742 views
8x5 HEAVY DUTY HOT DIPPED GALVANISED HYDRAULIC TIPPING 400mm HIGH SIDED BOX TRAILER
$6,000
8x5 HEAVY DUTY HOT DIPPED GALVANISED SINGLE AXLE HYDRAULIC TIPPING 400mm HIGH SIDED BOX TRAILER 1600kg GVM
Features:
• ATM 1600KG
• Free 8” Jockey Wheel
• Optional Cage With New Plug in Design (Steady and Easy to Remove)
• 4 Stage 3000kg Hydraulic Ram
• Remote Controller and Battery are Included in the Front Tool Box
• 4 Tie Down Rails are Welded All The Way Around
• Front and Rear Tailgates That Can Be Easily Removed
• Extended Foot Step for Jerry Can Hold
• Fully Welded Body
• Reinforced Chassis & Hinges
• Greasable Suspension
Specifications:
ATM 1600kg
Internal Size 2430x1520mm
External Size 4380x2050mm
Drawbar 1800mm 100x50x3.0mm Tube
Upper Chassis Frame 70x50x3.0mm Tube
Lower Chassis Frame 70x50x3.0mm Tube
Hydraulic Ram 4 Stages
Finish Hot Dipped Galvanized (Rust free)
Side 400mm High (One Piece of Checker Plate Fold Up)
Floor 2.5mm 2 Piece of Fully Welded Checker Plate
Cage 600mm/900mm Optional Cage (Plug In Design)
Jockey Wheel 8" Steel Rim Swing up
Tyre Brand New 15" 195/R15LT Light Truck
Wheel Sun raysia Style with 6 Studs Pattern
Axle 50x50mm Square Solid
Spring Heavy Duty 7 Leaf Eye to Eye Spring With Greasable Shackle
Coupling 50mm ADR Approved Australia Standard with Grease Nipples
Trailer plug Round or Flat 7 Pin Plug
Brake Mechanical Disc Brake With Parallel Bearings
Safety Chain 10mm
Light LED Set
Features:
• ATM 1600KG
• Free 8” Jockey Wheel
• Optional Cage With New Plug in Design (Steady and Easy to Remove)
• 4 Stage 3000kg Hydraulic Ram
• Remote Controller and Battery are Included in the Front Tool Box
• 4 Tie Down Rails are Welded All The Way Around
• Front and Rear Tailgates That Can Be Easily Removed
• Extended Foot Step for Jerry Can Hold
• Fully Welded Body
• Reinforced Chassis & Hinges
• Greasable Suspension
Specifications:
ATM 1600kg
Internal Size 2430x1520mm
External Size 4380x2050mm
Drawbar 1800mm 100x50x3.0mm Tube
Upper Chassis Frame 70x50x3.0mm Tube
Lower Chassis Frame 70x50x3.0mm Tube
Hydraulic Ram 4 Stages
Finish Hot Dipped Galvanized (Rust free)
Side 400mm High (One Piece of Checker Plate Fold Up)
Floor 2.5mm 2 Piece of Fully Welded Checker Plate
Cage 600mm/900mm Optional Cage (Plug In Design)
Jockey Wheel 8" Steel Rim Swing up
Tyre Brand New 15" 195/R15LT Light Truck
Wheel Sun raysia Style with 6 Studs Pattern
Axle 50x50mm Square Solid
Spring Heavy Duty 7 Leaf Eye to Eye Spring With Greasable Shackle
Coupling 50mm ADR Approved Australia Standard with Grease Nipples
Trailer plug Round or Flat 7 Pin Plug
Brake Mechanical Disc Brake With Parallel Bearings
Safety Chain 10mm
Light LED Set
- Date Listed:10 hours ago
- Last Edited:10 hours ago
- Listing Type:Dealer new
Similar Ads
