141 views
SLASHER 4FT 1200mm CAT1, 3PL OFFSET 30HP Part No.: SM120OFFSET10
$2,450
STRUTFIT PTY LTD
FACTORY 4/6 FOWLER ROAD
DANDENONG SOUTH
VIC 3175
PH ******8322
SLASHER β 4FT 1200mm Medium Duty CAT1, 3PL for tractors 30HP Part No.: SM120OFFSET10" Code No.6
Code No.: 6
Part No.: SM120OFFSET10"
Shipping weight & size :284KGX162X152X62CM
Description :
4ft Slasher Medium Duty - 30 TO 45HP Gearbox - 4mm Smooth top deck
This slasher is perfect for general cutting and clearing, and to cut grass and light undergrowth. Reinforced smooth deck and floating A frame with rear discharge and adjustable skids.
CAN BE USED CENTER LIFT OR 10INCH OFFSET FOR CUTTING HAY.
Features:
Solid steel construction with reinforced 4mm smooth top deck (won't clog up with debris)
Fitted with 1:1.93 ratio 45HP Gearbox with noise reduction
Cutting width: 1150mm
High grade steel rotor bar and heat treated cutting blades
3 point linkage - category 1
PTO speed: 540rpm
4 position cutting height (with adjustable skids): 25-100mm
Supplied with PTO shaft fitted with slip clutch.
Front and rear safety chains and PTO safety covers
Oil Required - No oil is shipped with this item, you must add EP80/90 or HD140 gearbox oil before first use.
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all return instructions provided to you via phone or your registered email address. All returns must be directed through Customer Service. If you do without instructions, there is a risk that your returned item may not be identifiable and your returns may not be accepted.
When a return is authorised, it is the buyerβs responsibility to ensure the product is packaged securely to prevent any damage during the return process. Failure to do so may affect the ultimate resolution to be offered, which may include repairs, replacement items or store credit at our discretion.
Applicable freight fees plus a 10% restocking fee will be deducted from your refund in cases where you have changed your mind and wish to return your product. This also applies to orders cancelled while in transit.
FACTORY 4/6 FOWLER ROAD
DANDENONG SOUTH
VIC 3175
PH ******8322
SLASHER β 4FT 1200mm Medium Duty CAT1, 3PL for tractors 30HP Part No.: SM120OFFSET10" Code No.6
Code No.: 6
Part No.: SM120OFFSET10"
Shipping weight & size :284KGX162X152X62CM
Description :
4ft Slasher Medium Duty - 30 TO 45HP Gearbox - 4mm Smooth top deck
This slasher is perfect for general cutting and clearing, and to cut grass and light undergrowth. Reinforced smooth deck and floating A frame with rear discharge and adjustable skids.
CAN BE USED CENTER LIFT OR 10INCH OFFSET FOR CUTTING HAY.
Features:
Solid steel construction with reinforced 4mm smooth top deck (won't clog up with debris)
Fitted with 1:1.93 ratio 45HP Gearbox with noise reduction
Cutting width: 1150mm
High grade steel rotor bar and heat treated cutting blades
3 point linkage - category 1
PTO speed: 540rpm
4 position cutting height (with adjustable skids): 25-100mm
Supplied with PTO shaft fitted with slip clutch.
Front and rear safety chains and PTO safety covers
Oil Required - No oil is shipped with this item, you must add EP80/90 or HD140 gearbox oil before first use.
Some of our items cannot be facilitated for pickups. This is because our items are located in different dispatch centres around the country and are shipped directly from these centres to our customers.
Items can be freighted at buyer's expense. Please specify when purchasing if you require quote on freight. Please provide (post code and suburb) so quote can be done or free pick up is offered.
Please ensure contact/payment within 3 days of purchase. If paying into my account or paypal, item will not be released till payment clears. Otherwise pick up within 7 days.
RETURNS
We accept returns. You may return an item for a refund within 30 days of delivery; all you need to do is ship the item back to us. We also charge a 10% restocking fee. Return credits will be issued once the item is received and inspected.
Return Eligibility: Items must be in new condition and in the original packaging to qualify for a refund (please do not assemble or modify the product in any way).
Please do not return or post items before obtaining instructions from Customer Service. Please note that you must comply with all return instructions provided to you via phone or your registered email address. All returns must be directed through Customer Service. If you do without instructions, there is a risk that your returned item may not be identifiable and your returns may not be accepted.
When a return is authorised, it is the buyerβs responsibility to ensure the product is packaged securely to prevent any damage during the return process. Failure to do so may affect the ultimate resolution to be offered, which may include repairs, replacement items or store credit at our discretion.
