308 views
Baseplates for HAPP hoists - 2 post hoists
$700
The big base plate is exactly that... A big base plate for HAPP hoists.
If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.
The big base plate can be installed into existing HAPP hoist installations that need to be upgraded.
The big base plate is held in position by 7 dyna-bolts and connects to the happ base plate using bolts that screw through the hoist base plate holes into matching threaded holes in the big base plate.
The big base plate has thickness of 14mm which is more than adequate for all hoist applications.
Floor plate users will make minor modifications to floor plates to clear the big base plate and move the mount tabs up 16 mm to allow for the thickness of the big base plate.
These base plates are made specifically for HAPP hoists, no other hoist manufacturer is supported.
The big base plate does not alleviate the need to balance the vehicle on the hoist.
These are sold in lots of 2 and can be shipped out the same time as your HAPP hoist at a minimal cost.
We also include the bolts that you will need to secure these to your cement, normally an additional $80.00.
Collection from our 3PL warehouse in Hendra, or we freight through all of Australia, ask us for a quote.
Please contact us on ******** 497 or cus******@******.au.
Full T&C's on our website but we have a $20 warehouse fee on all orders and 1.7% cc fee if paying that way.
Website prices supercede all advertising, our website will always be current, prices subject to change without notice.
What else do we do?
We also sell hoists, please check out our other listings. We are proud to announce that after extensive detailed structural analysis, cost and time, some of our models are available with Australian Standards certification and can easily be registered with WH&S by HAPP for your reassurance. WH&S require design registration and formal processes and procedures to be followed in the workplace. Our WH&S package includes the registration documents, the necessary procedures and log books to implement a documented operation / maintenance of the hoist.
OUR NEW HOIST MODELS ARE MADE 90% WITH ROBOTICS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. Check out our website for further information.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
WHY CHOOSE US?
HAPP Australia Pty Ltd is a well established provider of high quality automotive lifts to Australia and New Zealand customers. We are an Australian owned and made company and have been in business since 2010. We are the original owners, and work hard every year to bring the best service and quality to our customers that we can.
We have evolved from supplying to automotive club members to fully Quality Assured reviews of hoists by Australian registered engineers and certification with Australian Standards and Workplace Health and Safety allowing business customers to use HAPP products with confidence:
We sell mainly by recommendation. To do this we have personal and professional customer service; we work with every customer to make sure they are happy with the products they purchase.
Check our customer reviews on our website! https://happ.com.au/products/blog/
Follow us on Instagram: https:://www.instagram.com/happ_australia/
Follow us on or Facebook https://www.facebook.com/HappAutoHoists
If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.
The big base plate can be installed into existing HAPP hoist installations that need to be upgraded.
The big base plate is held in position by 7 dyna-bolts and connects to the happ base plate using bolts that screw through the hoist base plate holes into matching threaded holes in the big base plate.
The big base plate has thickness of 14mm which is more than adequate for all hoist applications.
Floor plate users will make minor modifications to floor plates to clear the big base plate and move the mount tabs up 16 mm to allow for the thickness of the big base plate.
These base plates are made specifically for HAPP hoists, no other hoist manufacturer is supported.
The big base plate does not alleviate the need to balance the vehicle on the hoist.
These are sold in lots of 2 and can be shipped out the same time as your HAPP hoist at a minimal cost.
We also include the bolts that you will need to secure these to your cement, normally an additional $80.00.
Collection from our 3PL warehouse in Hendra, or we freight through all of Australia, ask us for a quote.
Please contact us on ******** 497 or cus******@******.au.
Full T&C's on our website but we have a $20 warehouse fee on all orders and 1.7% cc fee if paying that way.
Website prices supercede all advertising, our website will always be current, prices subject to change without notice.
What else do we do?
We also sell hoists, please check out our other listings. We are proud to announce that after extensive detailed structural analysis, cost and time, some of our models are available with Australian Standards certification and can easily be registered with WH&S by HAPP for your reassurance. WH&S require design registration and formal processes and procedures to be followed in the workplace. Our WH&S package includes the registration documents, the necessary procedures and log books to implement a documented operation / maintenance of the hoist.
OUR NEW HOIST MODELS ARE MADE 90% WITH ROBOTICS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. Check out our website for further information.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
WHY CHOOSE US?
