107 views
STARTER PLUS Pump - Aerated Worm Castings Tea OR Aerated Compost Tea
$65
STARTER PLUS Pump Empty Mini Tea Bag Tea Mini Guide
For brewing Aerated Worm Castings Tea OR Aerated Compost Tea
PICKUP From Collingwood Park 4301
Delivery available.
* Suits brews up to 15 litres volume (applied up to up to 1600 square metres as a foliar application)
* Make a proper tea with one cup of worm castings, that can be applied to up to 250 square metres of garden as a foliar application.
$65 - Just Pump ( $20 Shipping If Req'd)
$75 - 2L Castings & Pump Kit ( $20 Shipping If Req'd)
$90 - 8L Castings & Pump Kit ( $33.00 Shipping If Req'd)
$5 - 20 Litre bucket as a brewer - recovered from the waste stream (pickup only)
(*For shipping, supply your own bucket - buckets can not be shipped)
Make a proper tea with one cup of worm castings, that can be applied to up to 250 square metres of garden as a foliar application.
All Starter pumps contain: a two outlet aquarium air pump, air line, two air stones, one x Mini Tea Bag (empty, 1 cup size) & full written instructions.
Written Instructions Supplied !!
You get a printed copy of the Aerated Castings Tea Quick Start Instructions.
The instructions go into making Castings Water Extracts, Non-Aerated Castings Tea (NACT) & Aerated Castings Tea (ACT).
Of course you can make the same products from COMPOST instead of WORM CASTINGS.
It gives you step-by-step instructions to brew your first tea, including a handy reference chart for different sized brews, recipes & application rates/areas.
It teaches you about the simplest way to apply Worm Castings in a Water Extract - to the middle ground of Non-Aerated Castings Tea (you probably have everything you need to do NACT !) - to the most sophisticated option of Aerated Castings Tea !
(Pump & Aerator Kits sold separately.)
Aerated Castings Tea, Simply Put Is:
Basically, a small amount of castings is placed in a sock/strainer/stocking - usually about 1 to 2 cups of castings to 15 litres of water.
This is suspended in a bucket of non chlorinated water.
The water is then fed oxygen and stirred, usually by using an aquarium air pump and air stone.
This multiplies the good bacteria in the “brew” – the brew can then be watered down by 5 or 10 times before application, and a result still seen.
Why Make Aerated Castings Tea?
Basically, to make a LITTLE VC go a LONG way – also for ease of use in some applications.
One to two cups of VC may make up to 10 to 15 litres of liquid, which can then be diluted with water up to 5 or 10 times it’s volume to make application easier.
WORKSHOPS ALSO AVAILABLE - virtual/recorded option & Face-To-Face at Northey Street City Farm.
Please see my other ads for
Composting worms, bait worms, worm farms, vermicast/vermicompost/worm castings
For brewing Aerated Worm Castings Tea OR Aerated Compost Tea
PICKUP From Collingwood Park 4301
Delivery available.
* Suits brews up to 15 litres volume (applied up to up to 1600 square metres as a foliar application)
* Make a proper tea with one cup of worm castings, that can be applied to up to 250 square metres of garden as a foliar application.
$65 - Just Pump ( $20 Shipping If Req'd)
$75 - 2L Castings & Pump Kit ( $20 Shipping If Req'd)
$90 - 8L Castings & Pump Kit ( $33.00 Shipping If Req'd)
$5 - 20 Litre bucket as a brewer - recovered from the waste stream (pickup only)
(*For shipping, supply your own bucket - buckets can not be shipped)
Make a proper tea with one cup of worm castings, that can be applied to up to 250 square metres of garden as a foliar application.
All Starter pumps contain: a two outlet aquarium air pump, air line, two air stones, one x Mini Tea Bag (empty, 1 cup size) & full written instructions.
Written Instructions Supplied !!
You get a printed copy of the Aerated Castings Tea Quick Start Instructions.
The instructions go into making Castings Water Extracts, Non-Aerated Castings Tea (NACT) & Aerated Castings Tea (ACT).
Of course you can make the same products from COMPOST instead of WORM CASTINGS.
It gives you step-by-step instructions to brew your first tea, including a handy reference chart for different sized brews, recipes & application rates/areas.
It teaches you about the simplest way to apply Worm Castings in a Water Extract - to the middle ground of Non-Aerated Castings Tea (you probably have everything you need to do NACT !) - to the most sophisticated option of Aerated Castings Tea !
(Pump & Aerator Kits sold separately.)
Aerated Castings Tea, Simply Put Is:
Basically, a small amount of castings is placed in a sock/strainer/stocking - usually about 1 to 2 cups of castings to 15 litres of water.
This is suspended in a bucket of non chlorinated water.
The water is then fed oxygen and stirred, usually by using an aquarium air pump and air stone.
