Heavy Duty Platform Trolley 500kg 1370x610mm
Similar Ads
- 5.7m long Excavator Demolition Ripper 28-50 ton (110mm or 100mm pin)The price includes GST. Almost New Excavator Demolition Ripper, 5.7m long, suit 28-50 Ton machine. Great for getting to those hard to reach spots up high, out far, or down down very low. Would most suit demolition, a big machine with 110mm Pins can now reach 2 floors higher for knock downs etc. It has a full 28-50 ton headstock welded to some serious I-Beam, and with just a small ripper on the end to reduce the weight at distance. Just enough to poke through bricks, rip up timber, sheet and$4,950Pullenvale, QLD•7w
- New 1.5-4 ton (35mm pin) 430mm AHE Excavator Digging GP BucketThe price includes GST. New 430mm AHE Excavator Digging & Trenching GP Bucket suit 1.5-4 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has sat in a warehouse for a while, and there is some pitting in the bottom, we have cleaned it up and given it a fresh paint to protect it. Designed for Bobcat 331/430/E26, Komatsu PC 20-7/PC 25-1/PC 27R-8/PC 28UU-2/PC 30-7/PC 30R-8/PC 30MRX/PC 30MRX-1/PC 35R-8/PC 35R-8E/P$620Pullenvale, QLD•6w
- New 1.5-4 ton (35mm pin) 600mm AHE Excavator Digging GP BucketThe price includes GST. New 600mm AHE Excavator Digging & Trenching GP Bucket suit 1.5-4 Ton machine. This bucket has come from surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It is New & Unused but has some paint scuffs & chips from warehouse storage & handling. Designed for Bobcat 331/430/E26, Komatsu PC 20-7/PC 25-1/PC 27R-8/PC 28UU-2/PC 30-7/PC 30R-8/PC 30MRX/PC 30MRX-1/PC 35R-8/PC 35R-8E/PC 38UU-2 etc. but will fit other machines (see below list of machines we hav$790Pullenvale, QLD•6w
- 22-36 ton (90mm pin) Heavy Duty Excavator RipperThe price includes GST. Used, Solid, Heavy Duty Excavator Ripper, suit 22-36 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. Current Headstock configuration: 90mm Pin Diameter, 530mm CtoC (pin Center to pin center), 335mm BTE (Between The Ear plates). Should fit: Kato 1220SE2 / 1250SE / HD700SEV / HD900SEV. Maybe fit: Case CX240 / CX290, Kato HD1430, Kobelco SK220 / SK230 / SK2$3,250Pullenvale, QLD•3w
- 20-50 ton (90mm or 100mm pin) Heavy Duty Excavator RipperThe price includes GST. Used, Solid & Deep, Heavy Duty Excavator Ripper, suit 20-50 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. This is a seriously chunky Ripper with a solid Shank thickness of 100mm (see pics# 4 & 8). This Ripper has 100mm Diameter Pins which have been milled down in the middle to 90mm (see pics#9 & 10). They could easily be replaced back to normal 100mm pi$3,650Pullenvale, QLD•7w
- 23-47 ton (100, 90mm pin) 1500mm Heavy Duty Excavator GP Mud BucketThe price includes GST. Used 1500mm Excavator Heavy Duty Mud Bucket suit 23-47 Ton machine. Condition is used and it has a few bangs and a dent underneath but has had some professional repairs and it is a very sturdy bucket with plenty of life left and has lots of extra welds on the wearing surfaces. It has Tapered sides so the mud slides out easily and there is also extra wear strips welded underneath for durability (see pic#10). Current Headstock configuration: Front Pin Diameter is 100mm,$3,250Pullenvale, QLD•7w
- 12-36 ton (70, 80, 90mm pin) 980mm Heavy Duty Excavator GP BucketThe price includes GST. Used 980mm Excavator GP Digging Bucket suit 12-36 Ton machine. Condition is used but there is still plenty of life left. This is a heavy duty bucket with 35mm thick headstock ears, side cutting edges & reinforcing plate. There is also extra wear strips welded underneath for durability (see in pic #9 & #10). There is one tooth missing. Current Headstock configuration: 70mm Pin Diameter (inside Bosses thick enough to be bored out to suit 80mm or 90mm pins), 531mm Center$1,950Pullenvale, QLD•7w
- New 15-32 ton (80mm pin) 1200mm Warrior Heavy Duty Excavator GP BucketThe price includes GST. New 1200mm Warrior Heavy Duty Excavator GP Digging Bucket suit 15-32 Ton machine. This is a very thick & sturdy, well built bucket. The front cutting edge plate is 40mm thick! It has a deep profile for a high capacity of 0.96 cubic meters. It has removable bolt-on Side Cutters. There are extra wear plates attached to the sides and also extra wear strips welded underneath for durability (see pic# 10). Current Headstock configuration: 80mm Pin Diameter, 460mm Pin Cent$5,950Pullenvale, QLD•7w
- 22-50 ton (100/90/80mm pin) Titan Excavator Compaction WheelThe price includes GST. Used 545mm Wide Drum, Titan Excavator Compaction Wheel suit 22-50 Ton machines. 4 rows of pads and fitted with dual Mud Scrapers between the pads. Conditions is used, it has a few bangs & dints but rolls smooth and has plenty of life left. It has had several Headstock Pin Spacing modifications done which allows for a greater range of machines it can fit. This is a well engineered, heavy duty Compaction Wheel, made in Australia by Titan Manufacturing. Drum: * Width: 5$5,650Pullenvale, QLD•7w
- 10-20 ton (65mm pin) 600mm Heavy Duty Excavator Trenching BucketThe price includes GST. Used 600mm Excavator Flat Edge Blade Trenching Bucket suit 10-20 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket with thick front edge cutting plate. There is also extra wear strips welded underneath for durability (see pic# 10). There are holes ready for bolt-on side cutters if needed. Current Headstock configuration: 65mm Pin Diameter, 420mm Center to Center, 305mm Between the Ear Plates (255mm Between the Ear Bosse$1,680Pullenvale, QLD•7w
- 16-32 ton (80mm pin) 450mm Excavator Compaction WheelThe price includes GST. Used 450mm Wide Drum, Excavator Compaction Wheel suit 16-32 Ton machines. 4 rows of pads and fitted with dual Mud Scrapers between the pads. Conditions is used, it has a few bangs & dints but rolls smooth and has plenty of life left. This is a well engineered, heavy duty Compaction Wheel. Drum: * Width: 450mm. * Curved Steel Plate Diameter: 680mm (not including pads). * Total Drum Diameter (including pads): 780mm. Pads (tapered): * Height: 50mm. * Size at Top: 35mm w$4,950Pullenvale, QLD•7w
- 30-46 ton (100mm Pin) Excavator Hydraulic Vibratory Plate CompactorThe price includes GST. Used Heavy Duty Excavator Hydraulic Vibratory Plate Compactor suit 30-46 Ton machine. Condition is used but there is plenty of life left. However 2 of the 4 Rubber Dampers will need replacing soon (see pics #8 & #9), these are just fitted in place with 8 bolts and can be purchased from places like this: https://seemark.com.au/products/hydraulic-compactor/ The Hydraulic Motor is made in the USA by Permco Inc. The Headstock is removable, but the current Headstock Confi$4,950Pullenvale, QLD•7w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here