HAPP Australia Pty Ltd is a well established provider of high quality automotive lifts to Australia and New Zealand customers. We are an Australian owned and made company and have been in business since 2010. We are the original owners, and work hard every year to bring the best service and quality to our customers that we can.
We have evolved from supplying to automotive club members to fully Quality Assured reviews of hoists by Australian registered engineers and certification with Australian Standards and Workplace Health and Safety allowing business customers to use HAPP products with confidence:
We sell mainly by recommendation. To do this we have personal and professional customer service; we work with every customer to make sure they are happy with the products they purchase.
Check our customer reviews on our website! https://happ.com.au/products/blog/
Follow us on Instagram: https:://www.instagram.com/happ_australia/
Follow us on or Facebook https://www.facebook.com/HappAutoHoists
- Date Listed:17/10/2014
- Last Edited:04/10/2023
- Condition:New
- Warranty:Yes
Similar Ads
- Ute toolbox lock - stainless steel T handle with key and gasket$8. Stainless steel T handle toolbox lock ideal for boxes on back of trade vehicles/utes. Comes with rubber gasket and 2 keys. New. Just took it out if the box to take photos. Been in the garage for a while. One only. Pick up Brisbane northside preferred but can post at your cost. No couriers. No off gumtree transactions.$5Kedron, QLD•29w
- Universal Load Rest Pins ,Suit Trayback UteUniversal Load Rest Pins Suit Tray Back ute , suit Tube Headboard or Rear Ladder Rack Pair x 1 , 18mm Round x 175mm Long Machined Aluminium sold as pairs (2 singles ) Pick up Geebung Brisbane , or we can post Australia Wide for an additonal $11 Utestore 26 Basalt Street Geebung QLD 4034$35Geebung, QLD•281w
- 70s vintage Harada HA-20EX fully auto electric car antenna / aerial70’s vintage Harada HA-20EX fully auto electric car antenna / aerial - This antenna is about 70’s era and worked perfectly at the time when removed, wrapped and stored in garage. Can’t remember what car it came from. It is Japan made all metal construction with all wiring, fuses and plugs. Located at Clayfield. Happy to post at buyer’s expense.$185Clayfield, QLD•2w
- RADIATOR JIG - Clamp your radiators while you work on it.RADIATOR JIG Designed and manufactured in Brisbane for the Radiator industry. * (6mm Holding Plates (200mm square) are covered by 6mm insertion rubber - the core can't move and won't be crushed. * Lower Holding Plate mounting consists of sturdy pipe inside pipe with a fully welded collar to take the weight applied (no split pins to wear out). * Top Holding Plate winder is 25mm solid threaded bar through solid threaded block 76mm long. * Fully floating bearing on top Holding Plate allows fo$1,125Northgate, QLD•306w
- RIDGE OR BEAD ROLLER FORMER RADIATOR COPPER BRASS ALUMINIUM PIPERIDGE ROLLER or BEAD ROLLER or RIDGE FORMER This is a tool to suit a variation of industries. Tubes and pipes, down to an internal diameter of 25mm, as well as flat sheets can have a ridge applied. This compact unit rolls a neat ridge around copper, brass, aluminium, steel or stainless steel fittings to securely hold hoses in place. USES * Radiators and cooling systems (both copper/brass and aluminium) * Intercoolers and all associated pipe work * Chassis building and * Race car buil$330Northgate, QLD•306w
- REDKOTE FUEL TANK LINER RED KOTE RED-KOTE PETROL TANK - Liquid or DryRed-Kote® Dry – Fuel Tank Liner OR Ready to use Red-Kote® Liquid is available for pick-up during business hours from my Northgate workshop. Alternatively, you can check out website for other distributors - www.ftrs.com.au NOTE - The Liquid product must be picked up as it cannot be posted - Dry can be posted. Red-Kote® Dry $91.75 Red-Kote® Liquid $105.50 The toughest, most flexible and best adhering liner for fuel tank repairs. Seals small leaks and prevents rust in metal tanks. In use on$105Northgate, QLD•306w
