608 views
HUGE SALE on our 4 post car storage hoist SAVE $590 Happ25 Post/Bris
$3,800
SAVE $590! LIMITED stock!
RRP $4390.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
This hoist has been put through Australian Standards compliance with all the actual required testing and is being sold at the same price as companies that have not done this.
After extensive detailed structural analysis, cost and time, by an Australian Engineer, the HAPP25 model is now available with Australian Standards certification and can easily be registered with WH&S by HAPP for your reassurance. WH&S require design registration and formal processes and procedures to be followed in the workplace. Our WH&S package includes the registration documents, the necessary procedures and log books to implement a documented operation / maintenance of the hoist.
The happ25 includes 3 drip trays complimentary, and a tool tray which can either hold your tools between the runways, or be the base of your jacking beam if you want to use your own standard bottle jack, We also sell both the hand pump model and air pneumatic jacking beams – mini scissor lifts. Also castor wheels to move the hoist around.
* All lifts are inspected TWICE by external quality assurance engineers during the production assembly.
* Our steel columns are 5mm which is thicker than what is required by WH&S. All other companies are only at 4mm.
* We have included TWO extra strengthening beams under EACH runway per Australian Standards.
* We have TRIPLE safety mechanisms that are now required for the latest Australian Standards testing.
* Our locking mechanisms are every 130mm, not every 150mm like other companies.
* Our cables are 12.5mm thick. They have been tested against Australian Standards requirements in NATA registered laboratories in Australia and exceed the Australian Standards requirements.
Specs:
* Load Capacity – 4000kgs
* Lifting Height – 2000mm
* Outer dimensions (LxWxH) – 4826 x 2845 x 2318mm
* Net weight – 795kg
* CE approved Hydraulic Power Pack
* Motor Capacity – 240V - single phase
* Power of motor – 2.2kw
* Large 12.5mm lift cables as used on our 5T hoist
* Dual 90x60mm extra strength beams under each runway per engineer review
* 5 mm ultra thick columns – thicker than engineer requirements
* Cable and hydraulic load balancing
* Automatic safety locks
* Plastic powder coat finish
Optional items:
- Hand pump jacking beam – $1095.00 (gst inc)
- Air pneumatic jacking beam – $1295.00 (gst inc)
Price:
$200 for our WH&S kit
THESE PRICES ARE CURRENT AT 1.11.23.
Pickup/Del:
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Brisbane, or arrange your own freight. Should you have any BANKING questions, or wish to obtain a FREIGHT quote, please phone us on *******3497 or email cus******@******.au for more information. Technical questions can go to Gavan on *******8477.
T's & C's - There is a $20 warehouse fee on all orders, and we have to add 1.7% if paying by credit card.
FULL T&C'S ON OUR WEBSITE
Why buy from HAPP??
* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
* We sell mainly by recommendation. To do this we have personal and professional customer service, we work with every customer to make sure they are happy with the products they purchase.
* Imported products are typically assembled overseas to keep the costs down. We have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes.
* We also use the best possible materials in our products.
Our website info supersedes all ads - please double check.
Check our reviews http://happ.com.au/blog/
Instagram: https:://www.instagram.com/happ_australia/
Facebook: https://business.facebook.com/HappAutoHoists
CAR PROJECT WORKSHOP TOOLS PARKING GARAGE SHED STORAGE
RRP $4390.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
This hoist has been put through Australian Standards compliance with all the actual required testing and is being sold at the same price as companies that have not done this.
After extensive detailed structural analysis, cost and time, by an Australian Engineer, the HAPP25 model is now available with Australian Standards certification and can easily be registered with WH&S by HAPP for your reassurance. WH&S require design registration and formal processes and procedures to be followed in the workplace. Our WH&S package includes the registration documents, the necessary procedures and log books to implement a documented operation / maintenance of the hoist.
The happ25 includes 3 drip trays complimentary, and a tool tray which can either hold your tools between the runways, or be the base of your jacking beam if you want to use your own standard bottle jack, We also sell both the hand pump model and air pneumatic jacking beams – mini scissor lifts. Also castor wheels to move the hoist around.
* All lifts are inspected TWICE by external quality assurance engineers during the production assembly.
