80 views
DA216S Distribution Line Amplifier Distribution Line Amplifier
$100 Negotiable
SHIPPING OFFERED
As pictured in rack(now in storage)
VGC
$100 ONO
The Rane DA216S Distribution Amplifier is a two-input, sixteen-output splitter/distribution amplifier. The DA216S is capable of providing sixteen discrete balanced outputs from one or two balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the sixteen screwdriver Output Level controls on the front panel. Each output may be assigned to either or both inputs via front panel accessible slide switches.
The Master A and B Level controls affect the overall level of each input. In other words, they allow all assigned outputs to be turned up or down at once. LEDs indicate an Overload (OL) at either the inputs or at the internal gain stages.
Each input is set to either Mic or Line level via the rear panel Input Pad pushbutton. The separate Input Gain pushbutton switches provide a microphone input with 60 or 40 dB of gain, or a line input with 20 or 0 dB of gain. With Input Gain, Master Levels and Output Levels, any reasonable input signal may be adjusted to a nominal 4 dBu and still have 17 dB of headroom. The Phantom Power switch provides 15 VDC for condenser microphones. Any input assigned to line-level has this phantom voltage turned off automatically. A rear-panel LED indicates when the Phantom Power is engaged.
Each output stage incorporates a high-current balanced output line driver for driving long lines with optimal performance. Euroblock wire range is #14 to #26 stranded or solid. The DA216S incorporates a 100-240 VAC internal universal voltage power supply, operable nearly anywhere in the world.
VGC
$100 ONO
The Rane DA216S Distribution Amplifier is a two-input, sixteen-output splitter/distribution amplifier. The DA216S is capable of providing sixteen discrete balanced outputs from one or two balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the sixteen screwdriver Output Level controls on the front panel. Each output may be assigned to either or both inputs via front panel accessible slide switches.
The Master A and B Level controls affect the overall level of each input. In other words, they allow all assigned outputs to be turned up or down at once. LEDs indicate an Overload (OL) at either the inputs or at the internal gain stages.
Each input is set to either Mic or Line level via the rear panel Input Pad pushbutton. The separate Input Gain pushbutton switches provide a microphone input with 60 or 40 dB of gain, or a line input with 20 or 0 dB of gain. With Input Gain, Master Levels and Output Levels, any reasonable input signal may be adjusted to a nominal 4 dBu and still have 17 dB of headroom. The Phantom Power switch provides 15 VDC for condenser microphones. Any input assigned to line-level has this phantom voltage turned off automatically. A rear-panel LED indicates when the Phantom Power is engaged.
Each output stage incorporates a high-current balanced output line driver for driving long lines with optimal performance. Euroblock wire range is #14 to #26 stranded or solid. The DA216S incorporates a 100-240 VAC internal universal voltage power supply, operable nearly anywhere in the world.
- Date Listed:21/03/2024
- Last Edited:17 hours ago
- Condition:Used
- Shipping:Shipping & Pickup
Similar Ads
- TU-8200R ELEKIT STEREO TUBE AMPLIFIER BUILDTU-8200R Tube amplifier BUILD This is new version of TU-8200R Discover the differences in listening pleasure with the flexibility of various power tubes and output modes. This is a single power amplifier using natural sounding and powerful 6L6GC tubes. Here below are the main features of this power amplifier. [Features] - Comes with 6L6GC power tubes, but also supports wide range of power tubes, such as KT88, KT90, KT666, EL34, etc. - A newly developed "Active automatic bias adjustment func$1,800Westminster, WA•413w
- PA Strong PA4120E Public Address Mixer Amplifier (120W RMS)Selling this PA Strong PA4120E Public Address Mixer Amplifier (120W RMS). In good working condition and plenty of power (120 Watts RMS). It features five inputs are, one balanced microphone input with voice operated priority over all other inputs, two unbalanced microphone inputs and two auxiliary inputs for background music. Also Separate bass, treble and individual volume controls for all inputs are located on the front panel. 100 Volt line or low impedance loudspeakers may be used. This ampl$250NegotiableMelville, WA•190w
- Yamaha AVR-S80 5.1 Chn Home Theater System Receiver AmplifierSelling this YAMAHA AVR-S80 5.1 Channel Home Theater Cinema System AV Receiver Amplifier. It is in good working condition, exterior have seen better days and it is missing one of the tuning button (you can use toothpick to press the button). This particular receiver has 5.1 channel surround that sounds great, a reasonable number of connections and fairly easy to operate. The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are wel$100NegotiableMelville, WA•159w
