185 views
WILWOOD 4 WHEEL DISC BRAKE KIT FOR FORDS
$3,276
Wilwood Classic Series Dynalite Brake Kit
Front Brake Kit Part No.: 140-13477-DR
Rear Brake Kit Part No: 140-11403-DR
Suits 1970 - 1973 Ford Mustang and other Fords
Front Classic Series Dynalite Brake kit includes:
Right Rotor No: 160-14325-BK Drilled & Slotted 0.94" Thick x 11.29" O.D.
Left Rotor No: 160-14326-BK Drilled & Slotted 0.94" Thick x 11.29" O.D.
Superlite 4 Piston Red Powder Coat Calipers
Caliper Mounting Brackets
BP-10 Smart Compound Brake Pads
Brake Hats
Brake Hubs
Bearings, Seals, Dust Caps
Brake Line Fittings
All hardware
Rear Forged Dynapro Low-Profile Rear Brake Kit includes:
0.81" Thick x 11.00" O.D. Drilled & Slotted Rotors
Dynalite 4 Piston Red Powder Coat Calipers
Caliper Mounting Brackets
Drum Parking Brake Assemblies
BP-10 Smart Compound Brake Pads
All hardware
Notes:
• Can package and coordinate with your arranged shipping service
• Front and Rear Kits are available for your inspection.
• This kit has front wheel bearings to suit large spindle******1973 Mustangs, Fairlane and Falcons with Drum or Disc Brake Spindles. A change of front wheel bearings is required for******1969 Mustangs, Mercury Cyclones and other Fords.
• Classic Series FDL-M kits can be used with either manual or power boost master cylinders.
• Front rotors are machined finish and rear rotors have a black coating. That’s the only way that Wilwood was selling Drilled & Slotted rear rotors. The black coating can be machined off or Wilwood assured me that a few brake application would remove it.
• The rear kit fits Rear Ends with Small Bearing Ford Axle Flanges (3.336" x 2.000" Mounting Pattern) and with a 2.50" Axle Flange offset. Most Ford vehicles have this particular rear end and offset. The Wilwood diagram is to for measurements of your axle flange and offset to be sure your Ford rear end is suitable.
• Wilwood states the kits will clear most 14 inch OEM disc brake wheels but will not fit OEM drum brake wheels. I think a minimum 15 inch wheel is best. The Wilwood diagram for is for wheel clearance.
Front Brake Kit Part No.: 140-13477-DR
Rear Brake Kit Part No: 140-11403-DR
Suits 1970 - 1973 Ford Mustang and other Fords
Front Classic Series Dynalite Brake kit includes:
Right Rotor No: 160-14325-BK Drilled & Slotted 0.94" Thick x 11.29" O.D.
Left Rotor No: 160-14326-BK Drilled & Slotted 0.94" Thick x 11.29" O.D.
Superlite 4 Piston Red Powder Coat Calipers
Caliper Mounting Brackets
BP-10 Smart Compound Brake Pads
Brake Hats
Brake Hubs
Bearings, Seals, Dust Caps
Brake Line Fittings
All hardware
Rear Forged Dynapro Low-Profile Rear Brake Kit includes:
0.81" Thick x 11.00" O.D. Drilled & Slotted Rotors
Dynalite 4 Piston Red Powder Coat Calipers
Caliper Mounting Brackets
Drum Parking Brake Assemblies
BP-10 Smart Compound Brake Pads
All hardware
Notes:
• Can package and coordinate with your arranged shipping service
• Front and Rear Kits are available for your inspection.
• This kit has front wheel bearings to suit large spindle******1973 Mustangs, Fairlane and Falcons with Drum or Disc Brake Spindles. A change of front wheel bearings is required for******1969 Mustangs, Mercury Cyclones and other Fords.
• Classic Series FDL-M kits can be used with either manual or power boost master cylinders.
• Front rotors are machined finish and rear rotors have a black coating. That’s the only way that Wilwood was selling Drilled & Slotted rear rotors. The black coating can be machined off or Wilwood assured me that a few brake application would remove it.
• The rear kit fits Rear Ends with Small Bearing Ford Axle Flanges (3.336" x 2.000" Mounting Pattern) and with a 2.50" Axle Flange offset. Most Ford vehicles have this particular rear end and offset. The Wilwood diagram is to for measurements of your axle flange and offset to be sure your Ford rear end is suitable.
• Wilwood states the kits will clear most 14 inch OEM disc brake wheels but will not fit OEM drum brake wheels. I think a minimum 15 inch wheel is best. The Wilwood diagram for is for wheel clearance.
