ADVERTISEMENT
Sort

Filter & Refine

View Layout
ScaniaClear all

2019 Scania R620 Tipper and 2020 Gorksi PBS 3axle Trailer

  • 620 hp
  • 440000 km
  • 6x4

I’m selling my Beast 2019 Scania R620 with only 440,000kms which is still under R&M at Scania which ends in about May this year which comes with a 2020 Gorski PBS 3axle trailer which is on saf axles disk brakes . . The truck has left hand alarm beacon cameras scales body up alarm the works . Both truck and trailer has delta hoist.. razor tarps.. lights on tailgate and dolly on trailer and has always been serviced on time .. NOTE the photos attached are of when truck was new and didn’t upload

$360,000Negotiable
Campbellfield, VIC

Tipper
29/04/2024

1987 Scania Tipper 112 Day Cab $35,000

  • 320 hp
  • 840000 km
  • 6x4

11 Metre Tipper Nov 2022 – In Body Motor Re-build $17,000.00 has done under 10,000km since rebuild. 2 brand new batteries 10 Speed Manual Transmission Camilleri Dust Tarp – Manual Diesel – 320 HP Engine Size 12 Litre Ring Feeder Truck Registration expires 1st July 2024 Very good workhorse with regular servicing. Tyres 85% Air Operated Tailgate No RWC Selling up due to retiring.

$35,000Negotiable
Reservoir, VIC

Tipper
29/04/2024

Scania 8X4 crane truck

  • 363838 km
  • 8x4

1989 Scania 113H 8X4.Crane truck. 363,000 ks. Has 6.8 meter tray. Atlas 180.1 crane. Has 12.2 meter reach lifts 1.23 ton at 12.2 meters. Lifts 7.1 ton in close Truck in good condition neat tidy. Goes well. $65,000 plus gst.

$65,000
Cuprona, TAS

Dealer used Crane Truck
29/04/2024

SCANIA - R620

  • 378382 km

Scania R620 2020 Model 6x4 Prime Mover 130T Rated Hydraulics Bull Bar 90mm Ball Race Genuine Low km's Price Excluding GST: $265,000 GST amount: $26,500 Total Price (inc GST): $291,500 This asset is privately owned

$265,000
Wonthella, WA

Dealer used Prime Mover
29/04/2024

Scania R580 tipper

  • 580 hp
  • 900000 km

Scania 2007 model R580 tippper b-double spec two pedal auto alloy body with rock sheets good tyres no oil leaks maintained and serviced on time rebuild bottom end the truck drives like new clean truck ready for work won’t need much for road worthy I have all other receipts for all services and repairs 2017 Gorsky super dog bisalloy trailer disk brake suspension two way gate electric tarp and canopy durobright alloy rims clean skin tyres in good condition never done rock with trailer selling wit

$220,000
South Morang, VIC

Tipper
29/04/2024

Scania p420 2005 model

  • 420 hp
  • 946000 km
  • 25900 kg(GVM)

Scania p420 2005 model, km shown in picture Recently rebuilt motor at 935,000km Reconditioned diff (new bearings) All new air bags New powerdown shock obsorbers Near new Pirelli steer tyres Drive tyres still at 60% tread New guards and reflective signs New heated mirrors New air hoses Bluetooth hands free installed Air conditioning has had new gas installed This model has engine retarder and engine break. We had planned to keep this truck for years to come which is why we have done all the rec

$64,900Negotiable
Deloraine, TAS

Prime Mover
29/04/2024

SCANIA G440 TIPPER TRUCK

  • 830000 km

Hi up for sale is my Scania g440 sleeper cab runs and drives perfect has everything needed for government projects lots of money spent on this truck diff and motor rebuilt by scania in Laverton and much more call to discuss

$115,000Negotiable
Point Cook, VIC

Tipper
28/04/2024

Scania truck 112

  • 360 hp
  • 20000 km
  • 6x4

Scania 112 long chassis truck This truck has had a lot of money spent on fully rebuilt engine and gearbox has new drive tyres Has got some damage to the left hand front but have the parts to go with it phone calls only thanks