- Variant 2715 T2 Tipper TrailerIn Stock, Ready To Go - A2B Trailers Central Coast Variant 2715 T2 2700kg Tipper Trailer SPECS: 2700kg ATM 2080kg Payload 620kg Tare 2.54m x 1.45m Load Area 350mm Aluminium Removable Drop Sides (Use as a flatbed) Electric Hydraulic Tipper Lightweight Design Fully Hot-Dipped Galvanised Heavy Duty KNOTT Jockey Wheel Heavy Duty KNOTT Cast Coupling Trailer $12,644 inc GST Optional Extras 600mm Cage Side Kit: $1,487 inc GST Spare Wheel & Bracket (Mounted): $331 inc GST Rear Drop S$12,300 Excl. Gov. ChargesErina, NSW•69w
- Variant 205 S1 With Tilt Small Box Trailer - 750kg 7x4 2023The Variant 205 S1 With Tilt is one of the lightest small box trailers on the market, at only 116kg tare, this trailer offers a huge 634kg payload capacity. Perfect for camping, bikes, gardening and odd jobs. The trailer features a fully galvanised chassis, body and frame with a durable phenolic ply floor. This helps to reduce the weight of the trailer whilst keeping its strength. The 205 S1 With Tilt is unbraked and has an overall ATM of 750kg which allows it to be towed by most small ca$2,490 Excl. Gov. ChargesErina, NSW•66w
- High sided box trailerCustom built (although not by me) high sided galvanized steel trailer, built on a box trailer base. Base has rust damage. Unregistered. Brake lights, left and right indicator and number plate lights working. Tyres good condition plus one spare (with some cracks but holds pressure). Things in the trailer are just stored there temporarily. 340kg tare, 6AFT20000Y2000742, Built 2000-08. Outside of box measures 214cm long x 130cm wide x 160cm high Price reduced as I need the car space back that it$240NegotiableEmpire Bay, NSW•11w
- 2023 Variant 205 S1 Small Box Trailer with High Tarp KitThe Variant 205 S1 With Tilt is one of the lightest small box trailers on the market, at only 116kg tare, this trailer offers a huge 634kg payload capacity. Perfect for camping, bikes, gardening and odd jobs. The trailer features a fully galvanised chassis, body and frame with a durable phenolic ply floor. This helps to reduce the weight of the trailer whilst keeping its strength. The 205 S1 With Tilt is unbraked and has an overall ATM of 750kg which allows it to be towed by most small ca$2,935 Excl. Gov. ChargesErina, NSW•23w
- 8x6 Box Trailer- 8x6 Box Trailer - Foldable timber prong - Spare Tire - Heavy Duty Trailer Hitch Coupling Lock With Padlock - Jockey Wheel - Foldable Side and Back Gates$1,500NegotiableWamberal, NSW•3w
- REDUCED! Jockey wheel (AL-KO 8 inch)PRICE REDUCED!! AL-KO jockey wheel, 8 inch wheel heavy duty solid rubber tyre (no clamps- most trailers have welded camps anyway or you can buy bolt on clamps for about $20-25 at Supacheap Auto) Used, but in reasonable condition. 570mm height (closed ) cylinder shoulder to ground and has ~230mm travel These are usually around $180-230 ea A bit like this one https://www.thetrailershop.com.au/store/jockey-wheels-parts/jockey-wheels/al-ko-premium-8-jockey-wheel-with-3-bolt-centre-swivel-bracket/$30Point Frederick, NSW•12w
