Sunrise EC2000 HD Wheel Chair 26 Inch
Similar Ads
- 22-50 ton (100/90/80mm pin) Titan Excavator Compaction WheelThe price includes GST. Used 545mm Wide Drum, Titan Excavator Compaction Wheel suit 22-50 Ton machines. 4 rows of pads and fitted with dual Mud Scrapers between the pads. Conditions is used, it has a few bangs & dints but rolls smooth and has plenty of life left. It has had several Headstock Pin Spacing modifications done which allows for a greater range of machines it can fit. This is a well engineered, heavy duty Compaction Wheel, made in Australia by Titan Manufacturing. Drum: * Width: 5$5,650Pullenvale, QLD•5w
- JAZZY Elite HD Power ChairAS NEW Jazzy Elite HD Power Chair with 204 kg limit 2-Motor Front Wheel Drive, 14" tyres for tight turns .Speed up to 7.5km/hr. Ideal for a heavy person with comfortable seating and ease of use. Extra accessories available Originally $7400 with 2 yrs use now offered at $4,800 negotiable. Capalaba area. Please call for an appointment phone Robyn at$4,800Chandler, QLD•1w
- 90mm pin Hitch grabs 80 & 90mm buckets, New Doherty D-Lock Quick HitchThe price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,$8,950Pullenvale, QLD•14w
- Barely used 22-40ton, 90mm pin 750mm Titan Excavator GP Digging BucketThe price includes GST. 90mm pin, 750mm Titan Excavator GP & Trenching Bucket suit 22-40 ton machine. It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). The front cutting edge plate is 50mm thick! Condition is used but it has had very little use, with minimal wear on the teeth and almost no wear on the side cutting edges. This is a thick & sturdy, well built bucket, made in Australia by$3,450Pullenvale, QLD•5w
- Barely used 20-48 ton (90mm pin) 800mm TE Excavator GP Digging BucketThe price includes GST. 90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...). It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick! Condition is used but it has had$3,250Pullenvale, QLD•5w
- 20-50 ton (90mm or 100mm pin) Heavy Duty Excavator RipperThe price includes GST. Used, Solid & Deep, Heavy Duty Excavator Ripper, suit 20-50 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. This is a seriously chunky Ripper with a solid Shank thickness of 100mm (see pics# 4 & 8). This Ripper has 100mm Diameter Pins which have been milled down in the middle to 90mm (see pics#9 & 10). They could easily be replaced back to normal 100mm pi$3,650Pullenvale, QLD•5w
- 21-48 ton (90-100mm pin) Hydraulic Excavator Quick Hitch CouplingThe price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 21-48 Ton machines, but is designed to allow a 90mm Pin machine to pickup attachments with 90-100mm Pins and a wider Pin Center distance. Made for Machines: Daewoo DX300 LC / Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK250LC / SK290LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC30$3,650Pullenvale, QLD•5w
- 23-47 ton (100, 90mm pin) 1500mm Heavy Duty Excavator GP Mud BucketThe price includes GST. Used 1500mm Excavator Heavy Duty Mud Bucket suit 23-47 Ton machine. Condition is used and it has a few bangs and a dent underneath but has had some professional repairs and it is a very sturdy bucket with plenty of life left and has lots of extra welds on the wearing surfaces. It has Tapered sides so the mud slides out easily and there is also extra wear strips welded underneath for durability (see pic#10). Current Headstock configuration: Front Pin Diameter is 100mm,$3,250Pullenvale, QLD•5w
- 9-20 ton (60mm pin) Excavator Pivoting Headstock Hitch Mounting PlateThe price includes GST. 60mm pin Excavator / Backhoe Headstock to suit 9-20 ton machines. There is some light surface rust and a few small dings but is otherwise in great condition. Designed for Kobelco SK100 / SK100LC / SK115SR, Komatsu PC100-3 / PC100-5 / PC100-6 / PC120 / PC120 Mighty / PC120-3 / PC120-5 / PC120-6 / PC128UU-2 / PC150HD / PW100-1 / PW100-3, New Holland EC160LC / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far).$740Pullenvale, QLD•5w
- 12-36 ton (70, 80, 90mm pin) 980mm Heavy Duty Excavator GP BucketThe price includes GST. Used 980mm Excavator GP Digging Bucket suit 12-36 Ton machine. Condition is used but there is still plenty of life left. This is a heavy duty bucket with 35mm thick headstock ears, side cutting edges & reinforcing plate. There is also extra wear strips welded underneath for durability (see in pic #9 & #10). There is one tooth missing. Current Headstock configuration: 70mm Pin Diameter (inside Bosses thick enough to be bored out to suit 80mm or 90mm pins), 531mm Center$1,950Pullenvale, QLD•5w
- New 15-40 ton (90mm or 80mm pin) 800mm AHE Excavator GP Digging BucketThe price includes GST. New 800mm AHE Excavator Digging & Trenching GP Bucket suit 15-40 Ton machine. This bucket is surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It has a deep profile and is in perfect New condition. It has removable bolt-on Side Cutters and is fitted with Genuine Caterpillar Teeth. There are also extra Wear Strips welded underneath for durability (see pic #10). The cutting edges of the sides of the bucket are 32mm thick. *** Current Headstock c$4,950Pullenvale, QLD•5w
- 17-36 ton (90/80mm pin) Excavator Headstock Hitch Mounting PlateThe price includes GST. 90mm/80mm pin Excavator Headstock to suit 17-36 ton machines. There is some surface rust and light pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. The 2 fins could be cut off to make a standard flat plate headstock. The 90mm Pin could be milled down in the middle to make an all-80mm pin headstock. Or the 80mm pin could be sleave$850Pullenvale, QLD•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here