50 views
Gold Coast Real Timber Hardwood Decking Shiplap and Panel
$2.57
SHIPPING OFFERED
Hardwood Decking SPECIALS
Forest Reds Feature Grade (2nd Grade)
72x22 $2.79, 80x20 $3.60, 82x22 $3.78, 90x20 $4.56, 94x22 $5.16, 118x20 $6.53,
122x22 $6.97, 140x20 $8.73, 144x22 $9.47
Blackbutt Feature Grade (2nd Grade)
70x20 $3.04, 72x22, $3.31, 80x20 $4.11, 82x22 $4.27, 90x20 $5.45, 94x22 $6.18,
113x19 $7.31, 118x20 $7.81, 122x22 $8.33, 135x19 $9.60, 140x20 $10.45,
144x22 $11.33, 158x24, $13.78, 163x27 $15.70
Mixed Hardwood Utility Grade (3rd Grade)
070x20 $1.61, 080x20-$2.30, 090x20 $2.74, 113x19$3.66, 135x19 $4.38
Decking isn’t a sideline for us. We’re a dedicated Hardwood Sawmill set up and specifically programmed to produce Hardwood Decking, Shiplap and Wall Panel. The time capsules that we harvest grows locally and within sight of our sawmill. You can still buy the same solid hardwood that we used to build our infrastructure many years ago.
A structure built from heavier locally grown hardwood is likely to last longer and be more durable than one built from glued waste pine sawdust and plastic.
Which brings me to composite decking. Most composite decking is basically 50% wood fibre and 50% plastic. It’s all good to say that the “glue” is weatherproof and will last forever but the timber fibre used was probably cheap waste pine fibre in the first place. Composite deck may not wear as well as natural hardwood in that it may not be as hard as natural hardwood. Some of the more expensive composite decking products are fully sealed with thin layer of plastic. They did this to stop the moisture from entering the composite board and deep mould occurring in the wood fibre. The thin plastic protective layer is all good until it too gets scratched, damaged or broken down by the sun or moisture.
It would appear, even today, that it’s very difficult to get composite engineered products to outdo the natural hardwood product when exposed to full weather. By the simple fact that most engineered products are nailed or screwed in some way during their installation, this allows moisture to enter which ultimately is the cause for the premature decay of these products.
While solid hardwood can be scratched, banged and abused all day long, it can always be lightly sanded and re coated back to new.
Our sawmill was built somewhere around 1910 and it’s standing and being worked hard, daily. There is no way on this earth, if it had been built from composite decking, particle board, laminated beams or plywood that it would still be standing today.
Thanks for your time and interest. Please call 07******1008 anytime for any questions and options regarding our timber products. For orders less than $450.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to the Gold Coast, Helensvale, Southport, Labrador, Surfers Paradise, Carrara, Pacific Pines, Main Beach, Biggera Waters, Bundall, Broad Beach, Mermaid Beach, Ashmore, Robina, Burleigh Heads, Mudgeeraba, Elanora, Currumbin, Oxenford, Paradise Point, Runaway Bay, Nerang, Coomera, Tamborine, Beaudesert and surrounding suburbs. Or pickup at the Sawmill Monday to Saturday.
A big problem with outdoor deck failure is rotten floor joist. The old style 50mm wide FJ’s split from having 500 nails belted into them. The moisture gets into them and then they fall apart. Consider using our 60mm and 92mm hardwood joists. If you’re chasing good quality stair treads, take a look at our dried dressed 240x43 Blackbutt currently available in two grades. Check out the special crazy low price on the 94x20 Utility Grade (third grade). Make the wife a Planter Box or spruce up the Doghouse! – it’s super cheap at present. We keep a good range of lengths in stock up to about 5.0 metres in length.
Forest Reds Feature Grade (2nd Grade)
72x22 $2.79, 80x20 $3.60, 82x22 $3.78, 90x20 $4.56, 94x22 $5.16, 118x20 $6.53,
122x22 $6.97, 140x20 $8.73, 144x22 $9.47
Blackbutt Feature Grade (2nd Grade)
70x20 $3.04, 72x22, $3.31, 80x20 $4.11, 82x22 $4.27, 90x20 $5.45, 94x22 $6.18,
113x19 $7.31, 118x20 $7.81, 122x22 $8.33, 135x19 $9.60, 140x20 $10.45,
144x22 $11.33, 158x24, $13.78, 163x27 $15.70
Mixed Hardwood Utility Grade (3rd Grade)
070x20 $1.61, 080x20-$2.30, 090x20 $2.74, 113x19$3.66, 135x19 $4.38
Decking isn’t a sideline for us. We’re a dedicated Hardwood Sawmill set up and specifically programmed to produce Hardwood Decking, Shiplap and Wall Panel. The time capsules that we harvest grows locally and within sight of our sawmill. You can still buy the same solid hardwood that we used to build our infrastructure many years ago.
