1392 views
Haines Hunter V20CC fully rebuilt
$1,234.56 Negotiable
Originally a Haines Hunter V19R
Made from the Bertram V19 mold.
Boat is now a V20CC (centre cab)
Measuring 6.1m overall length (including extension) and 2.2m wide
Hull, motor and a full tank of fuel puts the boat at 1400kg. Trailer weighs 400kg
Fully rebuilt by professional Shipwright.
Below water line is black gelcoat, inside is flowcoated, floor has non skid, hull sides and deck are white 2k.
Boat only needs fit out to your specs. I can do this for you at a cost if you want.
A 2006 150hp Evinrude approx 1600hrs, runs well, recently serviced. Pushes boat along at 40 knots. motor doesn't come with boat. it's on for water testing only
Boat has a 2 ft long 3/4 width hull extension with a 25" transom.
Cab details :
Custom center cab from a mold using light weight composites.
Dash can accommodate 2 x 12" Simrads.
Cab is big enough to sleep a 6' 6" person comfortably.
Cab bilge is 2m long x 0.6m wide. Max internal cab height is 1.5m
Cab length 1.8m
Cab width at widest point is 1.1m
Ample storage in cabin.
Rear storage for batteries, fuel filters, deck wash etc.
Side pockets
Casting platform
Reinforced foredeck for Minn kota or drum winch.
100mm conduit below floor for cables
Fuel capacity is 200L in a brand new below floor stainless steel tank.
~ 75L Kill bin.
~ 60L bilge.
~ 65L live bait tank.
Trailer is a 2006 Telwater September rego 2 ton dual axle, new bearings and brakes.
Heaps of build photos available upon request.
Made from the Bertram V19 mold.
Boat is now a V20CC (centre cab)
Measuring 6.1m overall length (including extension) and 2.2m wide
Hull, motor and a full tank of fuel puts the boat at 1400kg. Trailer weighs 400kg
Fully rebuilt by professional Shipwright.
Below water line is black gelcoat, inside is flowcoated, floor has non skid, hull sides and deck are white 2k.
Boat only needs fit out to your specs. I can do this for you at a cost if you want.
A 2006 150hp Evinrude approx 1600hrs, runs well, recently serviced. Pushes boat along at 40 knots. motor doesn't come with boat. it's on for water testing only
Boat has a 2 ft long 3/4 width hull extension with a 25" transom.
Cab details :
Custom center cab from a mold using light weight composites.
Dash can accommodate 2 x 12" Simrads.
Cab is big enough to sleep a 6' 6" person comfortably.
Cab bilge is 2m long x 0.6m wide. Max internal cab height is 1.5m
Cab length 1.8m
Cab width at widest point is 1.1m
Ample storage in cabin.
Rear storage for batteries, fuel filters, deck wash etc.
Side pockets
Casting platform
Reinforced foredeck for Minn kota or drum winch.
100mm conduit below floor for cables
Fuel capacity is 200L in a brand new below floor stainless steel tank.
~ 75L Kill bin.
~ 60L bilge.
~ 65L live bait tank.
Trailer is a 2006 Telwater September rego 2 ton dual axle, new bearings and brakes.
Heaps of build photos available upon request.
