462 views
ON SPECIAL! 3T Happ12 fixed full rise car scissor lift BRIS/post WH&S
$4,990
SAVE a WHOPPING $1000! While stocks last, RRP $5990, on sale for $4990! Stock going fast.
CAN VIEW IN WILLOW VALE prior to buying.
The HAPP12 scissor hoist is great for people who want a full rise scissor lift that allows you to work on the car’s drive train easily. It packs flat when you aren’t using it and can be used for all kinds of automotive maintenance and repairs. The 1850 lift height is more than many of the non Happ lifts sold in the market.
The HAPP 12 is tested and passed against Australian Standards with a safe working load of 3T. It has been registered with Qld Workplace Health and Safety so is able to be used in commercial workshops. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
Features
Fast Dual-cylinder dual scissor lifting system
Stable lifting and lowering
HAPP Australian Standard designs – designed verified against AS1418.9 and many other Australian Standards by Queensland engineers.
Precision CNC controlled cutting and Robot welding provide highest quality product.
Electric release solenoids, no need for air to operate lift.
Variable rate arms ensure even heavy vehicles can lift from ground.
Control unit is of exceptional quality to other lift suppliers
Moveable control unit and lift
High grade scissor beams exceed Australian standards
Toe protection guards
Anti slip tread plates
Latches, pins and locking ladder use premium steel grades that exceed Australian standards
Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
Upgrade from CE certified (Europe and USA) with HAPP Aus Std designs
Electronic max height limit switch
Access to HAPP customer group buy plan
Colour is blue platform / base and grey scissor
Specs
Maximum Load Capacity – 3000 Kg
Maximum Lifting Height – 1850mm
Minimum Lifting Height – 110mm
Width between runways – 800mm
Outer dimensions (LxWxH) – 2083 x 2100 x 180mm
Table length – 1475mm
Runway width – 650mm
Middle gap – 800mm
Motor Capacity – 240V, Single phase
Gross Weight – 857kgs
Nett Weight – 841kgs
Plastic powder coat finish
Packing dimensions of hoist: 2130 x 735 x 375mm
Packing dims of control box: 1140 x 425 x 485mm
Weight of control box: GW:47KG, NW:27KG
The HAPP 12 is optimised for low frequency users as it uses electronic solenoids to operate the safety latch, making the installation and operation simpler as it does not require any compressed air connection to operate. Most users of scissor lifts prefer this option.
WH&S kit - $200 optional
Pickup/Del
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Bris, or arrange your own freight (there is a $20 warehouse fee on all orders). To obtain a FREIGHT quote or you have banking questions, please contact us direct *******3497 or email cus******@******.au for more information.
T’s & C’s
Please note, there is a $20 warehouse fee on all orders, and if paying by credit card, we have to add 1.7% (it goes straight to the ANZ, not us).
If you have any TECHNICAL questions, phone Gavan on *******8477.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards. Our catalogue shows this picture on EVERY CAR LIFT. BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.
Check our customer reviews http://happ.com.au/blog/
Follow us Insta: https:://www.instagram.com/happ_australia/
https://www.facebook.com/HappAutoHoists/
CAN VIEW IN WILLOW VALE prior to buying.
The HAPP12 scissor hoist is great for people who want a full rise scissor lift that allows you to work on the car’s drive train easily. It packs flat when you aren’t using it and can be used for all kinds of automotive maintenance and repairs. The 1850 lift height is more than many of the non Happ lifts sold in the market.
The HAPP 12 is tested and passed against Australian Standards with a safe working load of 3T. It has been registered with Qld Workplace Health and Safety so is able to be used in commercial workshops. THIS WAS DONE AFTER FULL ANALYSIS TESTING, NOT JUST SUBMISSION OF A DESIGN ON PAPER.
We are proud to announce that we are now the sole Australian trading company for these quality hoists for this large multi-national company.
Features
Fast Dual-cylinder dual scissor lifting system
Stable lifting and lowering
HAPP Australian Standard designs – designed verified against AS1418.9 and many other Australian Standards by Queensland engineers.
Precision CNC controlled cutting and Robot welding provide highest quality product.
Electric release solenoids, no need for air to operate lift.
Variable rate arms ensure even heavy vehicles can lift from ground.