$6,500Negotiable
Launceston, TAS

Flat Deck
27/04/2024

2018 Scania R580

  • 838266 km

2020 R580 SANIA PRIME MOVER 580 HP SCANIA V8 14 SPEED OVERDRIVE AUOTMATED MANUAL TRANSMISSION 3 x 29 PARABOLIC FRONT SPRINGS AIRBAG SUSPENSION 3 1/2 INCH TURNTABLE AIR CONDITIONED ADJUSTABLE STEERING FOR FURTHER INFORMATION CALL: BRENDAN WILLIAMS ANDREW FARANO

$152,500
Hazelmere, WA

Dealer used
26/04/2024

2020 Scania R580

  • 454627 km

2020 R580 SANIA PRIME MOVER 580 HP SCANIA V8 14 SPEED OVERDRIVE AUOTMATED MANUAL TRANSMISSION 3 x 29 PARABOLIC FRONT SPRINGS AIRBAG SUSPENSION 3 1/2 INCH TURNTABLE AIR CONDITIONED ADJUSTABLE STEERING FOR FURTHER INFORMATIO CALL: BRENDAN WILLIAMS ANDREW FARANO

$227,500
Hazelmere, WA

Dealer used
26/04/2024

2005 scania prime mover v8 580hp

  • 580 hp
  • 1011111 km

For sale or swap is my scania had plans for it but they have failed so I'm moving it on cheap Needs a little bit of a tidy up In a few places Needs a new exhaust tip Needs lh seat belt Steering wheel is worn And the back of cab Needs tidy up ,has about 1mil kms on it . A/c works Engine Runs sweet Gearbox & clutch is nice Tyres Good Everything else seems good No rego , selling as is or will swap for a tipper truck or a boat Located Cooranbong 35,000

$35,000
Newcastle Region, NSW

Prime Mover
26/04/2024

2013 Scania P320 6X2 Auto tray truck For sale@120K

  • 320 hp
  • 372500 km
  • 6x2

Regretful sale : 2013 Scania P320 6X2 (AUTO )tray truck with 9m tray GVM-26.5T GCM-45T TARE-11T Odometer-372500km Can carry 14T or 14 pallets easily 6 new tyres and 4 almost 50% tread COI is due in August/2024 New clutch assembly from Scania in early 2023 Fully functional No leaks Regularly serviced Air suspension Reverse camera Aluminium alloy Bull bar New batteries 2 under body tool boxes RingFeeder tow bar with all electrical and pneumatic system for towing trailers Euro5 but no add blue Hyd

$120,000
Algester, QLD

Tray
26/04/2024

For sale 2013 Scania P440 Auto low kms

  • 440 hp
  • 689000 km
  • 6x2

For sale 2013 scania P440 with auto transmission.one owner since new. retractable turn table.all tyres around 80% brand new batteries. inbuilt fridge.long range duel fuel tanks..upto date services..low kms for its age..for more details plz contact..thanks

$90,000Negotiable
Geelong, VIC

Prime Mover
25/04/2024

2007 Scania R580, 90t rated

  • 580 hp
  • 997000 km
  • 6x4

2007 Scania R580 manual, NO ADBLUE, 90t rated, 90/50mm turntable, full service history, end tipper hydraulics with fast down, Ecowind bunk aircon, super singles 90%, drive tyres 50%, upgraded head unit. Lots of work done on the truck: -new clutch in January -bottom end bearings -new radiator, header tank and engine fan -new turbo and exhaust manifolds -new retarder -brake rotors, brake boosters, wheel bearings all around -new ac condenser and compressor -air compressor and APS unit -all inject

$85,000
Wangara, WA

Prime Mover
25/04/2024

6 car carrier with national carrier

  • 560 hp
  • 1200000 km
  • 4x2

ANNUAL INCOME 320 k$, POTENTIAL 400 k$ with double shifts.A truck with a 6 cars trailer(the trailer belongs to the company) and position with national carrier. Great earnings. Work 5-6 days a week, the possibility of working double shifts and the involvenment of hired driver. Full training will be provided. Truck has full rebuilt engine with the warranty until 12/24.

Negotiable
Minto, NSW

Car Transporters
25/04/2024

1996 Scania tipped truck

  • 60 km

Hi up for sale is a very well kept well maintained Scania tipper . One driver on this for 9 years . It’s inducted to all major jobs and all major plant hires .