* Our steel columns are 5mm which is thicker than what is required by WH&S. All other companies are only at 4mm.
* We have included TWO extra strengthening beams under EACH runway per Australian Standards.
* We have TRIPLE safety mechanisms that are now required for the latest Australian Standards testing.
* Our locking mechanisms are every 130mm, not every 150mm like other companies.
* Our cables are 12.5mm thick. They have been tested against Australian Standards requirements in NATA registered laboratories in Australia and exceed the Australian Standards requirements.
Specs:
* Load Capacity – 4000kgs
* Lifting Height – 2000mm
* Outer dimensions (LxWxH) – 4826 x 2845 x 2318mm
* Net weight – 795kg
* CE approved Hydraulic Power Pack
* Motor Capacity – 240V - single phase
* Power of motor – 2.2kw
* Large 12.5mm lift cables as used on our 5T hoist
* Dual 90x60mm extra strength beams under each runway per engineer review
* 5 mm ultra thick columns – thicker than engineer requirements
* Cable and hydraulic load balancing
* Automatic safety locks
* Plastic powder coat finish
Optional items:
- Hand pump jacking beam – $1095.00 (gst inc)
- Air pneumatic jacking beam – $1295.00 (gst inc)
Price:
$200 for our WH&S kit
THESE PRICES ARE CURRENT AT 1.11.23.
Pickup/Del:
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Brisbane, or arrange your own freight. Should you have any BANKING questions, or wish to obtain a FREIGHT quote, please phone us on *******3497 or email cus******@******.au for more information. Technical questions can go to Gavan on *******8477.
T's & C's - There is a $20 warehouse fee on all orders, and we have to add 1.7% if paying by credit card.
FULL T&C'S ON OUR WEBSITE
Why buy from HAPP??
* We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
* We sell mainly by recommendation. To do this we have personal and professional customer service, we work with every customer to make sure they are happy with the products they purchase.
* Imported products are typically assembled overseas to keep the costs down. We have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes.
* We also use the best possible materials in our products.
Our website info supersedes all ads - please double check.
Check our reviews http://happ.com.au/blog/
Instagram: https:://www.instagram.com/happ_australia/
Facebook: https://business.facebook.com/HappAutoHoists
CAR PROJECT WORKSHOP TOOLS PARKING GARAGE SHED STORAGE
- Date Listed:01/11/2023
- Last Edited:13/12/2023
- Condition:New
- Warranty:Yes
- SPECIAL! 4T car hoist 1.9mtr lift HAPP40P Bris or freight 5*GoogleSAVE $200 while stocks last complimentary ramps also included - call for stock and availability Can view in Willow Vale. Review from Rait P - https://happ.com.au/rait-pinnak-happ40p-2-post-clear-floor-asymmetric-arms/ See our 5 Star Reviews on Google! GST INC AND COMES WITH A 3 YR WARRANTY We are proud to announce that after extensive detailed structural analysis, cost and time, the HAPP40P model is available with Australian Standards certification and can easily be registered with WH&$3,690Hendra, QLD•2d
- Tyre machine Combo HAPP TC10 WB10 perfect for race car / home workshop$180 savings for the combo pack! Perfect for the beginner or those doing race car tyres or if you are a small workshop. In stock and ready to sell as a combo SAVE $180!! TC10 – Swing Arm Tyre Changer – $1490 gst inclusive individual price The TC 10 is our most cost effective tyre changer, used a lot by race car drivers, enthusiasts and small workshops that don’t have time to take tyres to other shops and wait for the job. It can be fitted with the optional top assist arm for difficult tyres suc$2,690Hendra, QLD•3d
- $390 DISCOUNT! Car Hoist 4T 2 post HAPP 60P Bris 240v w/FREE ramps!SAVE $390! was $3690, on sale for $3300! FREE ramps with this model! While stocks last GST INC WITH A 3 YR STRUCTURAL WARRANTY - https://happ.com.au/warranty/ MADE NEARLY ENTIRELY WITH ROBOTS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. The HAPP 60P is a great choice for users with infrequent use of the lift. It has a low column height for low ceilings and provides a cost effective lift with full HAPP reliability. Great for enthusi$3,300Hendra, QLD•3d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3497