387 views
DYMAXION Diamond Core Drill & Stand▪️AGCDM250▪️USED▪️
$1,200
💰Price when New: ~$2,700 ➖ Our Price: $1,200 (the stand alone is worth ~$950 new💰
This machine with a powerful 2200W motor and contemporary gear ratio engineering enables it to drill up to 250mm in reinforced concrete and weighs 25.3kg.
Fitted with electronic overload protection, three drilling speeds, built in bubble levels, water swivel, R.C.D. protection and is supplied ready attached to the rig (AGDMRIG)
Concrete core drilling requires a great deal of torque force particularly when drilling through steel reinforcing rods, additionally floors 300mm thick are not uncommon so these are all practical reasons to consider this machine favorably with its adequate power of 2200 watts.
——————————
Core Drill Stand (AGDMRIG):
The AGDMRIG provides the latest in product benefits and is made to a high quality standard of finish.
The base is die cast aluminium with extruded mast and is supplied with wheels. The four leveling bolts are a wide distance apart for maximum stability when bolted down to the surface and is also fitted with additional stabalising back stays.
The single winding handle is used in several locations to make adjustments. Four nylon guide wheels firmly secure the machine bracket to the mast and allow for smooth travel.
Rig angle capacity: 90 - 45˚
Rig height from bracket to floor: 820mm
Four of the DYMAXION core drill machines (AGCDM250 & AGCDM160 & AGCDM80 & PCD1700HH) can be fitted to this single rig by using the dove tail mounting blocks which fit on/off in short time. Note that the AGCDM250 is supplied ready fitted to the AGDMRIG
This machine with a powerful 2200W motor and contemporary gear ratio engineering enables it to drill up to 250mm in reinforced concrete and weighs 25.3kg.
Fitted with electronic overload protection, three drilling speeds, built in bubble levels, water swivel, R.C.D. protection and is supplied ready attached to the rig (AGDMRIG)
Concrete core drilling requires a great deal of torque force particularly when drilling through steel reinforcing rods, additionally floors 300mm thick are not uncommon so these are all practical reasons to consider this machine favorably with its adequate power of 2200 watts.
——————————
Core Drill Stand (AGDMRIG):
The AGDMRIG provides the latest in product benefits and is made to a high quality standard of finish.
The base is die cast aluminium with extruded mast and is supplied with wheels. The four leveling bolts are a wide distance apart for maximum stability when bolted down to the surface and is also fitted with additional stabalising back stays.
The single winding handle is used in several locations to make adjustments. Four nylon guide wheels firmly secure the machine bracket to the mast and allow for smooth travel.
Rig angle capacity: 90 - 45˚
Rig height from bracket to floor: 820mm
Four of the DYMAXION core drill machines (AGCDM250 & AGCDM160 & AGCDM80 & PCD1700HH) can be fitted to this single rig by using the dove tail mounting blocks which fit on/off in short time. Note that the AGCDM250 is supplied ready fitted to the AGDMRIG
- Date Listed:28/08/2023
- Last Edited:28/08/2023
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Hilti DD-CR1 Diamond Core Drill Machine StandNote that the handle axle is bent on the end but it does not affect its operation. Specifications: Condition: Used Type: Drill Stand Make: Hilti Model: DD-CR1 Stroke: 300mm Anchor: Vacuum or HKD M8/HDI 3/8" anchors Accessories: Nil Suits: DD-EC-1 Diamond Coring Machine Weight: 8.5kg Replacement price on this item is approximately AUD$1120$350West Swan, WA•290w
- Hilti DD-ST 150-U CTL Concrete Core Drill StandThree available - end of project Specifications: Condition: Used Type: Vacuum Base Diamond Core Drilling Stand Make: Hilti Model: DD-ST 150-U CTL Serial: 042124 Base: 470 x 246mm Height: 953mm Fix: Vacuum Accessories: Handle Weight: 14.5kg Replacement price on this unit is approximately AUD$2800$1,000West Swan, WA•4d
