230 views
Sansui SR-929 High End Turntable Record Player Vinyl Direct Drive
$2,200
***IF THE AD IS UP IT IS AVAILABLE***
Comes in original box.
Hiighly sought after Sansui SR-929 top of the line record player. Made in Japan.
Just been serviced including new tone arm wires.
Audition for serious buyer welcomed.
There is a small defect near the tone arm attachment which would fill up nicely with some clear epoxy- I doubt you would see it at all then.
Comes with original headshell but no cartridge.
Specs taken from https://www.vinylengine.com/library/sansui/sr-929.shtml
Type: two-speed, quartz-servo, direct-drive, manual turntable
Motor: 20-pole, 30-slot DC brushless type with built-in frequency generator
Drive system: direct spindle drive, quartz servo controlled
Platter: 302mm, 1.4kg, aluminium die-cast
Wow and flutter: less than 0.028% WRMS
Signal to noise ratio: better than 66dB
Speeds: 33 and 45rpm
Fine speed adjustment: -3.5%
Tonearm: statically balanced, s-shaped tonearm
Effective length: 240mm
Overhang: 15.6mm
Cartridge weight range: 2 to 11g (11 to 21g with sub-weight)
Dimensions: 490 x 173 x 381mm
Weight: 17.1kg
Comes in original box.
Hiighly sought after Sansui SR-929 top of the line record player. Made in Japan.
Just been serviced including new tone arm wires.
Audition for serious buyer welcomed.
There is a small defect near the tone arm attachment which would fill up nicely with some clear epoxy- I doubt you would see it at all then.
Comes with original headshell but no cartridge.
Specs taken from https://www.vinylengine.com/library/sansui/sr-929.shtml
Type: two-speed, quartz-servo, direct-drive, manual turntable
Motor: 20-pole, 30-slot DC brushless type with built-in frequency generator
Drive system: direct spindle drive, quartz servo controlled
Platter: 302mm, 1.4kg, aluminium die-cast
Wow and flutter: less than 0.028% WRMS
Signal to noise ratio: better than 66dB
Speeds: 33 and 45rpm
Fine speed adjustment: -3.5%
Tonearm: statically balanced, s-shaped tonearm
Effective length: 240mm
Overhang: 15.6mm
Cartridge weight range: 2 to 11g (11 to 21g with sub-weight)
Dimensions: 490 x 173 x 381mm
Weight: 17.1kg
- Date Listed:10/02/2024
- Last Edited:10/04/2024
- Condition:Used
- Shipping:Pickup Only
- HQ Monaro Coupe Complete Car Factory V8 4 Speed Manual not GTS or LS**IF THE AD IS UP IT IS FOR SALE** Please be respectful. Lowballers and trade offers will not receive a response. Selling due to house purchase. 1972 HQ Monaro, factory 253 V8 4 on the floor. All 3 original tags , body # (Sydney car) and chassis original and matching- however no motor or gearbox. 80437 (253 Coupe) Dublin Green flax interior. Holden Historical Services Report provided to buyer. It's all there, just needs some panels welded in, paint and putting back together. All original$52,500NegotiableMandurah, WA•2w
- Genuine HQ Holden GTS Guard Drivers side suit Monaro Coupe etc.***IF THE AD IS UP IT IS AVAILABLE*** Genuine HQ Holden GTS Guard Driver's side (not weld in). Needs work a per pictures but it's original and worth fixing.$375Mandurah, WA•69w
- Holden 304 5.0 VT Roller Heads***IF THE AD IS UP IT IS AVAILABLE*** Set of VT heads, came off running engine, no damage, not been skimmed or played with- stock heads. $625 pickup. $725 freighted to a depot near you.$625Mandurah, WA•103w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
1 offer has already been made