59 views
Hervey Bay Structural Hardwood Timber GOS and Framing
$3.01
SHIPPING OFFERED
F14, F17, F22 and F27 – Structural Grades and Appearance Grades. We’d like to think that the traditional F14 grade is mainly for the rural scene but in saying that, most draftsmen / architects still to this day tend to specify F14. Normally we would advise F17 for most structural projects where “visual” is becoming a bigger issue nowadays.
Most external decks fail prematurely from the sub floor bearers / joists falling apart. Old style 38mm and 50mm bearers split and allow the water into them from having too many nails and screws belted into them. We produce a range of bearers that are 60mm and 92mm wide which will give you more width to screw your decking / flooring to and effectively eliminate completely the age-old problem of rotting splitting bearers. The wider floor joist spacing then suits our large range of heavy duty decking which comes in 20mm, 22mm, 24mm and 27mm thick.
AS WE ARE A PRODUCTION SAWMILL, ALL PRODUCT MUST BE ORDERED IN ADVANCE.
GREEN OFF SAW HARDWOOD – SOME SIZES INCLUDE:
080x027 F14 grade = $2.85 per Lm
092x027 F14 grade = $3.23 per Lm
106x027 F14 grade = $3.75 per Lm
106x038 F14 grade = $5.18 per Lm
106x060 F14 grade = $10.00 per Lm
106x092 F14 grade = $19.07 per Lm
106x106 F14 grade = $25.49 per Lm
131x027 F14 grade = $4.53 per Lm
131x060 F14 grade = $12.34 per Lm
131x075 F14 grade = $22.30 per Lm
156x027 F14 grade = $5.76 per Lm
156x038 F14 grade = $8.10 per Lm
156x060 F14 grade = $14.69 per Lm
156x075 F14 grade = $26.62 per Lm
156x092 F14 grade = $32.77 per Lm
Other sizes available. You can order your timber direct from the sawmill. When we quote, we can include different size options, species and grades. All Hardwood Timber is produced on site in our own Sawmill. No three-month-old shrunk bent rack stock like you’ve been getting from the hardware stores.
You can pick up yourself or we can deliver. Thanks for your time and interest. Please call 07******1008 anytime. Price is per LM plus GST. For orders less than $400.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to Caboolture, Morayfield, Narangba, North Lakes, Chermside, Kedron, Bowen Hills, Wooloowin, Spring Hill, Holland Park, Mt Gravatt, Donnybrook, Toorbul, Ningi, Sandstone Point, Bribie Island, Brisbane Northside and all Southside surrounding suburbs.
West to Darra, Ipswich, Rosewood, Willowbank. Due to increased traffic in the Brisbane metro area, delivery times will be approximate. Or pickup at the Sawmill Monday to Saturday.
The design of your structure plays a big part in the timber’s ability to endure. Reducing the direct weather, the harsh western sun and even pot plants on decks with water leaking from them can have a major effect on your timber’s performance. Our 60mm and 92mm floor joists are far more durable than the old style 50mm ones. Belting 1000 nails into 50mm FJ’s only splits them from one end to the other. Not many “engineered” wood products will outlast solid Hardwood. Our sawmill building has been around since 1910, is built from local hardwood and has never been painted.
The building has no walls on it and the rain blows through from one side to the other. Believe it or not, solid hardwood is in fact solid hardwood and is not made up of glue, plastic and pine fibre. We all can appreciate that glue and plastic may last a while but the other stuff they might be mixing with it is a bit dodgy. Some overhead cover, roof overhang or protective oiling may well extend the life of most Australian Hardwood indefinitely.
Most external decks fail prematurely from the sub floor bearers / joists falling apart. Old style 38mm and 50mm bearers split and allow the water into them from having too many nails and screws belted into them. We produce a range of bearers that are 60mm and 92mm wide which will give you more width to screw your decking / flooring to and effectively eliminate completely the age-old problem of rotting splitting bearers. The wider floor joist spacing then suits our large range of heavy duty decking which comes in 20mm, 22mm, 24mm and 27mm thick.
AS WE ARE A PRODUCTION SAWMILL, ALL PRODUCT MUST BE ORDERED IN ADVANCE.