- 2023 Variant 205 s1 small box trailer with tilt & cage / plate sidesThe Variant 205 S1 With Tilt is one of the lightest small box trailers on the market, at only 116kg tare, this trailer offers a huge 634kg payload capacity. Perfect for camping, bikes, gardening and odd jobs. The trailer features a fully galvanised chassis, body and frame with a durable phenolic ply floor. This helps to reduce the weight of the trailer whilst keeping its strength. The 205 S1 With Tilt is unbraked and has an overall ATM of 750kg which allows it to be towed by most small ca$3,020 Excl. Gov. ChargesErina, NSW•23w
- Trailer 6x4 Camper/workI put together this 4x6ft (approx), galvanised steel trailer for a number of uses. When broken down to its simplest state it is ideal for working - tools, sand/cement bags, mulch, etc. I then built in the back cross bar which further assists trade use - timber lengths, sheets of material, et al. The tool box is firmly bolted to the front and stores a significant amount of gear. My next addition for an extensive trip with the family around Aus' was the Rhino basket and canvas covers. I loaded in$2,400NegotiableKillcare, NSW•6w
- Heavy Box TrailerRusty, heavy, steel, unregistered, over built, box trailer. W: 1087 H: 1000 L:3060. Flat connector. Side boxes. Plenty of life left.$450Lisarow, NSW•2w
- Box trailer hitchBox trailer hitch rated 2000kg 50MM tow ball size$20NegotiableWyoming, NSW•19w
- 7x5 ENCLOSED SINGLE AXLE TRAILERWT-1 SINGLE AXLE BODY MATERIAL: 2.5mm MARINE GRADE ALUMINIUM X-PLATE (OPTIONAL UPGRADE TO FLAT PLATE) CHASSIS: HOT DIPPED GALVANISED AXLE: SOLID NON-BRAKED 750kg GVM (OPTIONAL EXTRA TO UPGRADE TO BRAKED AXLE 1400kg GVM) SPRINGS: SLIPPER BODY HEIGHT: 1150mm (OPTIONAL EXTRA TO INCREASE BODY HEIGHT TO 1500mm) WHEELS: NEW 14” RIMS WITH NEW TYRES DOORS: 2 SIDE DOORS (OPTIONAL EXTRA REAR DOOR) LADDER RACKS: 2 (OPTIONAL EXTRA 3rd ROOF RACK) DRAW BAR: 1200mm (OPTIONAL EXTRA INCREASE DRAW$5,494Erina, NSW•9h
- 10x6 HEAVY DUTY HOT DIPPED GALVANISED TANDEM AXLE HYDRAUILC TIPPING BOX TRAILER 3500kg GVM10x6 HEAVY DUTY HOT DIPPED GALVANISED TANDEM AXLE HYDRAULIC TIPPING BOX TRAILER 3500kg GVM Features: • ATM 3500KG • 450mm High Side • Barn Door Design • Free 8” Jockey Wheel • New Plug in Cage Design (Steady and Easy to Remove) • 4 Stage 3000kg Hydraulic Ram • Remote Controller and Battery are Included in the Front ToolBox • 4 Tie Down Rails are Welded All The Way Around • Front and Rear Tailgates That Can Be Easily Removed • Extended Foot Step for Jerry Can Hold • Fully Welded Body • Reinforc$9,700Erina, NSW•9h
- 8x5 ENCLOSED SINGLE AXLE TRAILERWT-1 SINGLE AXLE BODY MATERIAL: 2.5mm MARINE GRADE ALUMINIUM X-PLATE (OPTIONAL UPGRADE TO FLAT PLATE) CHASSIS: HOT DIPPED GALVANISED AXLE: SOLID NON-BRAKED 750kg GVM (OPTIONAL EXTRA TO UPGRADE TO BRAKED AXLE 1400kg GVM) SPRINGS: SLIPPER BODY HEIGHT: 1150mm (OPTIONAL EXTRA TO INCREASE BODY HEIGHT TO 1500mm) WHEELS: NEW 14” RIMS WITH NEW TYRES DOORS: 2 SIDE DOORS (OPTIONAL EXTRA REAR DOOR) LADDER RACKS: 2 (OPTIONAL EXTRA 3rd ROOF RACK) DRAW BAR: 1200mm (OPTIONAL EXTRA INCREASE DRAW$5,895Erina, NSW•9h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 5260
Trading hours:
- Sat: 09:00 AM to 01:30 PM