8185 views
GOLD MINE FNQ
$550,000 Negotiable
Our mining outfit and lease is a great opportunity to get a start or to expand in the gold mining industry.
With the sale, access to any prospective Alluvial and Hardrock mining leases within any EPM with our sister company Hardrock Minerals Exploration, will be available to the miner to expand there operations.
Details will be discussed further upon the sale.
Proven traces of Gold in Alluvial gravels outlined within EPM 27773. This area provides great position for Alluvial Mining within close proximity of current mine site.
Mining Lease and EPM's area available for Alluvial and Hardrock mining. Gold purity has been tested, results between 96.5 – 97.5% consistently.
From past exploration reports on the current ML20657 gold grade is estimated to be 1 gram per 6.1 cubic meters of loose material. 189m3:1 troy ounce and estimated 50,000m3 of material in the creek and 50,000m3 of terrace material. This results in about 530 oz of gold at $3000 troy ounce.
GPS locations and photographs taken of pans in the area of interest to a untouched system just 5klm south of the working mine sites. Estimated a minimum of 150,000m3 of mineable loose gravels at grades of 150m3-180m3 :1oz.
Sale of equipment comes with the lease.
Shaker Plant hydraulic driven with 12mm screen
6-inch water supply – high pressure spray bars – filter system with manifold to regulate water
3.8 metre sluice with hydraulic riffles and expander mesh
42.5m3 per/hr feed rate as an average
Cat 330C excavator - Hitachi dump truck AH400 - Kawasaki 115 wheel loader - Mack twin steer flat bed truck - Water pump 5 - 6 inch 100hp southern cross - multiple 2 inch water pumps
Mobile Workshop - Hydraulic hose crimper, dies and crimping chart
Assortment of Hydraulic fittings
Pre-made hydraulic hoses and spare hose of different sizes
Grab kits – bolts, O-ring’s, Seals, grease nipples, Hydraulic caps and plugs, hose clamps
Fabricating equipment – Mig/Stick welders, Rods and wire, Oxy/Gas cutting and heating
Genset and Air compressor with air hoses
Oils – Engine, Hydraulic, Transmission and Gear oil
Rubber support lining for screens on shaker plant/ spare screens/ spray bars and nozzles
300m 2’ lay-flat couplings and clamps
60m 4’ suction hose with couplings and foot-valve
Steel – pipe, flat bar, RHS, SSH, sheet, expander mesh, galvanised pipe fittings
20ltr Grease with pump
Hydraulic 4 Ton Crane fitted to flatbed tray
4500, 9000 and 600 litre fuel tanks
Transfer fuel pump and hose’s
Contact us for more detailed information.
With the sale, access to any prospective Alluvial and Hardrock mining leases within any EPM with our sister company Hardrock Minerals Exploration, will be available to the miner to expand there operations.
Details will be discussed further upon the sale.
Proven traces of Gold in Alluvial gravels outlined within EPM 27773. This area provides great position for Alluvial Mining within close proximity of current mine site.
Mining Lease and EPM's area available for Alluvial and Hardrock mining. Gold purity has been tested, results between 96.5 – 97.5% consistently.
From past exploration reports on the current ML20657 gold grade is estimated to be 1 gram per 6.1 cubic meters of loose material. 189m3:1 troy ounce and estimated 50,000m3 of material in the creek and 50,000m3 of terrace material. This results in about 530 oz of gold at $3000 troy ounce.
GPS locations and photographs taken of pans in the area of interest to a untouched system just 5klm south of the working mine sites. Estimated a minimum of 150,000m3 of mineable loose gravels at grades of 150m3-180m3 :1oz.
Sale of equipment comes with the lease.
Shaker Plant hydraulic driven with 12mm screen
6-inch water supply – high pressure spray bars – filter system with manifold to regulate water
3.8 metre sluice with hydraulic riffles and expander mesh
42.5m3 per/hr feed rate as an average
Cat 330C excavator - Hitachi dump truck AH400 - Kawasaki 115 wheel loader - Mack twin steer flat bed truck - Water pump 5 - 6 inch 100hp southern cross - multiple 2 inch water pumps
Mobile Workshop - Hydraulic hose crimper, dies and crimping chart
Assortment of Hydraulic fittings
Pre-made hydraulic hoses and spare hose of different sizes
Grab kits – bolts, O-ring’s, Seals, grease nipples, Hydraulic caps and plugs, hose clamps
Fabricating equipment – Mig/Stick welders, Rods and wire, Oxy/Gas cutting and heating
Genset and Air compressor with air hoses
Oils – Engine, Hydraulic, Transmission and Gear oil
Rubber support lining for screens on shaker plant/ spare screens/ spray bars and nozzles
300m 2’ lay-flat couplings and clamps
60m 4’ suction hose with couplings and foot-valve
Steel – pipe, flat bar, RHS, SSH, sheet, expander mesh, galvanised pipe fittings
20ltr Grease with pump
Hydraulic 4 Ton Crane fitted to flatbed tray
4500, 9000 and 600 litre fuel tanks
Transfer fuel pump and hose’s
Contact us for more detailed information.
- Date Listed:04/01/2024
- Last Edited:20/03/2024
- Business Type:Other
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 6892