Applicable freight fees plus a 10% restocking fee will be deducted from your refund in cases where you have changed your mind and wish to return your product. This also applies to orders cancelled while in transit.
- Date Listed:28/09/2023
- Last Edited:28/09/2023
- Condition:New
- Shipping:Pickup Only
Similar Ads
- TWM Millers Falls Steel Carry All 1200mm x 929mm 1000kg CapacityINTEREST FREE FINANCE AVAILABLE! The FICA1200S Millers Falls 1000kg Carry All platform will allow you to get all your gear to where it's needed on the farm quickly and easily or just take the family for a ride. Featuring a cat 1 3 point linkage setup, the FICA1200S Millers Falls 1000kg Carry All platform will connect quickly and easily to most tractors. With its solid checkerplate steel tray on the sturdy steel frame this beauty will easily carry any load that you need it to. Its solid powd$455SHIPPING OFFEREDTottenham, VICβ’8w
- 1200LB Hand Cable Winch Boat Trailer Auto Towing Truck Marine Steel1200 pounds load capacity Hook is 3-1/2" long with 3/4" opening Gear Ratio 4:1 10 meter length of wire 3-1/2" x 5-1/2" base size Cable diameter: 4.6mm Ideal for moving and pulling loads and have many uses in DIY, leisure and light commercial applications. Heavy gauge zinc plated steel frame Adapts for ratcheting on free spooling Harden steel gears strong aircraft cable Conveniently drilled holes in base allow easy mounting, 3-1/2" x 5-1/2" base size -Easy Care Hardware- Open h$33Clayton South, VICβ’165w
- Millers Falls 550W Electric Cement Mixer 120L Drum Volume Tradies DIYINTEREST FREE FINANCE AVAILABLE! Need Small Quantities Of Concrete Or Mortar And Don't Have Time To Mix It By Hand or Wait For A Delivery? The Millers Falls CM125B 550W Electric Portable 120 Litre (4.4 cubic ft) Cement Mixer could be the solution that you've been looking for. The CM125B mixer is suitable for the tradesman, handyman and DIY enthusiast. Designed and built with convenience, durability and reliability in mind, this quality, portable mixer will produce a consistent, stable mix e$463SHIPPING OFFEREDTottenham, VICβ’94w
- 2.5 kg Welding Rod Electrode 2.5 x 350 mm(120pcs) 3.2 x 350 mm (78pcs)Welding rod 2.5x350mm 2.5kg (120pcs) 3.2x350mm 2.5kg (78 pcs) -Suitable for crack-resistant joint weld on mild to higher carbon steels. -The double coating provides stable arc characteristics with excellent all-position weld-ability. -Low spatter easy slag detachment and regular bead appearance. -COD tested for offshore applications. Diameter: 2.5mm / 3.2mm Length: 350mm 2.5kg sticks per pack Industrial Quality -Open hour- 9:00am to 3:30pm Mon-Fri other time is available. Direct import, buy$10Clayton South, VICβ’87w
- Giantz High Pressure Water Pump Multi Stage Garden Farm Rain!ππππππ ππππ πππ π ππππππππ! β π ππ, ππππ ππ πππππππππ β π¦πππππ πππ ππ ππππ¦ βπππππππππ πππππβ πππππ ππππππππ π πππππππππ πππππππππ π₯π΅πΆ π·π°πͺπ²πΌπ· π¨π½π¨π°π³π¨π©π³π¬π₯ β‘ππππππππ & πππππππ ππππππππβ‘ π³ππππππ πππ πππ πππππππ π πππ£ππ‘πππ¨ πππ¦ ππ₯πππππππ :) This item comes with a one year warranty and is delivered to your door π If you'$179SHIPPING OFFEREDMelbourne CBD, VICβ’31w
- 1 x 10" Hand Trolley Wheel wheels 3.50-4 Solid Heavy Duty No Air1 x 10" REPLACEMENT SOLID TROLLEY WHEEL Long Lasting, no need to pump air and Super Heavy Duty SPECIFICATIONS FOR THIS QUALITY WHEEL: β’Light Weight of wheel 1.5KG Each β’10" Single Hub solid wheel (max 135KG Load each) β’3.5" tyre width β’No Tube, don't need to pump air β’4" steel rim β’2 wheel bearing per wheel to fit 16mm axle β’Ideal for hand trolley, cart etc Open hour 9:00am to 3:30pm Mon-Fri other time is available. Direct import, buy on rig$17Clayton South, VICβ’408w
