2 Results: New & Used in Brakes & Suspension in Erina 2250, NSW

Toyota 2021 V8 70 Series (Troop Carrier) factory original Shock Absorbers These were on the car for its boat trip from the factory in Japan to ARB where I replaced them with a GVM upgrade They have done somewhere around 17klm in total travel so basically unused as can be seen in the photos

Selling front suspension setup to suit HONDA EG EK DC2 with HARDRACE bushings. I cleaned up all the arms, painted them in VHT epoxy single stage black paint. The bushings were on my car for < than 1 month, they are in near new condition, still got plenty of life in them. HARDRACE hardend rubber front compliance bush - $75 Front shock forks suit EG/DC2 - $75 Front complete lower arms with HARDRACE hardened rubber bush - $300 or the whole lot for $400 Can post australia wide @ buyer's exp

for sale: Carbing front strut brace, Strut bar type I suits Honda EG EK DC2. material: steel colour: powder coated White Bar is in used condition, examine all photos carefully there are some scratches on the finish. The bar itself is still strong and will reduce chassis flex. Can post Australia wide @ buyer's expense or pick-up from Terrigal, NSW, 2260

For sale Carbing rear strut brace, strut bar type I suits Honda EG EK DC2 Material: Steel Color: powder coated White Bar is in used condition, examine all photos carefully there are some scratches on the finish. The bar itself is still strong and will reduce chassis flex. Can post Australia wide @ buyer's expense or pick-up from Terrigal, NSW, 2260

Jdm dc2 98spec type-r 25mm front sway bar for sale Comes with Hardrace endlinks, Hardrace bushing and stock D-bracket. This will fit on any 90's honda EG/EK/DC2 so long as your using an EG/DC front subframe and lower control arms. I painted the bar in 3 stages with some etch primer, blue enamel paint and matte clear. There's a few niks and scratches in the finish its not powdercoat. Can post australia wide @ buyer's expense or pick-up 2260, Terrigal, NSW

https://au.gktech.com/products/rear-subframe-slip-in-collars For sale GKTECH Rear Subframe slip-in Collars S13,180sx,S14,S15,R32,R33,R34,Z32 Brand new in box Can post australia wide @ buyer's expense or pick-up 2260,Terrigal,NSW

https://au.gktech.com/products/s13-180sx-brake-master-cylinder-stopper For sale GKTECH s13/180sx brake master cylinder stopped - RHD Brand new never used Pick-up from 2260, Terrigal, NSW or can post australia wide at buyer's expense

https://au.gktech.com/products/s13-180sx-handbrake-extenders For sale GKtech s13/180sx handbrake extenders Brand new unopened Can post australia wide @ buyer's expense or pick-up 2260, Terrigal, NSW

selling Ford Falcon FG xr6T front sway bar with endlinks, bushes and brackets Removed these from my wrecked 2012 FG turbo ute The bar itself is a little rusted up, could use a clean up and some spray paint. Included with sale are the endlinks, bushings and brackets. The endlinks and bushes still have life in them. Can post australia wide at buyer's expense or pick-up from 2260, NSW, Terrigal

up for sale Ford Falcon FG xr6 Turbo brake booster and master cylinder Removed from my wrecked 2012 FG mk2 xr6 turbo ute Parts were in good working order Can separate or sell both Booster - $75 Master cylinder - $75 Can post australia wide @ buyer's expense or pick-up 2260, NSW, Terrigal