This multiplies the good bacteria in the “brew” – the brew can then be watered down by 5 or 10 times before application, and a result still seen.
Why Make Aerated Castings Tea?
Basically, to make a LITTLE VC go a LONG way – also for ease of use in some applications.
One to two cups of VC may make up to 10 to 15 litres of liquid, which can then be diluted with water up to 5 or 10 times it’s volume to make application easier.
WORKSHOPS ALSO AVAILABLE - virtual/recorded option & Face-To-Face at Northey Street City Farm.
Please see my other ads for
Composting worms, bait worms, worm farms, vermicast/vermicompost/worm castings
- Date Listed:10/12/2020
- Last Edited:08/08/2023
- Condition:Used
Similar Ads
- Red wiggler composting worms / worm farm - (can post)Super healthy Red Wrigglers ideal for vermicomposting. All our worms are fed pesticides free food scraps from our garden which uses organic growing practices. You will receive enough to start off a standard composting bin. Approx. 100 worms plus castings which contain worm eggs. $15 (It will take longer to get to maximum composting capacity) Ideal for a 1-2 person household. Approx. 200 worms plus castings which contain worm eggs. $25 We also provide you with some guidelines to follow to k$15Calamvale, QLD•159w
- YAMATO VACUUM DRYING OVEN 91LYAMATO VACUUM DRYING OVEN MODEL: DP43C IN GOOD WORKING ORDER BRAND NEW CAPACITY: 91 L VACUUM PUMP NOT INCLUDED CAN PURCHASE SEPERATELY Yamato DP43C Large Capacity Vacuum Drying Oven, 91 liter Internal Capacity, Max Temp of 200 °C, Max Pressure of 1 Torr, 220VAC.Yamato Part Number: DP43C. The Yamato DP43C operates in the temperature range from room temperature plus 40 °C to 200 °C (up to 392° F) and in the vacuum range from atmosphere 760 to 1 Torr. This vacuum oven is a large capa$6,600Rocklea, QLD•77w
- 2 inch 10HP Diesel Fire Pump E-Start, Cast Iron Q-GWP2DECHP2 inch 10HP Diesel Fire Pump E-Start, Cast Iron Q-GWP2DECHP Ideal for fuel transfer, thanks to its cast-iron finish! The GWP2DECHP cast iron pump is powered by a high-performance 10 HP 4-stroke diesel engine with both electric and recoil starters. Featuring a 2’’ pump inlet and outlet, the hardworking GWP2DECHP pump delivers an impressive water flow rate of up to 20m3 per hour, with a suction height of 8 metres and a max. head of up to 60 metres. With the protective sturdy frame for easy$1,250Acacia Ridge, QLD•98w
- 3 inch 10HP Diesel High Pressure Fire Pump Q-GWP3DEHP3 inch 10HP Diesel High-Pressure Fire Pump Electric Start Q-GWP3DEHP Garpen GWP3DEHP fire fighting pump is a single impeller, high-pressure 3’’ pump built with a high-performance 110HP 4-stroke diesel engine. Capable of delivering a constant water flow of 38m3/h with an amazing 70-metre pump lift and an 8-metre suction height. This fire-fighting pump offers exceptional performance even in the toughest conditions. SPECS: Engine: 10HP 4-Stroke Diesel Starter System: Electric Start W$1,250Acacia Ridge, QLD•98w
- 2 inch 7HP Diesel Fire Pump with Large Fuel Tank Q-GWP2DELTHP2 inch 7HP Diesel Fire Pump with Large Fuel Tank Q-GWP2DELTHP Garpen GWP2DELTHP is a twin impeller 2’’ fire fighting water pump. Powered by a high performance, low fuel consumption 7hp, 4 stroke diesel engine with both electric and recoil starting system. The pump features a 2’’ or 50mm inlet/outlet, a high-pressure water flow rate up to 18,000 litres/hr, a 55mm pump lift, and an impressive suction height up to 8m. SPECS: Engine: 7HP 4-Stroke Diesel Starter System: Electric Start Wit$1,175Acacia Ridge, QLD•98w
- 3 inch 11HP Cast Iron Diesel Fire Pump Q-GWP3DEC3 inch 11HP Cast Iron Diesel Fire Pump Q-GWP3DEC Ideal for fuel transfer and also meets a wide range of applications, thanks to its cast-iron finish and brass impeller! The GWP3DEC cast iron pump is powered by a high-performance 11 HP 4-stroke diesel engine with both electric and recoil starters. Featuring a 3’’ (75mm) pump inlet and outlet, the hardworking GWP3DEC pump delivers a class-leading water flow rate of up to 36m3 per hour, with a suction height of 8 metres and an impressive max. h$1,250Acacia Ridge, QLD•98w