A structure built from heavier locally grown hardwood is likely to last longer and be more durable than one built from glued waste pine sawdust and plastic.
Which brings me to composite decking. Most composite decking is basically 50% wood fibre and 50% plastic. It’s all good to say that the “glue” is weatherproof and will last forever but the timber fibre used was probably cheap waste pine fibre in the first place. Composite deck may not wear as well as natural hardwood in that it may not be as hard as natural hardwood. Some of the more expensive composite decking products are fully sealed with thin layer of plastic. They did this to stop the moisture from entering the composite board and deep mould occurring in the wood fibre. The thin plastic protective layer is all good until it too gets scratched, damaged or broken down by the sun or moisture.
It would appear, even today, that it’s very difficult to get composite engineered products to outdo the natural hardwood product when exposed to full weather. By the simple fact that most engineered products are nailed or screwed in some way during their installation, this allows moisture to enter which ultimately is the cause for the premature decay of these products.
While solid hardwood can be scratched, banged and abused all day long, it can always be lightly sanded and re coated back to new.
Our sawmill was built somewhere around 1910 and it’s standing and being worked hard, daily. There is no way on this earth, if it had been built from composite decking, particle board, laminated beams or plywood that it would still be standing today.
Thanks for your time and interest. Please call 07******1008 anytime for any questions and options regarding our timber products. For orders less than $450.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to the Gold Coast, Helensvale, Southport, Labrador, Surfers Paradise, Carrara, Pacific Pines, Main Beach, Biggera Waters, Bundall, Broad Beach, Mermaid Beach, Ashmore, Robina, Burleigh Heads, Mudgeeraba, Elanora, Currumbin, Oxenford, Paradise Point, Runaway Bay, Nerang, Coomera, Tamborine, Beaudesert and surrounding suburbs. Or pickup at the Sawmill Monday to Saturday.
A big problem with outdoor deck failure is rotten floor joist. The old style 50mm wide FJ’s split from having 500 nails belted into them. The moisture gets into them and then they fall apart. Consider using our 60mm and 92mm hardwood joists. If you’re chasing good quality stair treads, take a look at our dried dressed 240x43 Blackbutt currently available in two grades. Check out the special crazy low price on the 94x20 Utility Grade (third grade). Make the wife a Planter Box or spruce up the Doghouse! – it’s super cheap at present. We keep a good range of lengths in stock up to about 5.0 metres in length.
- Date Listed:19/04/2024
- Last Edited:19/04/2024
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- CABOTS Natural Decking Oil / Paint. 10lt. Jarrah10lt CABOT'S Natural Decking Oil / Paint. Jarrah Colour. New. Unopened. Pick Up And Cash Only Northern End of Gold Coast$100NegotiableBiggera Waters, QLD•3d
- VALSPAR Decking Oil / Paint 10lt. Redwood. Manufactured in AustraliaValspar Decking Oil / Paint. 10lt Redwood Colour. Manufactured Here In Australia. Valspar Is A Large American Company That Purchased Wattyl Australia. It Has A Very Good Name In The States For Manufacturing Quality Paint Products. NEW. NEVER OPENED. Grab Yourself A Bargain $80 For 10lt. Pick Up Northern Gold Coast CASH ONLY$80NegotiableBiggera Waters, QLD•3d
- FRAMELESS SHOWER SCREEN GLASS PANEL DIY 2000h x 1100w Gold CoastShower Screen Frameless Glass Panel DIY 🥇 10mm Toughened Glass FPE 📏 Size: 2000h x 1100w 👍 Brand new, wrapped. 🛡️ Complies with Australian Safety Standards, AS/NZS 2208 👉 Range of Highest Quality Fittings in Stock 📏 We can also supply all size panels: 800/850/900/950******1050******1150******1300/1400 Give us a ring if any advice needed! Professional installation is available upon request 🔔 🔔 🔔 🔔 🔔 🔔 🔔 🔔 🚚 Pick up Bundall store OR Deliver to Gold Coast, Bris$334Bundall, QLD•1w
