96 views
FlashForge Creator Pro 2 IDEX 3D Printer- Ex-Demo
$500
This Ex-Demo machine is near new with only 14 hours! Comes with 1 spare bed tape and 30days of warranty.
This update to the venerable Creator Pro adds twin independent Extruders for clean dual extrusion, mirror printing and duplication printing of 2 parts at the same time.
As an upgraded version of the classical Creator series, with the Independent dual extruder (IDEX) system, the Flashforge Creator Pro 2 IDEX provides beginners with higher quality twin extruder printing in an easier to use system.
Key Features:
Independent Dual Extruders - allowing easy Duplication (printing 2 of the same model at the same time) and Mirror printing (printing mirror image prints at the same time Like the left and right shoe when you only have the left shoe model)
Mirror Mode - Print 2 mirrored models at the same time
Duplicate Mode - Print 2 of the same model at the same time
Soluble Support Mode - Print support structures in a different material to model
Multi-Material Print Mode
Heated Bed/Platform - for ABS
Simplified Materials - designed for non-abrasive, limited material types, but not locked into any brand. This machine makes printing more easily learned by beginners
Materials It Can Print With: Only extrudes to 240c, Bed 120c. Flashforge only recommends PLA, Pearl PLA, PVA, ABS, ABS Pro, HIPS .
Regarding Abrasives: This machine is not designed for abrasives
Regarding FLEX: The last update allows you to adjust print speed on the fly, but at the time of writing you can not change load temp and speed so this makes flex difficult. We ran load and stopped immediately on filament out of nozzle, then printed flex at 20mm/sec on base, 1st layer at 10mm/s, max travel 60mm/s; retraction rate of zero.
Calibration in X Y and Z Building in calibration routines allow you to fine tune your machine easily through the screen interface
Other Features of the Creator Pro 2 (IDEX)
Touchscreen interface - colour touchscreen for easy navigation and control
Enclosed printed chamber
Metal frame for stable working performance
Specifications
Build volume: 200x148x150mm
Layer resolution : 0.1 - 0.4mm
Nozzle diameter: 0.4mm
Max temperature of extruder: 240c
Net Weight : 15kg
Machine size: 52.6 X 36 X 55 cm
Communication options: SD Card, USB cable
Software: Flashprint (free)
Working environment : 18-30 deg c
Noise: 55db
This update to the venerable Creator Pro adds twin independent Extruders for clean dual extrusion, mirror printing and duplication printing of 2 parts at the same time.
As an upgraded version of the classical Creator series, with the Independent dual extruder (IDEX) system, the Flashforge Creator Pro 2 IDEX provides beginners with higher quality twin extruder printing in an easier to use system.
Key Features:
Independent Dual Extruders - allowing easy Duplication (printing 2 of the same model at the same time) and Mirror printing (printing mirror image prints at the same time Like the left and right shoe when you only have the left shoe model)
Mirror Mode - Print 2 mirrored models at the same time
Duplicate Mode - Print 2 of the same model at the same time
Soluble Support Mode - Print support structures in a different material to model
Multi-Material Print Mode
Heated Bed/Platform - for ABS
Simplified Materials - designed for non-abrasive, limited material types, but not locked into any brand. This machine makes printing more easily learned by beginners
Materials It Can Print With: Only extrudes to 240c, Bed 120c. Flashforge only recommends PLA, Pearl PLA, PVA, ABS, ABS Pro, HIPS .
Regarding Abrasives: This machine is not designed for abrasives
Regarding FLEX: The last update allows you to adjust print speed on the fly, but at the time of writing you can not change load temp and speed so this makes flex difficult. We ran load and stopped immediately on filament out of nozzle, then printed flex at 20mm/sec on base, 1st layer at 10mm/s, max travel 60mm/s; retraction rate of zero.