- 3 inch 11HP Cast Iron Diesel Fire Pump with Large Fuel Tank Q-GWP3DELC3 inch 11HP Cast Iron Diesel Fire Pump Electric Start with Large Fuel Tank Q-GWP3DELC Ideal for fuel transfer and also meets a wide range of applications, thanks to its cast-iron finish and brass impeller! The GWP3DEC cast iron pump is powered by a high-performance 11 HP 4-stroke diesel engine with both electric and recoil starters. Featuring a 3’’ (75mm) pump inlet and outlet, the hardworking GWP3DEC pump delivers a class-leading water flow rate of up to 36m3 per hour, with a suction he$1,300Acacia Ridge, QLD•98w
- 2 inch 7HP Diesel Fire Fighting Pump with Large Fuel Tank Q-GWP2DELHP2 inch 7HP Diesel Fire Fighting Pump with Large Fuel Tank Q-GWP2DELHP SPECS: Engine: 7 HP 4-Stroke Diesel Starter System: Electric Start With Battery Plus Recoil Starting System Pump Inlet: 50mm(2inch) Pump Outlet: 50mm(2inch) Pump Lift: 45m Suction Height: 8m Max Capacity: 22m3/h Engine: 7.0HP Diesel Dry weight: 65kg Unit Overall dimension: 58 x 47 x 67cm$1,125Acacia Ridge, QLD•98w
- 2 inch 7HP Twin Impeller Diesel Fire Pump E-Start Q-GWP2DETHP2 inch 7HP Twin Impeller Diesel Fire Pump E-Start Q-GWP2DETHP SPECS: Engine: 7HP 4-Stroke Diesel Starter System: Electric Start With Battery Plus Recoil Starting System Pump Inlet: 50mm(2inch) Pump Outlet: 50mm(2inch) Pump Lift: 55m Suction Height: 8m Max Capacity: 18,000 litres/hr Dry weight: 65kg Unit Overall dimension: 58 x 47 x 56cm$1,125Acacia Ridge, QLD•98w
- EM7040D DIESEL AIR COMPRESSOR 4HP 70lt 125PSI 13CFM..BRAND NEWQ-MC7040D Diesel Air Compressor 4HP 13 CFM Air Switch Throttle Control Fitted with Pressure Regulator 125PSI 70 Lt Tank Easy Start bypass valve Workplace Compliant Australian Design Registered This unit has all the features that you are looking for plus more. The unit features 2 cylinder compressor pump displacement 13CFM, 100% cast-iron tough construction compressor pump as per the pictures above. This pump has a HIGH CFM and HIGH PSI at a LOW RPM. This tells you that ou$1,590Acacia Ridge, QLD•272w
- Aerated Castings Tea Bags/Aerated Compost Tea Bags - Empty, 4L SizeAerated Castings Tea Bags/Aerated Compost Tea Bags - (Empty, 4L Size) Pickup Colingwood Park 4301 Delivery available Australia wide. $10 – One Tea Bag (Empty) (plus $6.50 shipping if req'd) $20 – Three Tea Bags (Empty) (plus $6.50 shipping if req'd) $30 – Five Tea Bags (Empty) (plus $8.00 shipping if req'd) $55 – Ten Tea Bags (Empty) (plus $12.00 shipping if req'd) The bags will hold approx. 4 litres. Condition is "Brand New" - and EMPTY Aerated Castings Tea Bags / Aerated Compost Tea Bags:$10Forest Lake, QLD•152w
- Mini Aerated Castings Tea Bags (Empty Or Filled - 1 cup size)Aerated Castings Tea Bags OR Aerated Compost Tea Bags - 1 Cup Capacity Sold EMPTY (for your own contents) or FILLED (with approx. 1 cup worm castings.) Collect from Collingwood Park 4301. If req'd, shipping is via Australia Post Standard Post. Can NOT ship to WA, NT & TAS due to state Quarantines. EMPTY (Contains NO castings/compost - supply your own): $10 for 3 Mini Tea Bags, Empty (plus $6.50 shipping if req'd) $16 for 6 Mini Tea Bags, Empty (plus $6.50 shipping if req'd) $20 for 8 Mini Tea$10Forest Lake, QLD•152w
- Aerators For Aerated Worm Castings Tea - Or Aerated Compost TeaAerated Castings Tea UPGRADED Aerators FOR PICKUP From Collingwood Park 4301 Delivery Available $105 - ADVANCED Aerator Upgrade - Bubble Pipe ( $20 shipping if req'd) Includes: - 15mm pipe; square shaped base with pre-drilled air holes; barb assembly 2.5m x 8mm air hose ; plus a 1x8mm to 4x4mm converter PLUS one x 4 Litre Tea Bag (Empty). Suits 4 outlet ADVANCED pump. Air riser & base supplied suits 20 litre buckets. Bucket not included. $150 - PRO Aerator Upgrade - 32mm Air Lift (plus $33 s$105Forest Lake, QLD•173w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 572