- VN23 BRASS MOUNTING CLIP FOR HORN VINTAGE PEDAL CAR CYCLOPS BIKEItem: VN-23 BRASS MOUNTING CLIP This is a Brass Mounting Clip that can be used on most sizes of Brass horns. Recommended on Bike, Bicycle, Pedal Car or Car. They are also often used to mount horns on motorised wheelchairs and buggy's. DISCOUNT WHEN YOU PURCHASE 2 OR MORE - OR PURCHASE WITH A HORN • 1 for $12.50 • 2 for $20.00 - and $10 for any additional brackets • Purchase WITH a horn and the mount is discounted to $8 :*¨¨*:::*¨¨*::*¨¨*:::*¨¨*::*: The 4 P's - Payment, Pick-up, Postage and P$10Northgate, QLD•300w
- REPLACEMENT THERMOMETER fit VINTAGE VETERAN MOTOMETERS, BOYCE SMALLREPLACEMENT THERMOMETER (only) - SMALL or LARGE These thermometers fit - JUNIOR / SMALL, (2 ¼inch or 58mm) Motometer; or - SENIOR / LARGE, (3 ¼ inch or 83mm) Motormeter NOTE - you are purchasing replacement thermometer only - NOT a Motometer A direct replacement - no modifications are necessary. Also available, at the same price, is the replacement Thermometer to suit SENIOR LARGE (3 ¼ inch or 83mm) model. The thermometers are red filled, as original. $39.95 Small (Junior) or Large (Senior)$39Northgate, QLD•302w
- Grommet Fuel Hose 8mmCode RFH516 I.D. 5/16" (8mm) Purchased for car project and never opened. Package "Suits most Japanese, European and Australian vehicles with carburettor, including current models." Pick up any day or can post for $7.60 anywhere in Australia.$10Bridgeman Downs, QLD•347w
- Genuine vy hsv dash cluster 180xxx kilometresEXCELLENT CONDITION VY HSV CLUSTER ( I HAVE TWO PINK OR RED) 18XXXX KMS HIGH QUALITY PHILIPS LED’S PICKUP FITZGIBBON OR CAN POST ANYWHERE CHECK OUT MY OTHER ADS May swap for other hsv parts or for 3.7’s diff lsd (ill add cash for trutrac) Tags: Drag drift harrop turbo supercharger vortech blower nitrous vh vk VL vz VT vy hsv torana monaro v8 ls ls1 hdt patrol land cruiser 4x4 rally truck ute cab wrecking wreck wanted swap scheel snap on tools steel HSV maloo clubsport gts grange senator ls2$1,000Chermside, QLD•6w
- Tyre machine Combo HAPP TC10 WB10 perfect for race car / home workshop$180 savings for the combo pack! Perfect for the beginner or those doing race car tyres or if you are a small workshop. In stock and ready to sell as a combo SAVE $180!! TC10 – Swing Arm Tyre Changer – $1490 gst inclusive individual price The TC 10 is our most cost effective tyre changer, used a lot by race car drivers, enthusiasts and small workshops that don’t have time to take tyres to other shops and wait for the job. It can be fitted with the optional top assist arm for difficult tyres suc$2,690Hendra, QLD•3d
- SAVE $1K! Full rise 3T scissor lift HAPP12 3yr wrnty BRIS/freight WH&SYOU READ CORRECTLY - SAVE $1000! FREE Parts Carrier! While stocks last! Get in while stock available! Approved for business. CAN VIEW IN WILLOW VALE prior to buying. The HAPP12 scissor hoist is great for people who want a full rise scissor lift that allows you to work on the car’s drive train easily. It packs flat when you aren’t using it and can be used for all kinds of automotive maintenance and repairs. The 1850 lift height is more than many of the non Happ lifts sold in the market. The HAPP$4,990Hendra, QLD•3d
- 5* Reviews! 2 Post ADJUSTABLE Portable Hoist Clear Floor HAPP95 2.42mFREE Roller Seat while stocks last! SAVE $200! was $4090, on sale for $3890! 5* Reviews! Free car ramps Value $140 ALL OUR HOISTS ARE GST INC and have a 3 YEAR STRUCTURAL WARRANTY - T's and C's on our website - www.happ.com.au * We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company. * The HAPP 95 is like nothing else on the market. You are in control of what distance you have between your columns. A great idea$3,890Hendra, QLD•3d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3497