- Date Listed:25/11/2023
- Last Edited:21/04/2024
- Hull Year:2023
- Listing Type:Private seller
- Make:Haines Hunter
- Length (ft):20
- Hull Type:Single Hull
Similar Ads
- CLARK 5.2 LEGEND SIDE CONSOLE - Deposit Taken
- Single Hull
- 17 ft
CLARK 5.2 LEGEND SIDE CONSOLE Powered by a F115 Yamaha with 19 hours use sitting on Australian made Oceanic braked trailer. The boat presents as new and been housed in a dust and sunlight proof garage since new. Options include:- 4mm hull bottom and 3mm sides Cutting board station with draw and rod holders Fully plumbed live bait and kill tanks 80lb 24V X5 MotorGuide with spotlock with one hour use with spare prop 2 x 110 Amp hour deep cycle underfloor batteries ProMarine Triple Bank on board$48,000Marks Point, NSW•16w - Quintrex 11ft tinny
- Single Hull
- 11 ft
Up for sale is my Quintrex 11ft tinny and trailer both registered for 12 months. Trailer has been fully rebuilt new axles,hubs,springs-and bearings,no rust in trailer. Great reliable boat only selling due to upgrade Call Stephen on $2500 ono$2,500NegotiableBolton Point, NSW•2w - Haines 530 Bowrider
- Single Hull
- 18 ft
2009 Haines 530 Bowrider Great all round boat easily pulls wake boarders out of water. Great for fishing also. Mercury Optimax 135hp outboard with 309 hours Dunbier trailer Bimini Ski pole Wakeboard tower Live bait tank Lowrance fish finder and gps Fusion Bluetooth stereo amplifier and 4 tower speakers Electric winch Travel covers Regularly serviced Will come with 12 months Rego on boat and trailer Selling as looking to upgrade. Happy to put in water for serious buyers.$38,000NegotiableWyee, NSW•1w - Haines signature 492f
- Single Hull
- 16 ft
Haines signature 492f 90hp honda 4 stroke 300hrs 1yr old felk trailer Epirb All Inshore safety gear Garmin sounder/plotter Gme marine radio Bimni cover Bilge pump All night lights work Great boat$22,000NegotiableValentine, NSW•5w - Cruisecraft rapid boat
- Single Hull
- Cruise Craft
Cruisecraft rapid runabout, 115 hp mercury outboard ,new impeller ,the motor has been serviced and the trailer has had a overhaul ,comes with marine radio and general safety gear and runs well ,boat and trailer is fully registered it has been our family runabout for the last 20 years and it will be sad to see it go.Sorry no swaps.$5,500NegotiableDora Creek, NSW•6w - 1986 Cruise Craft Executive 800 - low engine hours
- Single Hull
- 26 ft
FOR SALE - $43,900 or nearest offer (no ridiculous offers or swaps thanks). Australian made (Nichols Brothers) CRUISE CRAFT EXECUTIVE 800 8 METRES (26 feet) IN LENGTH Plus Duckboard FULL LENGTH FLYBRIDGE VERSION 1986 Upper & lower covers Bimini frame 3 seater padded bench that can be faced forwards or backwards (on upper deck). Recent costly and difficult work completed to replace large toilet sea cock under floor (this has resolved a common issue) DUAL CONTROLS (LOWER & UPPER DECK) POWER$43,900NegotiableSwansea, NSW•17w - Bertram V19
- Single Hull
- 19 ft
Selling my Bertram V19 project boat. All work has been done by a fully licensed shipwright. -new transom and stringers and floors replaced. - new alloy pod - will throw in all the ply, glass and resin for the project - trailer in as new condition Justin -NegotiableBelmont South, NSW•3w - Bluefin 360 Rascal
- Single Hull
- Dealer new
Bluefin Aluminium Heavy Duty Dinghies are packed with standard features and with a number of sizes in the range. Easily driven and very stable at rest the Heavy Duty Dinghies range covers car toppers and trailerable boats and are the most solidly constructed fully welded dinghies available. With a large selection of standard features there is more included in a Bluefin Heavy Duty Dinghy. There is a great range of options so that you can build your perfect aluminium boat suited to your boati$3,299Morisset, NSW•2w - Quintrex 630 Legend centre console Boat. Fishing
- Single Hull
- 21 ft
For sale 2008 Quintrex 630 Legend centre console, 150hp 4 stroke Yamaha, Telwater dual axle trailer This is a great outside fishing vessel with high gunnels (upper thigh height) and a verry dry ride. Boat has been fully rewired with spare cables at bow and stern for additional use. Motor has approx. 740 hours and has never missed a beat. Motor is serviced yearly Trailer has had new springs installed few years back, has brakes and bearings done yearly, has three stage winch and all new rollers R$55,000Redhead, NSW•15h - BLUEFIN BARRACUDA 540 SIDE CONSOLE SPORTSFISHER 5.6M
- Single Hull
- 18 ft
As it name suggests the Barracuda is powerful and sleek. Built tough to easily access offshore fishing the Barracuda is stylish and practical. Fitted with two upholstered pedestal seats with four mounting brackets including one on the raised casting deck make it a versatile platform. With a screened side console and plenty of room to attach electronics the cockpit is quite spacious. With an underfloor fuel tank the Barracuda has great range for your days boating. FEATURES 3mm plate sides and$48,000Sunshine, NSW•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here