- 12 pcs Engine Oil Pressure Tester Kit 0-140 PSI Car Truck Test GaugeThe material of the engine oil pressure tester kit includes copper, rubber, ABS plastic, iron, and aluminum. Brass quick connector, high hardness, no rust, durable, good air tightness. The oil pressure tester kit is used to diagnose and test the oil pressure value to check whether it is normal. Prevent engine failure due to lack of oil. The oil pressure gauge uses a large 3" dial with a clear dual scale range 0 to 140 PSI and 0 to 10 bar, easy to read with a short range of about 1-2 bar compa$30Clayton South, VICβ’8w
- 14G x 50mm 75mm 100mm 150 Type 17 Bugle Head Batten Screw 1000pcsType 17 Bugle Head Batten Screws CLASS 3 MECHANICAL GALVANISED Quantitiy 1000pcs 14G-10x50mm: $65 (NO STOCK) 14G-10x75mm: $85 14G-10x100mm: $105 125mm : $160 150mm : $210 One Hex head Adaptor Bit included for each order. Open hour 9:00am to 5:00pm Mon-Fri other time is available. Direct import, buy on right price. Combine postage is available . Anything can fit in 3 KG satchel (40x30cm) will be $12.5 and 5 KG satchel (50x43cm) will be $17.5 australiawide. Standard australian post Satchel.$65Clayton South, VICβ’408w
- Plasterboard Collated Screw ZipStrip Fine Thread 25mm 10000 screwTRADE QUALITY Collated Drywall Plasterboard Screws Yellow Zinc Size 6G x 25mm Quantity: 50 pieces x 20 strips x 10 boxes = 10,000 screws. Less Jams-Less Wastage-Less Downtime Suits all screwguns, can bring your own gun to try if you want. For fixing plasterboard to timber or light guage metal sections Deep Phillips No. 2 Recess Twinfast 2A Thread Needle Point Fine Thread Made in Taiwan Open hour 9:00am to 3:30pm Mon-Fri other time is available. Direct impor$90Clayton South, VICβ’408w
- Swing Up 6" Solid Rubber Jockey Wheel Two Hole 750LB 340KG New!!Swing-Up 6" Solid Jockey Wheel 6" Solid Rubber Wheel Quick Release Swing Up Bracket with locking pin Zinc Plate Can be welded or easy Bolted to Trailer Plate size : ~120mm x 220mm Distance between 2 screw hole: 18.5cm Load Capacity: 750 lbs / 340KG 270mm fully extension item weight ~ 5.8KG Open hour 9:00am to 3:30pm Mon-Fri other time is available. Direct import, buy on right price. Combine postage is available . Anything can fit in 3 K$135Clayton South, VICβ’408w
- ROTARY TABLE Hori. Vert . Milling Machine 4-T Slot 200mm 8 Part SHV8 CSTRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : ROTARY TABLE Horizontal Vertical Milling Machine 4-T Slot 200mm 8β Part No.: SHV8 Code No. 4 Code No : 4 Part No : SHV8 Shipping weight & size : 30 kgs & 42*38*18 cm Description: This dual position (Horizontal/Vertical) rotary table is simple to operate and allows easy work handling that is ideal for indexing, circular cuttin$645SHIPPING OFFEREDDandenong South, VICβ’14h
- KEYLESS DRILL CHUCK 0-13mm METEX ISO30 Lathe Milling Part ISO3013 C 4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : KEYLESS DRILL CHUCK 0-13mm METEX ISO30 Lathe Milling Part No : ISO3013 Code No. 4 Code No : 4 Part No : ISO3013 Shipping weight & size : 3 kgs & 20*15*9 cm Description: The METEX Industrial grade keyless drill chuck is excellent for quick changes of bits. Knurled grips and exceptional accuracy make these chucks an indispens$200SHIPPING OFFEREDDandenong South, VICβ’16h
- KEYLESS DRILL CHUCK 0-13mm METEX ISO40 Lathe Milling Part ISO4013 C 4STRUTFIT PTY LTD - Tel. No.: 03 - *****8322 Address : Unit 4, 6 Fowler Road, Dandenong South, Vic 3175 Website : strutfit.com.au Email : KEYLESS DRILL CHUCK 0-13mm METEX ISO40 Lathe Milling Part No : ISO4013 Code No. 4 Code No : 4 Part No : ISO4013 Shipping weight & size : 4 kgs & 20*15*9 cm Description: The METEX Industrial grade keyless drill chuck is excellent for quick changes of bits. Knurled grips and exceptional accuracy make these chucks an indispensa$225SHIPPING OFFEREDDandenong South, VICβ’17h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 8322