108 views
XR250 Speedo refurbishment
$270
Hi all, due to the unavailability of the mid 80s XR speedos that I had been chasing for one of my builds. I have finally( after many failed attempts) been able to produce a near replica of the original product and am now offering a rebuild service for fellow enthusiasts. Seen in the pics are the versions I can offer, one in km/h OEM style and the other converted from a mph speedo with the XR insigniture taking place of the trip meter or any one of the cc size specific dial faces. These speedos are able to be fully diassembled for maint purposes and fit straight to the OEM mounting bracket utilising the same hardware. How it works.
You need to send me your damaged speedo which has a working internal mechanism either in km or mph. I will disassemble and rehouse your unit. I offer the complete houseing including screen and backing plate, I can also fit a new face plate and needle. I cannot open an OEM houseing without the risk of damage, original OEM houseings will need to be cut apart to retrieve the mechanism, during this stage there is also a risk of the needle being broken if brittle from sun damage. Prices start from $270 Aud which covers the houseing screen( I can cut off and fit original screen if in good condition) and back plate fully assembled and tested $330 Aud includes new dial face and needle as well. Please take into consideration that I work a 2 and 1 roster and can only work on these when home, they are fully cleaned up and assembled by hand and are time consuming to get to a finished product.
Return postage is included in Aus, It will have a protective film fitted to the screen and rubber cover over cable thread. At the moment I have 10 units ready for assembly, with a view to making more if there is demand. Please see pics of completed units. For further information and enquiries please contact me by gumtree message or phone and I will attempt to reply in a timely manner. Thanks Jeff.
You need to send me your damaged speedo which has a working internal mechanism either in km or mph. I will disassemble and rehouse your unit. I offer the complete houseing including screen and backing plate, I can also fit a new face plate and needle. I cannot open an OEM houseing without the risk of damage, original OEM houseings will need to be cut apart to retrieve the mechanism, during this stage there is also a risk of the needle being broken if brittle from sun damage. Prices start from $270 Aud which covers the houseing screen( I can cut off and fit original screen if in good condition) and back plate fully assembled and tested $330 Aud includes new dial face and needle as well. Please take into consideration that I work a 2 and 1 roster and can only work on these when home, they are fully cleaned up and assembled by hand and are time consuming to get to a finished product.
Return postage is included in Aus, It will have a protective film fitted to the screen and rubber cover over cable thread. At the moment I have 10 units ready for assembly, with a view to making more if there is demand. Please see pics of completed units. For further information and enquiries please contact me by gumtree message or phone and I will attempt to reply in a timely manner. Thanks Jeff.
- Date Listed:12/02/2024
- Last Edited:12/02/2024
- Condition:Refurbished
- Listing Type:Private seller
Similar Ads
- TM MX 250F Engine
- 250 cc
2013 low hr MX250F engine in good condition. Can send links to running prior to stripping bike.$2,850Booyal, QLD•4w - Suzuki TS 250 1970s model for parts or restoration.
- 250 cc
- 999999 km
SUZUKI TS 250 1978/9 dismantled by previous owner, need it gone for parts or restoration, $500 firm or i will part it out, based north of Bundaberg,$500Rosedale, QLD•2w - 2013 kyb closed cartridge forks
- 250 cc
48mm Closed Cartridge KYB TM MX250F Forks. Good condition but does have very light stone chipping on uppers. See pics..$775Booyal, QLD•4w - Kawasaki KX 250 Upper Gasket Kit (85/86)Kawasaki KX 250 Upper Gasket Kit (85/86) Brand new$25Howard, QLD•31w
- Vespa/Piaggio MP3 250 Complete CoilVespa/Piaggio MP3 250 Complete Coil Complete H.T Coil: only fits MP3 250******2008 Free Post Australia Wide$99Gympie Area, QLD•227w
- Harley Davidson toolsHarley Davidson engine tools $200 for L/H bearing tool 3298. $250 Cam plate pressure test tool. (Red) $200 99/05 cam tension pads, bearings and tool Evo, twin cam if doing engine rebuild, or cam tensioner. Ask for any info$200Howard, QLD•29w
- Yamaha V-Max PartsYamaha V-Max Mirrors, Grab Handles and Back Rack these come of a 2007 model all for $250$250Gympie, QLD•15w
- XR600/ 350 Digital Tripmeter silicon button covers.
- 600 cc
- 1234 km
Hi, I have produced for sale a limited number of silicon button covers for the 85/6 XR600 and 350 with the digital dash. $65 a set plus postage. Message or txt for more info.$65Branyan, QLD•4w - XR500 Speedo refurbishmentHi all, due to the unavailability of the mid 80s XR speedos that I had been chasing for one of my builds. I have finally( after many failed attempts) been able to produce a near replica of the original product and am now offering a rebuild service for fellow enthusiasts. Seen in the pics are the versions I can offer, one in km/h OEM style and the other converted from a mph speedo with the XR insigniture taking place of the trip meter or any one of the cc size specific dial faces. Other pics are$270Branyan, QLD•13w
- XR350 Speedo refurbishment
- 111 km
Hi all, due to the unavailability of the mid 80s XR speedos that I had been chasing for one of my builds. I have finally( after many failed attempts) been able to produce a near replica of the original product and am now offering a rebuild service for fellow enthusiasts. Seen in the pics are the versions I can offer, one in km/h OEM style and the other converted from a mph speedo with the XR insigniture taking place of the trip meter or any one of the cc size specific dial faces. Other pics are$270Branyan, QLD•13w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 7698