Control unit is of exceptional quality to other lift suppliers
Moveable control unit and lift
High grade scissor beams exceed Australian standards
Toe protection guards
Anti slip tread plates
Latches, pins and locking ladder use premium steel grades that exceed Australian standards
Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity
Upgrade from CE certified (Europe and USA) with HAPP Aus Std designs
Electronic max height limit switch
Access to HAPP customer group buy plan
Colour is blue platform / base and grey scissor
Specs
Maximum Load Capacity – 3000 Kg
Maximum Lifting Height – 1850mm
Minimum Lifting Height – 110mm
Width between runways – 800mm
Outer dimensions (LxWxH) – 2083 x 2100 x 180mm
Table length – 1475mm
Runway width – 650mm
Middle gap – 800mm
Motor Capacity – 240V, Single phase
Gross Weight – 857kgs
Nett Weight – 841kgs
Plastic powder coat finish
Packing dimensions of hoist: 2130 x 735 x 375mm
Packing dims of control box: 1140 x 425 x 485mm
Weight of control box: GW:47KG, NW:27KG
The HAPP 12 is optimised for low frequency users as it uses electronic solenoids to operate the safety latch, making the installation and operation simpler as it does not require any compressed air connection to operate. Most users of scissor lifts prefer this option.
WH&S kit - $200 optional
Pickup/Del
We offer competitive freight rates to all Australian states, or you are welcome to pick up yourself from our warehouse in Bris, or arrange your own freight (there is a $20 warehouse fee on all orders). To obtain a FREIGHT quote or you have banking questions, please contact us direct *******3497 or email cus******@******.au for more information.
T’s & C’s
Please note, there is a $20 warehouse fee on all orders, and if paying by credit card, we have to add 1.7% (it goes straight to the ANZ, not us).
If you have any TECHNICAL questions, phone Gavan on *******8477.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards. Our catalogue shows this picture on EVERY CAR LIFT. BEWARE: Registration with WH&S in states other than Queensland does NOT mean this testing has been done, it merely registers a design.
Check our customer reviews http://happ.com.au/blog/
Follow us Insta: https:://www.instagram.com/happ_australia/
https://www.facebook.com/HappAutoHoists/
- Date Listed:23/04/2024
- Last Edited:23/04/2024
- Condition:New
- Warranty:Yes
Similar Ads
- 2 POST CLEAR FLOOR HOIST 4 TONNE CE INTEREST FREE TERMS*FREE DEL***SIX MONTHS INTEREST FREE UNTIL THE END OF JUNE TAA BUY DIRECT FROM THE IMPORTER - AND SAVE 30% UNDOUBTABLY THE BEST VALUE FOR MONEY IN AUSTRALIA. OUR LIFTS ARE NOT THE CHEAPEST FOR A REASON, WE BUILD THEM TO SUSTAIN THE TOUGH AUSTRALIAN CONDITIONS. THIS MANUFACTURER HAS BEEN SUPPLYING THE AUSTRALIAN MARKET FOR OVER 30 YEARS. MADE TO EURO AND AUSTRALIAN STANDARDS, BUT AT AN AFFORDABLE PRICE CONTACT US TO SEE IF YOUR POST CODE IS ELIGIBLE FOR FREE DELIVERY The AECL240CF clear floor hoist is$3,450Meadowbrook, QLD•4w
- Holden Commodore 97 - 03 VT VX Statesman Ute HSV Monaro Dash MatHolden Commodore & Versions Dashmats Hit More Plus tab to read full add Total 8 Differant ones PRICED FROM $25.00 XXX To suit WITHOUT Passenger Air Bag XXX 1 x Dark Grey , overall good condition, no fraying or stains $25.00 2 x Charcoal Overall VERY good Condition , no fraying or stains $25.00 Each 1 x Light Grey, good condition no fraying $25.00 XXX To suit WITH Passenger Air Bag XXX 2 x NEW 1 - Grey & 1 - Charcoal $35.00 Each 1 x Charcoal, As New missing$25Mount Gravatt, QLD•358w
- Holden Commodore Key Buttons - Remote control button repair kitAre your Commodore car key buttons worn out or broken? Don't worry, you don't have to buy a new key for $120 - $150! Just replace the buttons and you're good to go! No need to open up your key, No need to reset or configure your key electronics. Simply remove your old worn out rubber buttons and push in the new ones. All from the outside of the key. Get these high quality replacement buttons now for a fraction of the cost of a new car key! Suitable for any Holden Commodore Berlina, Capric$19Newstead, QLD•224w
- AUTOMATIC TRANSMISSION FLUID EXCHANGE AEATFT6B-PLUSThe transmission oil will go bad after a prolonged period using of auto transmission, If you can't exchange the oil on time, it may causes the gearbox work abnormality. In the past, you need to spend more than 1 hour to disassemble multiple parts of the automatic transmission to drain the waste oil, and you didn’t know how many liters oil you should add into the transmission. If you add too much or too little, the transmission may be damaged. By using this machine, yo u can exchange th$1,181Meadowbrook, QLD•1w
