204 views
LED Fuse Lamps to suit vintage receivers amplifiers tuners etc. 8V 12V
$3.49
SHIPPING OFFERED
Shipping on this product $7.95 Australia wide regardless of quantity.
There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse.
Unfortunately, all of these decades later many of those lamps have blown, marring the operational look of your vintage device. Once again, LEDs to the rescue! These long-life LED replacements will plug straight in place of the old lamps, and have the added advantage of reducing the heat build-up within your device, and reduce it’s power consumption whilst operating.
Nearly every brand and model used 8V ac lamps, usually run from a slightly lower voltage (eg 6.5V). The 8Vac LED replacements we offer will work successfully down to 6V ac. (You could also check the manual or circuit diagram, or if all else fails measure across the lamp terminal with a multimeter.) The 8V ac lamps will also successfully operate from DC.
We currently have four colours available, enabling you to match the original look, or change the look of your unit. Some manufacturers (eg. Rotel) originally “sleeved” their incandescent lamps to provide a tint. Currently available colours:
• Warm White (will provide the same look as original incandescents)
• Ice Blue
• Royal Blue
• Emerald Green
There were a few very rare units that ran similar dial lamps from a 12V dc supply. We currently provide only a white 12V dc version. Of course the DC version is polarity conscious, it will only work “one way around” on DC.
On average these LED lamps draw about 20mA each, about 1/10 the consumption of the incandescent lamps they replace.
LED lamp units measure 29mm x 6.35mm.
We do also stock traditional incandescent fuse lamps.
Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup from Brisbane or Ipswich can also be arranged.
There’s nothing quite like the look of an old school receiver / amplifier / tuner etc. with a lighted up dial. To achieve the result many manufacturers ( Marantz, Pioneer, Harman Kardon, Rambler, Pioneer, Sansui, Yamaha, Sony, Philips, AWA, Rotel and so many others) used a user replaceable lamp (no soldering required) commonly referred to as a “fuse lamp” because of its resemblance to a 3AG glass fuse.
Unfortunately, all of these decades later many of those lamps have blown, marring the operational look of your vintage device. Once again, LEDs to the rescue! These long-life LED replacements will plug straight in place of the old lamps, and have the added advantage of reducing the heat build-up within your device, and reduce it’s power consumption whilst operating.
Nearly every brand and model used 8V ac lamps, usually run from a slightly lower voltage (eg 6.5V). The 8Vac LED replacements we offer will work successfully down to 6V ac. (You could also check the manual or circuit diagram, or if all else fails measure across the lamp terminal with a multimeter.) The 8V ac lamps will also successfully operate from DC.
We currently have four colours available, enabling you to match the original look, or change the look of your unit. Some manufacturers (eg. Rotel) originally “sleeved” their incandescent lamps to provide a tint. Currently available colours:
• Warm White (will provide the same look as original incandescents)
• Ice Blue
• Royal Blue
• Emerald Green
There were a few very rare units that ran similar dial lamps from a 12V dc supply. We currently provide only a white 12V dc version. Of course the DC version is polarity conscious, it will only work “one way around” on DC.
On average these LED lamps draw about 20mA each, about 1/10 the consumption of the incandescent lamps they replace.
LED lamp units measure 29mm x 6.35mm.
We do also stock traditional incandescent fuse lamps.
Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup from Brisbane or Ipswich can also be arranged.
- Date Listed:17/12/2023
- Last Edited:17/12/2023
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- Tannoy FX5.1 surround speakers & Pioneer VSX516-S7 surround receiverThe Pioneer VSX516-S 7 channel multi channel receiver produces a powerful 7 x 100wpc when in surround mode and 2 x 110wpc in stereo mode. It comes with a remote and has the original user manual. The Tannoy FX 5.1 surround speaker system has five individual two way speakers and a powered subwoofer with a built in amplifier. Speaker cable is included. In excellent all round cosmetic and operational condition. I have attached further information of the products from the net. Pioneer VSX516S Over$275Windsor, QLD•17w
- Onkyo Dynamic Four 800 stereo receiverVintage, stereo receiver amplifier, silver fronted, timber case with AM/FM radio dial illuminated blue with the ever-desirable VU signal metre. Conservative 15wpc @ 8ohms. 2X speaker systems, Phono (turntable), auxiliary, Tuner, & Tape inputs, amounting to 2 line level inputs for your iPod, CD player, computer or TV audio. Treble, bass tone controls, loudness, microphone jack. Tape in/out for tape recording or Equalizer connections. Bare wire aerial connections provided if reception is limi$245NegotiableWindsor, QLD•20w