Calibration in X Y and Z Building in calibration routines allow you to fine tune your machine easily through the screen interface
Other Features of the Creator Pro 2 (IDEX)
Touchscreen interface - colour touchscreen for easy navigation and control
Enclosed printed chamber
Metal frame for stable working performance
Specifications
Build volume: 200x148x150mm
Layer resolution : 0.1 - 0.4mm
Nozzle diameter: 0.4mm
Max temperature of extruder: 240c
Net Weight : 15kg
Machine size: 52.6 X 36 X 55 cm
Communication options: SD Card, USB cable
Software: Flashprint (free)
Working environment : 18-30 deg c
Noise: 55db
- Date Listed:01/04/2024
- Last Edited:02/04/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Flashforge Adventurer 3 Pro 3D Printerwill throw in PLA and stand (broken wheel) comes with original packaging$500St Peters, NSW•5w
- 3D Printer Flashforge Adventurer 3Flashforge 3 barely used. Good entry level 3d printer$150Beverly Hills, NSW•5d
- HP OfficeJet Pro 6230 e Inkjet Printer Wireless Photo-Run out Ink DemoLocal Pick up from Mount Waverley 3149 or Chadstone 3148 This's Demo item. only run out ink (without box), Excellent Condition as new still have film on printer. (including Power cabel. you can download software on offical website) Print only, wireless Print speed ISO: Up to 18 ppm (black), up to 10 ppm (color) Auto duplex printing; Borderless printing High yield ink available Dynamic security enabled printer 2-sided printing Allows you to print on both sides of the page, cutting your paper$59.95Kemps Creek, NSW•38w
- Konica Minolta C4070 Production Printer (Excellent Condition)PRODUCT DETAILS You are Purchasing a Konica Minolta Production Printer. Konica Minolta AccurioPrint C4070 Production Printer (Demo machine with 15K page count!) Performance and colour quality that will impress and is designed to handle the requirements of professional and on-demand printing. This machine has the KM Printer Controller IC609! The AccurioPrint C4070 is ideal for high-quality colour production printing. It has print speeds of up to 71 ppm and the flexibility to handle a wide$59,900NegotiableMacquarie Park, NSW•4d
- Wireless Lavalier Microphone For Phone Android iPhone ipad Vlog LiveWireless Lavalier Microphone For Phone Android iPhone ipad Vlog Live Stream Mic (please specify andriod or iphone) Wireless Lavalier Microphone for iPhone Android Phone Wireless Mic Recording Designed for Youtube/Facebook Live, TikTok Creators, Vlogger, Blogger, Podcasters, interviewers and other video recording enthusiasts. Interview-Auto Sync, Noise Reduction, NO APP or Bluetooth Needed 1.Compatible with: Lavalier microphone can be used with iPhone7 7 Plus,8 8 Plus,X,XR,XS,XS Max,11$39Sydney City, NSW•105w
- Creality Ender 5 Pro 3D Printer with CR Touch in custom enclosureCreality Ender 5 Pro 3D Printer with CR Touch in custom enclosure from IKEA Lack 32-bit Silent board installed, will also include old board Newly installed CR Touch, firmware already setup and working as it should, new PEI plate Also included glass plate Enclosure is not tidy but it does the job, but you can also revert back to original and throw away the enclosure if you only print PLA or PETG I don't have room anymore hence selling$270Blacktown, NSW•8w
- HP OfficeJet Pro All-in-One Printer COLOUR/B&WHP OfficeJet Pro 7740 Wide Format All-in-One Printer-lightly used! Ability to Scan, Print, Copy, Fax -LED interface makes it easy to use -damage-free scanning surface - Print, scan, fax and copy documents of up to A3 size - 2 paper trays, each with a capacity of up to 250 sheets, totalling 500 pages. -It has an automatic document feeder with a 35-sheet capacity. - Wireless printing- from your computer or your phone/tablet! Purchased last year from Officeworks for $295. Comes with user ma$110NegotiablePyrmont, NSW•2w
- Brand New HP Envy Pro 6420 All-in-One PrinterGrab a bargain with this unopened, brand new HP Envy Pro 6420 All-in-One Printer. Whether you’re working from home or managing family tasks, this printer is the perfect addition to your setup. Features: Print, Scan, Copy: All from one device with easy setup. Wireless Connectivity: Dual-band WiFi with self-healing for a reliable connection. Efficient Printing: Speeds of 10 ppm for black and white, 7 ppm for color. High Resolution: Up to 4800 x 1200 dpi for crisp, clear prints. Smart App Compat$100Five Dock, NSW•2w
- Projet 1200 Micro Sla Pro 3D Printer New In Box White033900188184 Brand new in a box Measurement: 43 mm x 27 mm x 180 mm Brand: Projet Model Name: 1200 Micro Sla Pro 3D Printer New In Box Colour: White A professional grade 3D printer that has a curing system that can make 3D models even jewellery models ready for casting. Electronic items are tested (unless sealed) with a 30-day warranty. Games, video and audio media have a 7-day warranty. All items can be picked up in our Fairfield NSW store. Exchanges and refunds can only be given where g$2,499Fairfield, NSW•74w
- Creality HALOT-MAGE PRO 8K Resin 3D Printer Combo KitPurchased on the 30 Jan 2024, done a few prints, decided that it's not for me and selling as a kit as purchased, with a few extras thrown in. Cleaned prior to being re-packaged in original packaging. In excellent working condition, has signs of normal use. Kit includes, Additional Creality Camera for remote monitoring via Creality App, 2 x Fast Grey Resin (1 x new, the other about 1/3 full), 1 x new bottle Fast Blue Resin, all resin is Creality branded. Big packet of resin filters and scrapers$700North Ryde, NSW•6w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3928