224 views
LED Fuse Lamps to suit vintage receivers amplifiers tuners etc. 8V 12V
$3.49
SHIPPING OFFERED
Shipping on this product $7.95 Australia wide regardless of quantity.
There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse.
Unfortunately, all of these decades later many of those lamps have blown, marring the operational look of your vintage device. Once again, LEDs to the rescue! These long-life LED replacements will plug straight in place of the old lamps, and have the added advantage of reducing the heat build-up within your device, and reduce it’s power consumption whilst operating.
Nearly every brand and model used 8V ac lamps, usually run from a slightly lower voltage (eg 6.5V). The 8Vac LED replacements we offer will work successfully down to 6V ac. (You could also check the manual or circuit diagram, or if all else fails measure across the lamp terminal with a multimeter.) The 8V ac lamps will also successfully operate from DC.
We currently have four colours available, enabling you to match the original look, or change the look of your unit. Some manufacturers (eg. Rotel) originally “sleeved” their incandescent lamps to provide a tint. Currently available colours:
• Warm White (will provide the same look as original incandescents)
• Ice Blue
• Royal Blue
• Emerald Green
There were a few very rare units that ran similar dial lamps from a 12V dc supply. We currently provide only a white 12V dc version. Of course the DC version is polarity conscious, it will only work “one way around” on DC.
On average these LED lamps draw about 20mA each, about 1/10 the consumption of the incandescent lamps they replace.
LED lamp units measure 29mm x 6.35mm.
We do also stock traditional incandescent fuse lamps. Click Here.
Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup from Brisbane or Ipswich can also be arranged.
There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse.
Unfortunately, all of these decades later many of those lamps have blown, marring the operational look of your vintage device. Once again, LEDs to the rescue! These long-life LED replacements will plug straight in place of the old lamps, and have the added advantage of reducing the heat build-up within your device, and reduce it’s power consumption whilst operating.
Nearly every brand and model used 8V ac lamps, usually run from a slightly lower voltage (eg 6.5V). The 8Vac LED replacements we offer will work successfully down to 6V ac. (You could also check the manual or circuit diagram, or if all else fails measure across the lamp terminal with a multimeter.) The 8V ac lamps will also successfully operate from DC.
We currently have four colours available, enabling you to match the original look, or change the look of your unit. Some manufacturers (eg. Rotel) originally “sleeved” their incandescent lamps to provide a tint. Currently available colours:
• Warm White (will provide the same look as original incandescents)
• Ice Blue
• Royal Blue
• Emerald Green
There were a few very rare units that ran similar dial lamps from a 12V dc supply. We currently provide only a white 12V dc version. Of course the DC version is polarity conscious, it will only work “one way around” on DC.
On average these LED lamps draw about 20mA each, about 1/10 the consumption of the incandescent lamps they replace.
LED lamp units measure 29mm x 6.35mm.
We do also stock traditional incandescent fuse lamps. Click Here.
Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup from Brisbane or Ipswich can also be arranged.
- Date Listed:02/08/2023
- Last Edited:02/08/2023
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- LED Dancefloor Buy 6 x 6mCall us and chat with us today about getting a Dancefloor of your own. Speak to our team to understand which dancefloor size suits your requirements best. Comes with the latest controllers for various light settings and travel boxes easy to transport from one place to the other. Great setup for corporate weddings, parties, birthdays etc. Inclusion • Size: 6 x 6m • Lightens up the room • Maximizes the space making it an outstanding addition to the event. • Attractive that it makes people dan$20,000South Brisbane, QLD•62w
- Comsol Video Splitter VSA12, D6F3E1D672 - Great ConditionSale Includes 1 x Comsol Video Splitter VSA12, D6F3E1D672 - Great Condition Buy in confidence with our 30 day return-to-base warranty. See terms and conditions for more information. Condition Item is used but in great working order when it was removed from service.Overall conditions is good. The images in the listing is a sample of one of the units. Cosmetic conditions may vary between the units. The unit has been tested and is in great working order. There are mi$20Wacol, QLD•353w
- 82 AKAI Premium Silver Component HiFi Vinyl Cassette Aux RESTRD w WTYSUBSIDISED INSURED SHIPPING ON THIS COMPLETE SYSTEM $120 AUSTRALIA WIDE, $10 BRISBANE / IPSWICH areas in SEQ. Dating from 1982 these fully restored (with warranty) Hi-Fi components from Japan’s Akai even come with their original owner’s manuals and of course look like the matched system that they are. One owner, one location for the last 4 decades! One of Akai’s premium offerings at the time based around higher quality components than were sometimes found in package deals. There’s a direct dr$1,375SHIPPING OFFEREDBulimba, QLD•10h
- Beautiful Akai AA-5210 2x18W Amplifier Silver Woodgrain 75 Restd w WTYAkai just made just beautiful gear in the mid 70s, and this AA5210 emphasises the fact… conservatively rated at 18 watts per channel into 4Ω but weighing in at a very solid 7.2kg is the first clue that it’s a no-compromise design. A closer look reveals a beautiful brushed aluminium front panel, solid machined aluminium knobs with rubber inlays, and under the cover first rate components and beautiful construction. It sounds every bit as good as it looks and feels. Of course because available pow$395SHIPPING OFFEREDBulimba, QLD•10h
- Kenwood KX-W1060 Dual Twin Cassette Deck, Dolby, 2 Tape Type restd WTYAs dual cassette decks go Kenwood’s 1996 KX-W1060 is a pretty basic affair, but it IS a Kenwood, and following a full service it performs faultlessly and can be expected to do so for many years to come. Both decks have traditional lever push controls, and are full autostop. The right hand deck can both play and record, whereas the left hand deck is play only. A rudimentary LED level meter is fitted, as is Dolby B noise reduction, and a setting for both normal and Cr02 tapes. A user manual co$295SHIPPING OFFEREDBulimba, QLD•10h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 5455