- PN drill bit diamond core bit 50mmPN drill bit diamond core 50mm$55Guildford, WA•75w
- Hilti core drillMachine is in good condition,comes with stand and 132mm core bit$1,200Beechboro, WA•7w
- HILTI core drill DDEC-1 (missing some attachments)-GB776726HILTI core drill DDEC-1 (missing some attachments)- Good condition 776726 We are CASH CITY 3/46 JAMES STREET, GUILDFORD. PERTH. W.A Our Trading Hours are : SUNDAY - FRIDAY 9AM - 5PM. Got a spare Hour? Feel free to drop in and check out our HUGE Range of Second Hand Goods. From the Old. To the Modern and definitely Unique. We get it all !! We also do Lay by's. Conditions do apply. PAWNBROKERS LIC : 1437 SECONDHAND LIC: 1436$600Guildford, WA•12w
- Core drill bitCore drill bit new, with extension, 127mm diam. x 500 long, 9 segments, extension 800 long, suit fencer, $100 - Inquiries by phone$100Ballajura, WA•11w
- Dimas core drillWorks well, comes with core drill bit plus spanner$560NegotiableEllenbrook, WA•141w
- Concrete core drill bit150 mm Dimond core drill bit suit large drill Good used condition No longer required$100Ellenbrook, WA•4d
- Core drill bits $50eachCore drill bits are in good condition just a bit of surface rust length 450mm, diameter 32mm length 450mm, diameter 63mm$50NegotiableEllenbrook, WA•292w
- Metabo MAG32 1000W Magnetic Drill - core annular cutter
- Metabo
** Please note that this unit does not come with a fluid bottle. "Features: • Powerful magnetic core drill with large lift for core and full drilling • Robust Metabo Marathon Motor for up to 5 times increased service life for extra long service life • Integrated coolant container for optimal cooling of vertical and horizontal bores • Automatic coolant feed to the tip of the drill bit enables the machine to be used single-handedly • Magnet base with high holding power for safe operation$800West Swan, WA•98w
- Oversized Cocktail Glass▪️ICE BUCKET▪️Floor Standing▪️Party▪️1m high**SALE** $200 (normally $250) ➖OR➖ 2 for $350 (normally $400) GIANT▫️JUMBO▫️EXTRA LARGE▫️Acrylic Martini Cocktail Novelty Glass ‼️ The first few pics are for illustrative purposes only - the ones we have on offer are the cocktail /martini ones shown in the last few photos‼️ Approx. Height: 970mm / 37” Approx. Width: 600mm / 23” Suitable for many occasions: Weddings / House, Pool, Garden, Birthday or Engagement Party / Sports Social event / Work function.. this is sure to make a great feat$200Bullsbrook, WA•7h
- Set of 5 x MasterLock 410KARED SAFETY LOCKOUT PADLOCK (Keyed Alike)MasterLock 410KARED Safety Lockout / Tagout Padlock Set of 5 Key: 48F242 ▪️PICK-UP: from Bullsbrook by appointment. Please message through preferred dates / times to schedule ▪️DELIVERY: $5 Australia Wide - 410 Thermoplastic Safety Padlock - 1-1/2in (38mm) wide, 1-3/4in (44mm) tall Thermoplastic red body, shackle with 1-1/2in (38mm) clearance - Designed exclusively for lockout tagout applications - Durable, lightweight, non-conductive Thermoplastic lock body - Customize on-site with permanen$95Bullsbrook, WA•1d
- Alemlube 1/2” S Series 10m Oil Hose & Reel - SOI700‼️‼️ Cheapest I could find elsewhere at time of posting (26/4/24) was $630‼️‼️ ▪️PICK-UP: from Bullsbrook by appointment. Please message through preferred dates / times to schedule ▪️DELIVERY: $15 Australia Wide ALEMLUBE - S Series Oil Reel 10 - SOI700 The Alemlube SOI700 oil hose reel is a genuine industrial quality hose handling, retrieval and storage system with highly flexible and durable S.A.E.100R1 rubber hose, crimped hose ends, integral carry handle and detachable mounting bracket.$580Bullsbrook, WA•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here