GREEN OFF SAW HARDWOOD – SOME SIZES INCLUDE:
080x027 F14 grade = $2.85 per Lm
092x027 F14 grade = $3.23 per Lm
106x027 F14 grade = $3.75 per Lm
106x038 F14 grade = $5.18 per Lm
106x060 F14 grade = $10.00 per Lm
106x092 F14 grade = $19.07 per Lm
106x106 F14 grade = $25.49 per Lm
131x027 F14 grade = $4.53 per Lm
131x060 F14 grade = $12.34 per Lm
131x075 F14 grade = $22.30 per Lm
156x027 F14 grade = $5.76 per Lm
156x038 F14 grade = $8.10 per Lm
156x060 F14 grade = $14.69 per Lm
156x075 F14 grade = $26.62 per Lm
156x092 F14 grade = $32.77 per Lm
Other sizes available. You can order your timber direct from the sawmill. When we quote, we can include different size options, species and grades. All Hardwood Timber is produced on site in our own Sawmill. No three-month-old shrunk bent rack stock like you’ve been getting from the hardware stores.
You can pick up yourself or we can deliver. Thanks for your time and interest. Please call 07******1008 anytime. Price is per LM plus GST. For orders less than $400.00 exclusive of GST, price will increase slightly.
To see all of our products: https://photos.app.goo.gl/M5qaJr4WgM8EvRGv9
Our sawmill is in Woodford (4514) and we deliver by crane truck to Caboolture, Morayfield, Narangba, North Lakes, Chermside, Kedron, Bowen Hills, Wooloowin, Spring Hill, Holland Park, Mt Gravatt, Donnybrook, Toorbul, Ningi, Sandstone Point, Bribie Island, Brisbane Northside and all Southside surrounding suburbs.
West to Darra, Ipswich, Rosewood, Willowbank. Due to increased traffic in the Brisbane metro area, delivery times will be approximate. Or pickup at the Sawmill Monday to Saturday.
The design of your structure plays a big part in the timber’s ability to endure. Reducing the direct weather, the harsh western sun and even pot plants on decks with water leaking from them can have a major effect on your timber’s performance. Our 60mm and 92mm floor joists are far more durable than the old style 50mm ones. Belting 1000 nails into 50mm FJ’s only splits them from one end to the other. Not many “engineered” wood products will outlast solid Hardwood. Our sawmill building has been around since 1910, is built from local hardwood and has never been painted.
The building has no walls on it and the rain blows through from one side to the other. Believe it or not, solid hardwood is in fact solid hardwood and is not made up of glue, plastic and pine fibre. We all can appreciate that glue and plastic may last a while but the other stuff they might be mixing with it is a bit dodgy. Some overhead cover, roof overhang or protective oiling may well extend the life of most Australian Hardwood indefinitely.
- Date Listed:09/04/2024
- Last Edited:09/04/2024
- Condition:New
- Shipping:Shipping & Pickup
Similar Ads
- Treated hardwood round stumps / posts / logs (4 x available)MINIMUM PURCHASE of 2, prices and approx lengths below: 70cm long $15 67cm long $15 93cm long $15 70cm long $15 All range from 19cm to around 26cm in width. All unused, have just been sitting. Pick up Craignish, Hervey Bay.$15Craignish, QLD•299w
- CLIPSAL 1920MB3,CD HERITAGE 3 GANG TIMBER MOUNTING BLOCK CEDAR FINISHCLIPSAL HERITAGE 3 GANG TIMBER MOUNTING BLOCK 1920MB3,CD CEDAR FINISH Size: 90 x 225mm Barcode: 9311554187798 Cat No: 1920MB3,CD As new in original unopened pack as shown. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND F.O.B. FOR $11 EXTRA WITHIN AUSTRALIA, CLIPSAL 1923MB3,CD HERITAGE 3 GANG TIMBER MOUNTING BLOCK CEDAR FINISH - This Clipsal timber mounting block is an essential accessory for any electrical installation project. The 3-gang mounting block is suitable for use with Clipsal's Herita$12SHIPPING OFFEREDNegotiableUrangan, QLD•79w
- DIGITOR ATCO ISOLATING STEPDOWN TRANSFORMER 240V TO 115V 250VADIGITOR ATCO ISOLATING STEPDOWN TRANSFORMER 240V TO 115V 250VA Originally a Dick Smith Electronics Item. Very high quality unit - uses Australian made and approved ATCO brand Isolation transformer, so you know it will be approved to Australian standards and be safe, unlike some of the cheaper imports. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND FOR $22 EXTRA WITHIN AUSTRALIA$65SHIPPING OFFEREDNegotiableUrangan, QLD•113w
