Lytton QLD 4178 Open From: 7:30 - 4 Monday - Friday

Brisbane South EastLytton

12/04/2018

ALUMINIUM CAMLOCK FITTING - 40MM (1.5") TYPE 'E' -  BRAND NEW

ALUMINIUM CAMLOCK FITTING - 40MM (1.5") TYPE 'E' - BRAND NEW

$6

Male camlock on one end, male 40mm (1.5") tail the other end. Quickly and easily connect hoses to tanks, pipes, other hoses etc without tools. The male camlock end fits into any female camlock fitting of the same size, as does the female camlock end fit over any male fitting the same size. We also carry Type A, B, C, D, E, F, DC & DP camlock fittings in sizes 40mm, 50mm, 75mm & 100mm as well, please call for more details. We are based in Thornlands 20 mins south of Brisbane.

Redland AreaThornlands

12/04/2018

5-Drawer Fixed Cabinet Red/Black or Grey/Black

5-Drawer Fixed Cabinet Red/Black or Grey/Black

$245

5-Drawer cabinet for your tools. Makes up a component in the garage module system. ***PLEASE NOTE THAT THIS SYSTEM DO NOT COME WITH TOP BENCH*** LINK FOR THIS PRODUCT: http://garage-workbench.com.au/modular-systems/42-5-drawer-cabinet.html?search_query=5-Drawer tool trolley&results=41 Heavy duty metal. Rubber linings in each drawer. Aluminium handles. Stainless Steel top not included. Black - Grey DIY combination Work Bench & Tool Storage Modular System.

Brisbane North WestBrisbane City

11/04/2018