40 views
Genuine Ssangyong Musso Sway Bar Tie Rod and ball joint New Old Stock
$10 Negotiable
G’day
I have a sway bar tie rod link and ball joint for a Mercedes engine SSANGYONG MUSSO 4WD WAGON 98-02. This is a genuine part, brand new old stock. SWAY BAR LINK ASSY: 4475005000 4475005001 OEM part numbers according to the Internet....which can be trusted for everything
I had one of these 3.2 litre Mercedes powered beasts back at the turn of the century, and snapped the tie rod to the front sway bar while out in Western NSW. I ordered 2 to be shipped, just in case. Anyway, not quite 12 months later, the vehicle came to an unfortunate end in a small gully as the only option for avoiding a not at fault head on. While the occupant survived and emerged uncathed, the vehicle was a total writeoff.
Fast forward to today, while cleaning up, I found this in the back of my tool chest. Figured it would be of use to someone. These cost $30-40 each new special order. $10 and it’s yours. Will post at cost.
Thanks for looking
I have a sway bar tie rod link and ball joint for a Mercedes engine SSANGYONG MUSSO 4WD WAGON 98-02. This is a genuine part, brand new old stock. SWAY BAR LINK ASSY: 4475005000 4475005001 OEM part numbers according to the Internet....which can be trusted for everything
I had one of these 3.2 litre Mercedes powered beasts back at the turn of the century, and snapped the tie rod to the front sway bar while out in Western NSW. I ordered 2 to be shipped, just in case. Anyway, not quite 12 months later, the vehicle came to an unfortunate end in a small gully as the only option for avoiding a not at fault head on. While the occupant survived and emerged uncathed, the vehicle was a total writeoff.
Fast forward to today, while cleaning up, I found this in the back of my tool chest. Figured it would be of use to someone. These cost $30-40 each new special order. $10 and it’s yours. Will post at cost.
Thanks for looking
- Date Listed:25/04/2022
- Last Edited:25/04/2022
- Condition:New
- Body Type:SUV
- Model:Musso
- Make:Ssangyong
Similar Ads
- BMW M2/M3/M4 BRAKE CALIPERS ROTORS DISC BRAKES BMW 2020 OEM ONLY 3500KFor sale is 2020 M2 Competition Calipers and Rotors. DONOR VEHICLE: 2020 M2 COUPE RWD MILES: 3500kms We have others in stock: $3000 shipped. With 10k kms on them. $2500 shipped with 30k kms on them. $2200 shipped with 65k kms on them. Message us or call for parts availability and prices. Photos for illustration purposes. Provide vehicle VIN (17 Characters) or Rego/plate number for parts compatibility (Australian only). Trading hours: Mon-Fri: 9 am-5 pm Sat & Sun: Close$4,000Sydney City, NSW•199w
- GWM TANK 300 LIFT KIT NITRO 2.5INCH2.5INCH FULL KIT NITRO REMOTE RESERVOIR HARDCORE SERIES TOP TIGER RACING AUSTRALIA FULL KIT COMES WITH ALL COMPONENTS TO CORRECT THE PROPER LIFTED GEOMETRY!!! Don't stress out your factory ball joints or link bushings. Dont ruin your geometry and ruin the tyres or wheel alignment. HI STRENGTH BALL JOINTS AND CONTROL ARMS panhard rod ,sway bar links,shocks, springs full package deal !!! Nitro fully ADJUSTABLE SHOCKS!!! 2.25inch wide nitro shock tubes Both damper rate and front height ad$3,600Wetherill Park, NSW•17w
- Sway Bar Links and Ball Joints HD Elantra and FD I30For sale are two off Moog brand Ball Joints (front) and Sway bar links (front). Units are greaseable and come with bolts and grease fittings. Ball joints also come with split pins, castle nut and Loctite as well. Units are new in unopened packaging. These would also suit an HD Elantra. No PayId. Pickup only and cash. Serious buyers only. No longer required.$135Ambarvale, NSW•4w