$111,111,111Negotiable
Narre Warren, VIC

25/04/2024

1997 scania 124G series 4

  • 400 hp
  • 437000 km
  • 6x4

Hey all, For sale Scania . Legend tipper truck . Low klms at only 437k . New tyres . New front window . Synchromesh gearbox . New door handles . Good honest working truck Reason for selling is I want a flat bed or beaver tail to move my gear around.

$38,000Negotiable
South Nowra, NSW

Tipper
21/04/2024

SCANIA TIPPER TRUCK

  • 580 hp
  • 1340000 km
  • 6x4

SCANIA R580 TIPPER. 2007 MODEL SLEEPER CAB. HAMELEX BODY 4.2 length 1.35 deep GOOD STRONG ENGINE AND GEARBOX. 12 SPEED THREE PEDAL AUTO. NEW TYRES ALL AROUND. RINGFEDER. EVERYTHING WORKING AS IT SHOULD. WELL LOOKED AFTER TRUCK. ALWAYS SERVICED. NO LEAKS , NO PROBLEMS. A GOOD HONEST WORKHORSE. 1340000kms. GENUINE REASON FOR SALE. RETIRING. REGISTERED AND READY FOR WORK. START MAKING MONEY. NO RWC. PRICED RIGHT TO SELL TO GENUINE BUYER. CONTACT RICK FOR INSPECTION

$89,000
Hillside, VIC

Tipper
16/04/2024

Scania 124 6x4 Prime Mover for sale

  • 882580 km
  • 6x4

Scania for sale $33,000 ($30k GST) Bought for a job 6 months ago and no longer required, has had the following works done since we have owned. New Hydraulic tip valve, diverter valve and air lines plumbed up for single side tipper New rear bar and tail lights fitted New steering drag link Air con repaired New led headlights and spotlights fitted and wired up Beacon fitted Air tank drains New cab bushes and cab shocks fitted New air suzy coils and tail light cable Cons Speedo not working for

$33,000
Albany, WA

Prime Mover
16/04/2024

Scania For sale

  • 100000 km

Selling my fleet all are in A1 condition mechanical done by European truck repairs and Scania I have G440 × 4 all have KM between 500km to 900km all have there prices. P440 ×2 one with 900km one with 800km G480 with 690km 560× 2 one with 800km and 1.1M 620 with 600km…

$100,000Negotiable
Lalor, VIC

Prime Mover
15/04/2024

2015 Scania G480

  • 480 hp
  • 678000 km
  • 261 kg(GVM)

Scania G480 6cyl, 14 speed opticruise (auto) with the infamous retarder. Jost ballrace turntable. Gvm 26.1 Gcm 70 Check out this incredible truck! With a modest 678,000km on the odometer and a meticulous service history, it's a steal! I've rebuilt the retarder and given it a major service, including the diffs, gearbox, and coolant along with the regular servicing. . The tyres are in good condition, and it's registered until August. Originally from TasPetroleum, this semi has been pampered and

$99,000Negotiable
Westbury, TAS

Prime Mover
13/04/2024

Scania 14 pallets tautliner

  • 320 hp
  • 938000 km
  • 25000 kg(GVM)

2011 Scania 14 pallets/payload 12 tons, GVM 25 tons taut-liner truck for sales, automatic transmission, has replaced 6 ew tyres , 4 new battery, with 2 tons tailgate $88000 plus GST

$88,000Negotiable
Rocklea, QLD

Curtainsider
12/04/2024

2018 Scania prime mover

  • 150000 km

Reluctant sale. Truck no longer required 2 way PTO 150km Clean truck Dream to drive

$175,000
Campbellfield, VIC

Prime Mover
10/04/2024

Scania Bus L113

  • 1200000 km

1998 Scania L133 Automatic currently has five months of New south Wales registration and has 1.2 million kilometers. Finance can be arranged if need. The Bus has a full bodywork done to it including new sides and a proper paint job, there is no rust on the bus. It’s got airbags in the front and rear of the bus,New Toyo tyres, new battery,new suspension and recently got a full gasket kit done to it including head gasket and also has a reconditioned diff.

$15,000
Minto, NSW

Other
03/04/2024