- TOSHIBA SB-M2 Amplifier and ST-U2 AM/FM TunerPlease call or text to for fast response. Very Good Working Condition Matching TOSHIBA SB-M2 2x30W amplifier ST-U2 AM/FM tuner sold as pair This matching Toshiba (Made in Japan) Tuner and Amplifier dating from 1983 come complete with all appropriate leads, antennas etc. Toshiba SB-M2 Hi Fi amplifier is an excellent performer with all commonly needed features. It’s finished in silver, and features slide controls for bass, treble and balance, and a lighted panel to show selected input$120SHIPPING OFFEREDNegotiableAlgester, QLD•9w
- Realistic SA-150 Mini Integrated Stereo AmplifierPlease call or text to for fast response. Very Good Working Condition Vintage Realistic SA 150 Mini Stereo Amplifier 31-1955 by Radio Shack Miniture stereo integrated amplifier with timber case. Phono in (Switch on backside: Ceramic or Magnetic), Tape in, Tuner, Tape out, and Speakers out. Treble, bass tone controls, mono switch, earphones jack. RCA speaker connection wires supplied. Specifications: Power consumption: AC 240V 25Watts Frequency response: 20Hz to 25kHz Total harmonic d$99SHIPPING OFFEREDAlgester, QLD•5w
- Vintage Hifi wantedVintage Hifi wanted $$$$ wanted Wanted wanted Looking for old hi fi audio systems (working or non working) including turntables, amplifiers, receivers, speakers etc. I can collect from any location around brisbane and arrange pickup from most of the locations in Queensland . Please message/text me or give me a call. Happy to have a chat Thanks$123SHIPPING OFFEREDNegotiableLogan Reserve, QLD•95w
- Marantz SR9200 Receiver Amplifier - top vintage perfect ConditionMarantz SR9200 Receiver Top of the line Vintage Amplifier - All functions working perfectly with power 160 watts even all Channels- Frequency Response 8Hz - 80kHz . Welcome for listening and inspection$495Darra, QLD•22w
- Vintage Sharp SC-103X Stereo SystemPlease call or text to for fast response. Beautiful vintage stereo system. Comes with speaker cables. Fully serviced, excellent working condition. Wonderful sound, top quality cassette deck. Stereo Amplifier, AM/FM Srereo Tuner, 4-erack 2-channel Stereo Cassette Player/Recorder. Specifications: Model: SC-103X - Sharp; Osaka Main principle Superheterodyne Power type and voltage Alternating Current supply (AC) / 110; 120; 220; 240 Volt Material Wooden case Shape Tablemodel Dimens$275SHIPPING OFFEREDNegotiableAlgester, QLD•19w
- ONKYO 7.1 RECIEVER, SUBWOOFER, TOWERS & CENTRE SPEAKERS WAS $400Originally cost $1300. I'm replacing it with a new system, looking for a quick sale. Reduced from 400 to 350. Cash on collect. ONKYO TX-SR576 AV RECEIVER 7.1-channel surround-sound decoder and amplifier 80 Watts/Channel @ 8 ohms Dolby Digital Plus HDTV-Ready Component Video Switching (2 Inputs/1 Output) 4 Digital Inputs (2 Optical/2 Coaxial/4 Assignable) 3 S-Video Inputs/2 Outputs Powered Zone 2 Colour-Coded 7.1 Multichannel Inputs ACCENT AN-SW31BG ACTIVE SUBWOOFER 12 Inch Bass speaker 120$200NegotiableUpper Kedron, QLD•3w
- Vintage Denon TU-530 FM Stereo TunerVintage Denon TU-530 FM Stereo Tuner in Very Good Condition Specifications Type: Mono/Stereo Tuner Tuning Bands: FM Tuning Scale: Analogue FM Tuning Range: 88 to 108 MHz Sensitivity: 1.7uV (FM) Signal to Noise Ratio: 79dB (FM) Distortion: 0.12% (FM) Selectivity: 35dB (FM) Frequency response: 20Hz to 15kHz (FM) Output: 1000mV Dimensions: 434 x 99 x 364mm Weight: 7.8kg$150Thornlands, QLD•10w
- DUAL Vintage TurntableDUAL 1218 Automatic Turntable Original Shure M91ED Cartridge New Eliptical Diamond Stylus 3 Speed and 3 Record size Selector Heavy Turntable for low Wow and Flutter Mechanism Cleaned and Lubricated Wooden Plinth in Excellent condition New Power Cord Connect your favorite Amplifier: Akai, Sansui, Kenwood, Marantz, Sony, Denon, Luxman, JVC, Philips, Realistic, Sharp, Toshiba, Thorens, Dual, Pioneer. ETC. Prefer Local Pick up$280Everton Park, QLD•1w
- New Custom made to size TURNTABLE LID COVER High Quality AcrylicBrand new, custom made to size, AND we'll ship Australia wide for just $19.95! Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup$129SHIPPING OFFEREDBulimba, QLD•2d
- New 3mm Acrylic LP Vinyl Record Now Playing display stand Made AustBased in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via direct deposit, secure credit card, or Afterpay. Pickup from Brisbane or Ipswich can also be arranged. Part of the enjoyment we gain f$34.95SHIPPING OFFEREDBulimba, QLD•2d
- NAD 502 CD Player Analogue & Coax out MASH DAC 1994 VGC Restrd w WTYNAD have been making excellent CD players for almost as long as the format has existed. This 502 is basically an updated version of the earlier 5420 / 5425. In addition to the analogue audio output the unit has a coax digital output. In typical NAD style it has a simple no-nonsense panel layout that’s easy to follow. No remote is included, but all functions are accessible from the front panel. An audio lead will be included. The 502 features the MASH DAC technology that was originally develop$259SHIPPING OFFEREDBulimba, QLD•3d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here