1313 views
$! 2 post 4T HAPP30P floor plate car hoist 1.9m lift STANDARDS TESTED!
$3,290
ON SPECIAL! SAVE $200 while stocks last PLUS freebies!
FREE car ramps and parts carrier.
Heard of HAPP?
Our items can be viewed in Willow Vale on the Northern GC. Collection is from our warehouse in Bris.
We are very proud of our 5* Google reviews!
Website reviews http://happ.com.au/blog/
The HAPP30P two post floor plate hoist, with hydraulic lift is ideal for home enthusiasts that want maximum lift height (1900mm) and support for those unusual sized vehicles with our GEN 2 arms. These arms allow a wider variety of vehicles to be lifted with our hoists and make it easier to balance the vehicle from front to rear on the lift. To do this we have a front arm that has much shorter distance than our current short arms and a long arm that is able to extend to be much longer than our current longer arms. All of this extra flexibility, with arms that still fully pass Australian standards tests.This lift has a 2 point manual release mechanism. Ohhhhh, and did I mention, these hoists are made mostly by robots?!?!
IMPORTANT (BEWARE!) - see our home page for why WE are superior to our competitors regarding Australian Standards - https://happ.com.au/
ALL OUR HOISTS ARE GST INC with a 3 YEAR STRUCTURAL WARRANTY**
THIS HOIST HAS NOW BEEN TESTED, SUBMITTED TO WORKPLACE HEALTH & SAFETY, APPROVED AND CAN BE USED IN BUSINESSES. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
Specs:
Load Capacity – 4000kgs
Lifting Height – 1900mm
Overall Height – 2826mm
Overall Width – 3446mm
Drive through – 2480mm
Width between pillars – 2850mm
Rise/Drop time – 50s rise / 20s drop time
Net weight – 600kg
CE approved Hydraulic Power Pack
Motor Capacity – 240V, Single phase
Power of motor – 2.2kw
Two point safety release
Fast Dual-cylinder lifting system
Chain-driven system
Cable and hydraulic load balancing
Automatic safety locks
Cable-equalization system
Min pad height 107mm
Plastic powder coat finish
Full specs - https://happ.com.au/spec-sheets/
Pickup/Del:
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Bris or arrange your own freight. Should you have any BANKING questions, or wish to obtain a FREIGHT quote, please phone ******** 497 or ******** 277 or email cus******@******.au for more information. Technical questions can go to Gavan on ******** 477.
T's and C's
There is a $20 warehouse fee on all orders, and we have to add 1.7% if paying by cc Full T&C's on our website!
** Parts warranty
We keep our prices down by reducing un-necessary overheads focusing on quality and service. In the rare occurrence of warranty problems, we offer a no fuss parts replacement warranty on our products.
ALL our hoists now come with a 3YR structural warranty if purchased after July 1 2020 *** (please visit happ.com.au/warranty/ for exact clarification)
Some of our hoists are supplied with FREE ramps, spacers or drip & tool trays etc – please check our website for the model you are interested in or have purchased to clarify the inclusions.
Specifications, prices and stock are subject to change without notice.
Why buy from HAPP??
* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
* We sell mainly by recommendation. To do this we have personal and professional customer service; we work with every customer to make sure they are happy with the products they purchase.
* We have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes.
* We also use the best possible materials in our products.
* We apply the best designs from our business registered hoists into our home use hoists.
Insta: https:://www.instagram.com/happ_australia/
FB: https://business.facebook.com/HappAutoHoists
STORAGE WORKSHOP TOOLS SHED PROJECT QUALITY CARHOIST CARLIFT GARAGE CAR HERO MOLNAR JOEL AUSSIE CLASSIC TUFF
FREE car ramps and parts carrier.
Heard of HAPP?
Our items can be viewed in Willow Vale on the Northern GC. Collection is from our warehouse in Bris.
We are very proud of our 5* Google reviews!
Website reviews http://happ.com.au/blog/
The HAPP30P two post floor plate hoist, with hydraulic lift is ideal for home enthusiasts that want maximum lift height (1900mm) and support for those unusual sized vehicles with our GEN 2 arms. These arms allow a wider variety of vehicles to be lifted with our hoists and make it easier to balance the vehicle from front to rear on the lift. To do this we have a front arm that has much shorter distance than our current short arms and a long arm that is able to extend to be much longer than our current longer arms. All of this extra flexibility, with arms that still fully pass Australian standards tests.This lift has a 2 point manual release mechanism. Ohhhhh, and did I mention, these hoists are made mostly by robots?!?!