- CONCRETE SCREW BOLTS 12 X 150MM QTY 30CONCRETE SCREW BOLTS 12 X 150MM QTY 30 As new in original bag, leftover from project PICKUP FROM HERVEY BAY, QLD 4655 OR CAN POST FOR $19 EXTRA WITHIN AUSTRALIA$70SHIPPING OFFEREDNegotiableUrangan, QLD•113w
- MiTek RN 6P Hot dip Galvanized reinforced head nails 30x2.3mm 200pkMiTek RN 6P Hot dipped Galvanized, reinforced head nails 30x2.3mm pack 200 As new, never opened or used. Price shown is per bag, 8 bags available total. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND FOR $12 EXTRA$12.50SHIPPING OFFEREDNegotiableUrangan, QLD•114w
- SPLASH POOL ACCESSORIES - SINGLE AIR SWITCH (COMPLETE UNIT) 240V 10ASPLASH POOL ACCESSORIES - SINGLE AIR SWITCH (COMPLETE UNIT) 240V 10A CAPACITY Fully working and in good condition. Great for use around pools, spas, anywhere wet that would be a safety hazard with normal switches. Also these are used in shielded rooms for test and measurement where mains interference cannot be allowed in the room. Note, the control box must be located safely away from water as per the regulations. PICKUP FROM HERVEY BAY, QLD 4655 OR CAN SEND WITHIN AUSTRALIA FOR $11$89SHIPPING OFFEREDNegotiableUrangan, QLD•146w
- CLIPSAL 435 SERIES 240V 10A AC INLET 240V 10A (For AMI G Jukebox)CLIPSAL 435 SERIES 240V 10A AC INLET 240V 10A (For AMI Model G Jukebox) These are New, unused and genuine Clipsal part made to Australian standards. These will also accept newer style extension cord sockets that have the protective ring moulded around the end. Purchased a quantity for a project and have some left over. Quantity available, PRICE SHOWN IS FOR ONE UNIT Pickup from Hervey Bay, QLD 4655 or can send for $9.50 within Australia for quantity 1 - 6 sent together.$13SHIPPING OFFEREDNegotiableUrangan, QLD•117w
- CLIPSAL STARSERVE BRACKET FOR LITE ENCLOSURE MODEL 8000LENBRCLIPSAL STARSERVE BRACKET FOR LITE ENCLOSURE MODEL 8000LENBR BARCODE: 9311554623418 Brand new in original packaging with instruction sheet. Box only opened to take photo of item so you can confirm its correct and what you need. Pickup from Hervey Bay, QLD 4655 or can send F.O.B. for $12 extra within Australia The CLIPSAL 8000LENBR STARSERVE BRACKET FOR LITE ENCLOSURE is a top-quality electrical accessory perfect for your home or DIY project. Designed with Clipsal's renowned expertise, this br$29SHIPPING OFFEREDNegotiableUrangan, QLD•117w
- ZENITH ANGLE BRACKETS, SHELVING BRACKETS, 150 X 125mm *NEW*ZENITH ANGLE BRACKETS, SHELVING BRACKETS, 150 X 125MM LIGHT DUTY WITH SCREWS. *NEW* New in original packaging as shown. Includes screws, and instructions are on the back. Pickup from Hervey Bay, QLD 4655 or can post for $11 extra including tracking to anywhere in Australia.$8SHIPPING OFFEREDNegotiableUrangan, QLD•114w
- CLIPSAL 240-200 SERIES DEEP JUNCTION BOX 3 WAYCLIPSAL SERIES 435 POWER INLET 240V 10A Genuine Clipsal part, NEW, UNUSED Purchased a quantity for a project and have some left over. Quantity available, PRICE SHOWN IS FOR ONE UNIT Pickup from Hervey Bay, QLD 4655 or can send for $11 within Australia for quantity 1 - 5 sent together.$8SHIPPING OFFEREDNegotiableUrangan, QLD•117w
- Sunshine Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDMaroochydore, QLD•2d
- Gold Coast Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBundall, QLD•2d
- Brisbane Blackbutt Decking Panel Shiplap and Stair TreadsOur Blackbutt Standard Better Grade Decking is wider than most and it's thicker. Bigger is better because your square meter coverage costs are lower. We mill our own feed stock timber in our own sawmill to a thicker wider profile to supply our own dry mill with a bigger board so that we can machine our decking to a thicker wider profile. The result is a far superior product for outdoor use high load decks. Thicker means stronger and more durable. In fact, our boards are 15% to 25% larger by vol$3.18SHIPPING OFFEREDBrisbane City, QLD•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 1008