- DSPeaker Anti-Mode 8033 - You Need Room Correction For Your Subwoofer!Why do you need a DSPeaker Anti-Mode 8033? A typical listening room resonates in low frequencies. Because of this, even the best subwoofer may not sound good enough. Much of the audio content get masked by the resonances, introducing unwanted characteristics such as "slowness" and "boominess" to the sound. This problem is most pronounced when subwoofer is placed close to walls or corners of the room. The Golden Ear awarded Anti-Mode™ technology eliminates the resonances of the speaker and the$255NegotiableNorth Perth, WA•16w
- Rotel Michi P5 PreampliferBefore starting this review of Rotel's Michi P5, the 60-year-old, Japan-based audio company's recent preamplifier design, I thought it appropriate to consider "What is an audio preamplifier? What should it do?" There are plenty of opinions to be found at stereophile.com: "What a preamp ought to do, apart from changing volume and switching sources, is as little as possible," wrote Stereophile Editor Jim Austin in his 2017 review of the PS Audio BHK Signature preamplifier. And yet "the preampli$6,000NegotiableCloverdale, WA•4d
- Restored Sansui AU-555 Vintage Integrated Amplifier••Stunning Restored Sansui AU-555•• •Near mint cosmetic condition, A very clean example manufactured July 1968. •All functions are working perfectly. •A very nice sounding little amp displaying that sweet Sansui sound and punching well above it’s weight. •Recently serviced and overhauled with the following work completed: - all electrolytic capacitors replaced using quality new nichicon and wima parts. - Resistors and diodes in power supply section replaced. - All small transistors in pre amp$700SHIPPING OFFEREDBaldivis, WA•15m
- TOSHIBA KT-216C Cassette Recorder (faulty)Selling this vintage TOSHIBA KT-216C Cassette Recorder. It does not turn on, ideal for parts or repair. You are welcome to inspect the item and please ask all questions before buying. Photos is the actual item and will be sold as is. Thank you. Product Information: Country: Japan Year: 1980's Type: Portable Cassette Recorder Power Source: AC 240V or Batteries Dimensions: 285W x 75D x 195H mm Weight: 1.5kg Visit and like us on Facebook (Vintage Audio, Perth Australia) - www.facebook$25NegotiableMelville, WA•378w
- PREMIUM PHONO PRE AMPLIFIER WITH INPUT LOADING -MMPhono pre amplifier This is custom hand build phono pre amplifier with individually pickup high quality parts assembled in Australia. Ultra low ripple power supply build with premium audio grade Nichicon gold capacitors Pre amplifier use OPA 2134 Op amplifier easy upgrade for any other descrete op amps. Input load capacitor can be change default 0 capacitance Input load resistance can be change 2 gain levels External power supply keep minium noise induction to the amplifier section Total Harmo$350Hamersley, WA•184w
- Gold Plastic Feet Stands for AV Receiver Amplifier Audio EquipmentSelling this Gold Plastic Feet Stands for AV Receiver Amplifier Audio Equipment (55 x 15 mm). It is in good condition. The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are welcome to inspect the item and please ask all questions before buying, it will be sold as is. Thank you.$30SHIPPING OFFEREDNegotiableMelville, WA•92w
- Assorted Universal Plastic Feets Stand for AV Receiver AmplifierPrice is for one set of feets (four). Selling these Assorted Universal Plastic Feets Stand for AV Receiver Amplifier Audio Equipment. This listing of for one set of feets (four) and they are in good condition. The photos you see of the items on our site are of the condition and actual unit available that you will receive. You are welcome to inspect the item and please ask all questions before buying, it will be sold as is. Thank you. 1. Black Feets (35 x 15mm) 2. Gold Black Feets (50 x$30SHIPPING OFFEREDNegotiableMelville, WA•92w
- Baby Kids Swing SetBaby Swing Set Plum Brand In good condition Can be dismantled for transport. $30 / can deliver.$30SHIPPING OFFEREDNegotiableLesmurdie, WA•2d
- 400 x 400 x 30 Ice PaversWhite Pavers 400 x 400 x 30mm Brand new, qty 15 full available $10ea or $100 the lot and can deliver.$10SHIPPING OFFEREDNegotiableLesmurdie, WA•6d
- Rane ME-60 Dual Channel 30-Band MicroGraphic EqualizerDual chanell EA for AB inputs. Photo of unit in rack (now in storage) Discontinued $120 ONO. Dual channel 30 band 1/3 octave graphic equalizer with Constant-Q filtering Interpolating filter response 20mm center detent sliders /-12 dB boost and cut range Adjustable low/high pass filters Variable input level controls Clip level indicators RFI filters Active balanced input and output connections$120SHIPPING OFFEREDNegotiableMaida Vale, WA•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 6089