IMPORTANT (BEWARE!) - see our home page for why WE are superior to our competitors regarding Australian Standards - https://happ.com.au/
ALL OUR HOISTS ARE GST INC with a 3 YEAR STRUCTURAL WARRANTY**
THIS HOIST HAS NOW BEEN TESTED, SUBMITTED TO WORKPLACE HEALTH & SAFETY, APPROVED AND CAN BE USED IN BUSINESSES. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
Specs:
Load Capacity – 4000kgs
Lifting Height – 1900mm
Overall Height – 2826mm
Overall Width – 3446mm
Drive through – 2480mm
Width between pillars – 2850mm
Rise/Drop time – 50s rise / 20s drop time
Net weight – 600kg
CE approved Hydraulic Power Pack
Motor Capacity – 240V, Single phase
Power of motor – 2.2kw
Two point safety release
Fast Dual-cylinder lifting system
Chain-driven system
Cable and hydraulic load balancing
Automatic safety locks
Cable-equalization system
Min pad height 107mm
Plastic powder coat finish
Full specs - https://happ.com.au/spec-sheets/
Pickup/Del:
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Bris or arrange your own freight. Should you have any BANKING questions, or wish to obtain a FREIGHT quote, please phone ******** 497 or ******** 277 or email cus******@******.au for more information. Technical questions can go to Gavan on ******** 477.
T's and C's
There is a $20 warehouse fee on all orders, and we have to add 1.7% if paying by cc Full T&C's on our website!
** Parts warranty
We keep our prices down by reducing un-necessary overheads focusing on quality and service. In the rare occurrence of warranty problems, we offer a no fuss parts replacement warranty on our products.
ALL our hoists now come with a 3YR structural warranty if purchased after July 1 2020 *** (please visit happ.com.au/warranty/ for exact clarification)
Some of our hoists are supplied with FREE ramps, spacers or drip & tool trays etc – please check our website for the model you are interested in or have purchased to clarify the inclusions.
Specifications, prices and stock are subject to change without notice.
Why buy from HAPP??
* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
* We sell mainly by recommendation. To do this we have personal and professional customer service; we work with every customer to make sure they are happy with the products they purchase.
* We have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes.
* We also use the best possible materials in our products.
* We apply the best designs from our business registered hoists into our home use hoists.
Insta: https:://www.instagram.com/happ_australia/
FB: https://business.facebook.com/HappAutoHoists
STORAGE WORKSHOP TOOLS SHED PROJECT QUALITY CARHOIST CARLIFT GARAGE CAR HERO MOLNAR JOEL AUSSIE CLASSIC TUFF
- Date Listed:26/10/2023
- Last Edited:17/04/2024
- Condition:New
- Warranty:Yes
Similar Ads
- Car Wash Hoist 2 post 4 tonne three phase clear floor ARCL240CFWBClear Floor Type Car Washing Lift, Pneumatic safety lock release · Dual direct-drive cylinder , no chain no cable no wear and tear ,heavy duty support, run more smoothly and long life service. · All electrical components are waterproof · Fixed type control cabinet, standard aluminum motor avoids overheated and ensures long service life · Surface shot blasting process, electrostatic powder spraying, strong surface adhesion and durable powder coating · It has adopted 115% dynamic$4,679Berrinba, QLD•2d
- BRAKE TESTER HEAVY, DECELEROMETER, TINT TESTER AND HEADLIGHT ALIGNER**INTEREST FREE TERMS OVER SIX MONTHS UNTIL THE END OF JUNE TAA AUTOSTOP HEAVY BRAKE TESTER with GPS/USB/Bluetooth This heavy vehicle brake tester is a portable, battery-powered in-vehicle brake performance tester that measures average and maximum acceleration, stopping distance, test speed and pedal- force required to stop a vehicle. It evaluates brake performance in a quick reliable manner and prints an accurate test report that complies with International Standards. An efficient diagnostic$4,095Brisbane City, QLD•2w
- Ute Tray - Aluminium - Dual CabDual Cab Ute Tray - New aluminium ute tray - Heavy duty ute trays Brisbane. Bris Ute Trays And Racks at Acacia Ridge. TRAY PRICE $2460. Includes the front standard tube rack, full length rope rails, checker plate mud guards, mud flaps, number plate bracket and light, tail lights. Please note: TRAY MOUNTING kit will cost extra, please call. TUB REMOVAL includes disposal $250. FITTING tray to vehicle $650. Prices quoted are for standard size dual cab trays. Custom size trays cost extra includ$2,460Acacia Ridge, QLD•1d
- Wymo Wheelchair Hoist for Car Roof rackWymo Wheelchair Hoist for Car Roof rack, in working order. If you're interested in postage message me and i get get a quote to ship through Australia Post$999Loganholme, QLD•5w