- Suspension Ball Joint Tie Rod Ends Idler Arm KIT For Nissan NavaraFitment Fit For Nissan Navara D22 4/1997-11/2005 incl.: DX, Standard, ST-R 4X4 2door Cab Chassis Fit For Nissan Navara D22 1999-11/2005 incl.: ST-R 4X4 2door Utility Fit For Nissan Navara D22 4/1997-11/2005 incl.: DX, ST, ST-R 4X4 4door Utility Dual Cab Note: Please Confirm Tie Rod End Threads Size 2 x M14x1.5 RHT / 15.10mm BLD 2 x M14x1.5 LHT / 15.10mm BLD Package 2 x Upper Ball Joints 2 x Lower Ball Joints 2 x Inner Tie Rod Ends 2 x Outer Tie Rod Ends 1 x Idler Ar$259Smithfield, NSW•22w
- BA BF XR6 XR8 front suspensionFord XR 8 Nolathane Part No: 45342X I New and 1 nearly new. Front Control Arm Upper - Camber Custer Adjustable. 3089 ( 2 x Red Round ) TRW: JBJ 7526 x 2 Ball Joint Front Axle (18.7mm) front lower ball joint JBJ 7527 x 1 Ball Joint Front Axle (17.9mm} front upper ball joint JTE 7574 x 2 Tie Rod End Front Axle Check photos Was bought for BF XR8, 9 years ago. Car sold. Left over from garage. Suit BA BF over $400 worth new today from repco. l$200NegotiableHaberfield, NSW•115w
- Mercedes W107, W114 - W140 Self Level Height Contrl Rod -123 320 14 89Is your hydro pneumatic self-levelling system playing up? Back end not staying up, or the sitting low? Control rod out of adjustment, ball joints sloppy or perhaps it’s missing completely? Time to change the Height Control Rod with a genuine Mercedes Benz replacement unit. This part is shown as no 44 in the parts diagram attached. Will suit the following MB Vehicles: • W107 SL (1970 to 1989) • W107SLC (1972 to 1981) • W114 Sedan (1968 to 1976) • W114 Coupe (1969 to 1976) • W115 Sedan (1968 to$157.50Bossley Park, NSW•19w
- X-6 PCS FRONT SUSPENSION KIT/SET FOR HOLDEN VF COMMODORE ALL MODELS V6X-6 PCS FRONT SUSPENSION KIT/SET X-6 PCS Front Lower Control Arms SWAY BAR LINK PINS Stabiliser Bush Kit DRIVER SIDE RIGHT AND PASSENGER SIDE LEFT NEW COMPLETE WITH BALL JOINTS BUSH'S FOR HOLDEN COMMODORE VF EVOKE CALAIS V6 V8 SS SV6 SSV SV8 HSV GTS CLUBSPORT SENATOR MALOO R8 REDLINE SEDAN WAGON UTE V6 V8 COMES WITH 2 YEARS WARRANTY$450Smithfield, NSW•50w
- GWM TANK 300 LIFT KIT 2 INCH OFF ROADHeavy offroad 2 inch lift kit for TANK 300 Full kit designed to correct the geometry when lifted . Adjustable nitro shocks Full kit Springs Nitro shocks damper Adjustable front height adjustable Sway bar links Control arms with stronger ball joints Toptiger racing is a famous racing off road company manufacturing , promoting ,dominating ASIA. Thailand ,Malaysia,Korea and China , oceanic & Australia Fitting available please enquire TopTiger Racing Australia Pick up today !! 7 days! wee$1,999.99Wetherill Park, NSW•25w
- Heavy Duty SuperPro Sway Bar To Strut Link Set For Holden VT-VNSuperPro Sway Bar To Strut Link Set Bushing Kit For Holden Polyurethane Performance Suspension Bushings Fulcrum Suspension Part Number: 987 Kit Includes 8 x Blue Polyurethane Bushings All Washes & Bolts Needed As WellAs 2 x Metal Rods All Australian Owned & Manufactured Suspension Set Assist W/ The Following: -Constant Steering Geometry -Better In Road Handling & Control -Traction Control -More Responsive Steering -Longer Service Life Of Suspension Parts -Increased Tyre Life -Extra Off Road S$120Lugarno, NSW•33w
- OEM Honda s2000 rear knucklesBrand new in box OEM Honda rear knuckle assemblies for AP1 S2000. Both left and right side. Comes with lower ball joints installed already. The RHS knuckle is now discontinued. LHS is whatever new old stock is left in the warehouses in Japan so one of your last chances to get brand new knuckles. Got reinforced onces coming so don't need the OEM ones anymore. Selling for what they cost me to get them here. $900 Pick up south West Sydney 2570 or West Sydney 2175 Prefer pick up but may post aus$900Oran Park, NSW•2w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 5217