- Date Listed:10/02/2024
- Last Edited:10/02/2024
- Condition:New
- Warranty:No
- Make:Ford
Similar Ads
- Rebuilt Hz statesman caprice rear disc brake proportion valveRebuilt Hz statesman caprice rear disc brake proportion valve.has been sand blasted and honed inside new seals and brake fail sensor. Rebuilt by brake technician Has been tested and in great condition Will come with receipt for rebuild Will post$500Maroochydore, QLD•10h
- Front & Rear set of Commodore VT VX VY VZ Disc Brake RotorsHere we have a Used Condition Standard set of Front and Rear Disc Brake Rotors to suit Commodore VT VU VX VY VZ and Hand brake Shoes. They are for the Set. Measurements are; Front; # 1, 28mm, # 2, 28mm Rear; #3, 15.25mm, # 4, 15.4mm Please refer to the photos as they form part of the description and are of the actual item. Local pick up is in Maroochydore. .$95Maroochydore, QLD•133w
- BOSS AIR BAG LOAD ASSIST KITS SUIT 4X4 UTES, VANS, WAGONS FROM $599 *PRICED FROM: $599.00* / LOAD ASSIST KIT - PICK UP - QLD 4556. DELIVERED MOST CITY METRO AREAS FROM JUST: $609.00* / KIT. NOTE: ALL OUTER REGIONAL & REMOTE AREAS OF ALL STATES FROM: $619.00* / DELIVERED. * Please check with us! GENUINE 'BOSS' AIR SUSPENSION 'LOAD ASSIST AIR BAG KITS' BOSS - Leaders in Air Bag Suspension Technology in Australia. The massive BOSS range is now available for over 100 different vehicle fitments to suit most Australian market applications. NOW FITTED TO OVER 25,000 AU$599Kunda Park, QLD•1w
- DURASHOCK 4X4 NITRO GAS STRUTS and SHOCKS - SET 4DURASHOCK 4X4 NITRO GAS STRUTS & SHOCKS Our Ruggedly built DURASHOCKS are now available to suit most popular 4x4 Vehicles and with a 3 YEAR/60,000K Warranty. Offering excellent value for money as a Heavy Duty Replacement for customers looking to upgrade their shocks, replace worn out O.E.M. Shocks or Replacements for old 1 inch & 2 inch Raised LIFT KIT Shocks currently fitted to your 4x4. These are suitable for for both Standard Height Vehicles and on up to 2 Inch Raised Height on m$619Kunda Park, QLD•1w
- DURASHOCK 4x4 NITRO GAS SHOCKS - SET 4Our Ruggedly built DURASHOCKS are now available to suit most popular 4x4 Vehicles and with a 3 YEAR/60,000K Warranty. Offering excellent value for money as a Heavy Duty Replacement for customers looking to upgrade their shocks, replace worn out O.E.M. Shocks or as 1 inch & 2 inch Raised LIFT KIT Shocks currently fitted to your 4x4. These are suitable for for both Standard Height Vehicles and on up to 2 inch Raised Height on most of the popular 4WDs. PRICED at just $539.00 / SET 4 SHOICKS$539Kunda Park, QLD•1w
- Ssangyong Actyon, Kyron Brake Booster - 4851009000Brand New Genuine Ssangyong Brake Booster Actyon Sports, Kyron 2005 - 2011 Part Number 4851009000$400Nambour, QLD•138w
- Ssangyong Korando LH Brake Cable - 4901005016Brand New Genuine Ssangyong LH Brake Cable to Suit Korando Part Number 4901005016$50Nambour, QLD•139w
- Ssangyong Actyon Sports LH Brake Cable - 4901032202Brand New Genuine Ssangyong LH Brake Cable Suits: Actyon Sports******2012 Part Number 4901032202$50Nambour, QLD•139w
- Ssangyong Rear Brake Pads - 4841321B10Brand New Genuine Rear Brake Pads Part 4841321B10 Suit Rexton - Various Confrim with Vin...$65Nambour, QLD•198w
- Ssangyong MUSSO KORANDO RH Rear Brake Cable (Drum Brakes) - 4902005016Brand New Ssangyong RH Rear Brake Cable (Suits Drum Brakes) MUSSO KORANDO: 1996 - 2005 Part Number 4902005016$60Nambour, QLD•139w
- New 250mm ceiling exhaust fanNew Click 250mm ceiling exhaust fan, Easy installation$15NegotiableBokarina, QLD•9w
- KlevaKlip KSL140N Snap-Loc CliKlevaKlip KSL140N Snap-Loc Clip for TREX Transcend Decking Super-fast fixing system, extremely easy to use. Provides correct gapping between decking boards. $4 Each or $50 for all 16. Ironbark Timbers sell packs of 40 for $244$4NegotiableBokarina, QLD•9w
- Texas Instruments TI-83 Plus Programmable Graphing Scientific CalculatThe Texas Instruments TI-83 Plus graphing calculator is for students, engineers, mathematicians, and science professionals. Find answers to complex mathematical problems quickly. The TI-83 Plus Calculator has a simple and intuitive key layout. Calculations are fast and simple. The graphing interface on the TI-83 Plus Calculator makes the programming language easy to learn. This allows conversion programs into which you can enter information to create graphs. This TI-83 can store and analyze up$75Bokarina, QLD•13w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here