- MR2 Spyder Cusco Breast PlateUsed Cusco Floor Subframe Plate (Breast Plate) for an MR2 Spyder ZZW30. In good used condition, has been on the car for around 3 years. Comes with plastic clips and bolts.$125Ferny Grove, QLD•6d
- T-REX 800kg Electric Hoist Winch Crane 12V 360 Degree Engine Car TruckSpecification Manufacturer: T-REX Model: XL360 Series II Power Input: 12V DC 125 Amps Lifting Capacity (max): 500kg single-rope / 800kg double-rope Overload Protection: Disables Operation with 30 Second Re-start Lifting Height (base to hook): 2 m Reach (max): 1.44m Rotation (continuous) w/ Brake: 360° manual Lifting cable: 4.8mm x 4.5m (single-rope), 4.8mm x 5.5m (double-rope) Line Speed w/ No Load: 3.6m/min (single-rope) Switch Cable Length: 6.6 m *Requires high tensile bolts to$848Spring Hill, QLD•20w
- BARGAIN! 3 Door Flat Aluminium Canopy Toolbox for UTE! HEAVY DUTY!🔥 Superior Trailers | Ute & Trailer Canopy, Toolbox, Single Axle Trailers, Tandem Trailers, Flatbed, Hydraulic Tipper, and Plant Trailers -------------------- Flat Plate Aluminium Toolbox/Canopy on Sale! Features: • Heavy Duty 2.5mm Flat sheet (Compare before you buy - most other companies sell 2.0mm which is nowhere near as strong and robust) • Fully Seam Welded • Rubber weather seals • Strong Key Lockable Lock - All locks keyed alike for convenience • Full Length Piano Type Hin$3,299Berrinba, QLD•35w
- Toyota Yaris Hatch 11 - 20 Deck Board Spare Wheel Boot Cover FloorGENUINE Toyota Yaris Deck Boards Spare Wheel Boot Cover Floor Hit More Plus tab to read full add Have both Versions, check part numbers on add with Vin with Dealer to confirm correct item. Choice of 7, The piece you lift in boot that covers spare wheel well, with inbuilt handle. Sits directly above spare wheel, not the parcel shelf, which sits much higher, do also have parcel shelves. P/N 58410-52090-B0 $70.00 Each Negotiable 1 Only, More involved piece with fold up flaps, all intact ,$70NegotiableSlacks Creek, QLD•460w
- REDKOTE FUEL TANK LINER RED KOTE RED-KOTE PETROL TANK - Liquid or DryRed-Kote® Dry – Fuel Tank Liner OR Ready to use Red-Kote® Liquid is available for pick-up during business hours from my Northgate workshop. Alternatively, you can check out website for other distributors - www.ftrs.com.au NOTE - The Liquid product must be picked up as it cannot be posted - Dry can be posted. Red-Kote® Dry $91.75 Red-Kote® Liquid $105.50 The toughest, most flexible and best adhering liner for fuel tank repairs. Seals small leaks and prevents rust in metal tanks. In use on$105Northgate, QLD•305w
- Ford Mondeo Wagon MC 10 - 14 Boot Mat Carpet Floor Cargo AreaGENUINE Ford Mondeo Wagon Boot Carpet Cargo Area Black, As New , unused, slight line mark from previous storage. This is floor carpet piece in the cargo area that came standard with car. P/N 9S7JN13065AA3ZHE Suits MC Series 2010 - 2014 might suit MA MB Series $75.00 Negotiable Less than half suggested Dealer Retail$75NegotiableSlacks Creek, QLD•428w
- $390 DISCOUNT! Car Hoist 4T 2 post HAPP 60P Bris 240v w/FREE ramps!SAVE $390! was $3690, on sale for $3300! FREE ramps with this model! While stocks last GST INC WITH A 3 YR STRUCTURAL WARRANTY - https://happ.com.au/warranty/ MADE NEARLY ENTIRELY WITH ROBOTS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. The HAPP 60P is a great choice for users with infrequent use of the lift. It has a low column height for low ceilings and provides a cost effective lift with full HAPP reliability. Great for enthusi$3,300Hendra, QLD•22h
- SPECIAL - $1250 ONLY - $250 DISCOUNT - 1.8T Car Rotisserie HAPP Rot01Discounted $250. Price includes GST. CAN VIEW IN WILLOW VALE prior to buying - . These rotisseries go extremely fast once in stock, to avoid disappointment please order asap! GST INCLUSIVE AND COMES WITH A ONE YEAR STRUCTURAL WARRANTY ** CAR ROTISSERIE - HAPP ROT01 IN STOCK AND READY TO GO OUT!! Love our hoists but can't afford one just yet? Need to start your car off on a rotisserie before moving it across to one of our hoists? Are you tired of crawling under your car and u$1,250Willow Vale, QLD•22h
- HUGE SALE - $590 DISC 4 post 2m lift Happ25 Quality! Bris / post 5*s!SAVE $590! While stocks last! LIMITED!! We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company. This hoist has been put through Australian Standards compliance with all the actual required testing and is being sold at the same price as companies that have not done this. After extensive detailed structural analysis, cost and time, by an Australian Engineer, the HAPP25 model is now available with Australian Stand$3,800Hendra, QLD•22h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3497