- GLASS POOL FENCE GATES 1200mm H x 750-1000mm W 8-12mm DIY Gold CoastFrameless Modern Glass Pool Fence Gates in 8mm and 12mm for DIY only 👉 Toughened Glass 📏Height is 1200mm 📏8 mm TG Width: 750/834/890/1000mm 📏12mm TG Width: 800/900mm 12mm TG Wall Post 800/900mm 🛡️ All Products Complie with Australian Safety Standards, AS/NZS 2208 Also we Stock all Glass Panels Sizes Available in 1200mm H: 👉Width: 200/250/300/350/400/450/500/550/600/650/700/750/800/850/900/950/1000 *****1100******1200******1300******1400******1500******1600******1700/1750$54Bundall, QLD•1w
- Sliding Rail System for Wall Mount Glass Installation DIY Gold CoastSliding Rail System with stylish exposed door rollers DIY - don't hesitate to ask us how! We' are here to help! Top quality Hardware 📏 Size: Adjustable up to 2900mm ✔️ Anti-lift technology for extra safety ✔️ Stainless Steel construction - ideal for internal installations ✔️ Satin or Matt Black ✔️ Suitable for 10-12mm Glass panels 👍 Brand new, wrapped. 🛡️ Complies with Australian Safety Standards, AS/NZS 2208 👉 We can customize any size and type glass panels to suit your$531Bundall, QLD•1w
- AUSTRALIAN SHOWER SCREENS WARDROBES Gold CoastAustralian Shower Screens and Wardrobes can help transform your home or office to a modern and beautiful place 🔔 🔔 🔔 🔔 🔔 🔔 🔔 🔔 👉 WHAT WE OFFER: ✔️ SHOWER SCREENS: Frameless, Semi Frameless, Sliding, Pivot, and Panels ✔️ STEEL FENCING & GATES ✔️ Wall fittings and fixtures ✔️ GLASS cut to any size also ✔️ WARDROBE SLIDING DOORS:Framed or Frameless, Mirror, Vinyl, Glass, Gyprock ✔️ MIRRORS CUT TO SIZE: FPE, Framed ✔️ KITCHEN COLOURED GLASS SPLASHBACKS: Arrange of colours ✔️ FRAME$89Bundall, QLD•1w
- FRAMELESS SHOWER SCREEN KIT FRONT 2050 H TG All Sizes DIY Gold Coast✔️ We also custom make screens to any size ✔️ We stock all size KITS 🔔 🔔 🔔 🔔 🔔 🔔 🔔 🔔 🚚 Pick up Bundall store OR Deliver to Gold Coast, Brisbane, Tweed Heads,Bryon Bay. 👉 WHAT ELSE WE OFFER: ✔️ SHOWER SCREENS: Frameless, Semi Frameless, Sliding, Pivot, and Panels ✔️ STEEL FENCING & GATES ✔️ Wall fittings and fixtures ✔️ GLASS cut to any size also ✔️ WARDROBE SLIDING DOORS:Framed or Frameless, Mirror, Vinyl, Glass, Gyprock ✔️ MIRRORS CUT TO SIZE: FPE, Framed ✔️ KITCHEN COLOU$531Bundall, QLD•1w
- 190 x 35mm TREATED PINE TIMBER OFFCUT LENGTHS 45cm 47cm190 x 35mm TREATED PINE TIMBER OFFCUTS Stored in garage Stains from things being put on top of it. These havent been used but I have listed them as used due to the stains and scratches on them. Sand them down and reuse them Lengths 1x 45cm 1 x47cm Pickup from Marine Parade in Southport Gold Coast Contact me via messages to check when I am free for pickup Also check out my other listings. I can give discounts on items when you buy more things. https://www.gumtree.com.au/s-seller/MP/1002866322$5Southport, QLD•134w
- CABOTS CFP Interior Timber, Parquetry, Cork . Oil / Stain. 10lt SatinCabot's Interior Clear Flooring. Polyurethane for all timber, parquetry & cork flooring. Satin 10lt. New and unopened Average retail price $260 Grab Yourself A Bargain $100 Cash and Pickup Only. Northern end of Gold Coast$100NegotiableBiggera Waters, QLD•2d
- SHOWER SCREEN PANELS & GLASS CUT TO SIZEShower Screen Frameless Panels & Glass Cut To Any Size Width Sizes: 700,800,900******1100******1300,1400 Height: 2050 * Hinges & U Channels in stock Installations & Delivery OR DIY All areas of Gold Coast PLS GLASS All enquiries please phone:$99Broadbeach, QLD•39w
- Sunshine Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDMaroochydore, QLD•7h
- Gold Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBundall, QLD•7h
- Brisbane Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBrisbane City, QLD•7h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 1008