- Isuzu MUX DMAX 12 - 17 Dash Mat DashmatIsuzu MUX & DMAX Dash Mat Hit More Plus tab to read full add. I Only, Black, velour, moulded style, overall very good condition, no stains, rips. Edging all intact, bit fluffy in sections. Suits both Vehicles with Lift up Dash Compartment MUX 11/2013 - 01/2017 LS-M / LS-U DMAX 07/2012 - 02/2017 TFR85J TFS85J MY12 LSU / LS $30.00$30Mount Gravatt, QLD•289w
- Toyota Yaris Hatch 11 - 20 Deck Board Spare Wheel Boot Cover FloorGENUINE Toyota Yaris Deck Boards Spare Wheel Boot Cover Floor Hit More Plus tab to read full add Have both Versions, check part numbers on add with Vin with Dealer to confirm correct item. Choice of 7, The piece you lift in boot that covers spare wheel well, with inbuilt handle. Sits directly above spare wheel, not the parcel shelf, which sits much higher, do also have parcel shelves. P/N 58410-52090-B0 $70.00 Each Negotiable 1 Only, More involved piece with fold up flaps, all intact ,$70NegotiableSlacks Creek, QLD•460w
- Peugeot 308 T7 07 - 13 Parcel Shelf Tray with Storage Luggage BootGENUINE Peugeot 308 Parcel Shelf Tray with Storage Compartment 1 Only, Black in excellant condition, all intact, with lift off top , Storage Compartment under. Not sourced from Wreckers car, stored indoors, clean. ready to clip into car. Suits 308 Series 09/2007 - 12/2013 $230.00 Negotiable$230NegotiableSlacks Creek, QLD•25w
- Fuel tank & car panel Chemically dipping & RestorationThis seems to be a very IMPORTANT part of your restoration that gets overlooked or taken too lightly. Many don’t realise just how much dirt,rust, water & foreign materials ETC. are in these old fuel tanks & sender units,that have been sitting around for many years. Check out my photos & videos. When you’ve spent many years & heaps of money restoring your pride & joy you want reliability, to be able to jump in anytime & go for a Cruise, not broken down on the side of the road, or parked up in$12,345Logan Village, QLD•49w
- Toyota yaris logo Emblem, I can post it,Yaris Emblem logo, Used like new ready for your car 🚗 comes with special tape$10Acacia Ridge, QLD•101w
- Mazda CX7 06 - 12 Cargo Cover Blind Luggage Boot CoverGENUINE Mazda CX7 Retractable Cargo Cover Blind Have 12 x Black & 2 x Beige Units All in full working order, nothing missing or broken, no stains, rips, tears, creases in the blinds. Most just couple scuffs on housings. Black Units, Two in As New condition, one not far behind, balance have couple scratches. One only has small hole in blind. One Unit has staining on Blind part. $130.00 Each Negotiable 2 Off Beige units hard to find, both As New condition. $140.00 Each Negotiable$130NegotiableSlacks Creek, QLD•445w
- SPECIAL! 4T car hoist 1.9mtr lift HAPP40P Bris or freight 5*GoogleSAVE $200 while stocks last complimentary ramps also included - call for stock and availability Can view in Willow Vale. Review from Rait P - https://happ.com.au/rait-pinnak-happ40p-2-post-clear-floor-asymmetric-arms/ See our 5 Star Reviews on Google! GST INC AND COMES WITH A 3 YR WARRANTY We are proud to announce that after extensive detailed structural analysis, cost and time, the HAPP40P model is available with Australian Standards certification and can easily be registered with WH&$3,690Hendra, QLD•3d
- Tyre machine Combo HAPP TC10 WB10 perfect for race car / home workshop$180 savings for the combo pack! Perfect for the beginner or those doing race car tyres or if you are a small workshop. In stock and ready to sell as a combo SAVE $180!! TC10 – Swing Arm Tyre Changer – $1490 gst inclusive individual price The TC 10 is our most cost effective tyre changer, used a lot by race car drivers, enthusiasts and small workshops that don’t have time to take tyres to other shops and wait for the job. It can be fitted with the optional top assist arm for difficult tyres suc$2,690Hendra, QLD•4d
- $390 DISCOUNT! Car Hoist 4T 2 post HAPP 60P Bris 240v w/FREE ramps!SAVE $390! was $3690, on sale for $3300! FREE ramps with this model! While stocks last GST INC WITH A 3 YR STRUCTURAL WARRANTY - https://happ.com.au/warranty/ MADE NEARLY ENTIRELY WITH ROBOTS, THE LASTEST TECHNOLOGY OF CNC MACHINING AND POWDER COATING, AND MADE BETTER BY OUR GEN 2 ASYMMETRICAL ARMS. The HAPP 60P is a great choice for users with infrequent use of the lift. It has a low column height for low ceilings and provides a cost effective lift with full HAPP reliability. Great for enthusi$3,300Hendra, QLD•4d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3497