67 views
NEW LUCAS HEAVY DUTY OIL STABILIZER
$20
PICK UP ONLY FOR THE LUCAS HEAVY DUTY OIL STABILIZER BUT CAN BE POSTED WITH OTHER PRODUCTS.
LUCAS HEAVY DUTY OIL STABILIZER
6 NEW UNOPENED 946 ML BOTTLES $20 / BOTTLE
FOR ENGINES, GEARBOXES & DIFFS AS PER LUCAS USE INSTRUCTIONS.
"Can safely blend with all other automotive lubricants, synthetics, ATF and mineral oil."
It is recommended that you add the Oil Stabilizer (20% Stabilizer, 80% Oil). You may also use the stabilizer to top off between oil changes in order to help reduce oil consumption in an older engine, or maintain peak performance in a new engine.
In addition to being for your engine, you can also mix it 25% / 75% in a manual transmission and 50% / 50% in the differential. Lucas Oil Stabilizer blends with any petroleum-based or synthetic oil, and is formulated for gasoline or diesel engines.
In newer and smaller vehicles that require light weight oils such as 5W-30, we recommend our Pure Synthetic Oil Stabilizer. Pure Synthetic Stabilizer was developed specifically for engines that run on lighter weight engine oils and in newer vehicles.
Q: Can I use Pure Synthetic Oil Stabilizer in non-synthetic oil?
A: Yes, contrary to common belief, you can mix synthetic and non-synthetic oil. A common reason for doing so is if your vehicle requires a light weight oil like 5W-30. Pure Synthetic Stabilizer was developed specifically for engines that run on lighter weight engine oils and in newer vehicles.
DIRECTIONS FOR USE
Percentages listed is that of system capacity (example: 1 quart oil stabilizer with 4 quarts motor oil would be 20% of a 5 quart system capacity. Before using, be sure to check the system capacity of the application.
In engines: Use approximately 20% or one quart to each gallon of any plain motor oil. Petroleum, or synthetic.
In badly worn engines: Use more — up to 60% or 80% if necessary.
In differentials: Use 25% to 50%.
In badly worn or noisy differentials: Use 50% to 100%.
In industrial gear boxes: Use 25% to 50% for preventative maintenance and less power drain. If necessary, use 50% to 100% to stop leaks and overheating.
In light duty manual transmissions: Use 25%.
In heavy duty transmissions: Use 25-50%.
In transfer cases: Use 50%
In air compressors and lawnmowers: Use 20%
In Harley Davidson motorcycles: Use 25-30%
In 4 stroke motorcycles with wet clutches: Use 10%.
In 4 stroke motorcycles with dry clutches: Use 20%.
Will not void warranties when used as directed.
At temperatures below (-15℃) it is recommended to use Lucas Pure Synthetic Oil Stabilizer.
In Ford Powerstrokes, it is recommended to use one quart of Pure Synthetic Oil Stabilizer per oil change.
https://www.lucasoilcenter.com/shop/lucas-oil-products/engine-oil-additives/lucas-heavy-duty-oil-stabilizer/
https://lucasoil.com/faq
I've been using additives for around 45 years. Mainly over the last 30 years I've used many fuel & oil additives & other performance products & sold many automotive parts including additives, performance engine parts, tyres & racing ignition products.
This particular Lucas is product is pretty good for the applications it is designed for. I've used it myself in engines, gearboxes & diffs & found it quite OK.
But currently & since 1972 the PETRO TECH 2000 products I have for sale, have been & still are, the Number 1 engine & gear treatment products in the world. As are the fuel treatments. Unfortunately I didn't know about them 30 or more years ago.
If you are looking for products for use in vehicles & equipment that you are going to be using for a few years to decades or 100,000 kilometres to a million plus kilometres, or many tens of thousands of hours, please check out my ads on the PETRO TECH 2000 products, the FPC / FTC CONCENTRATE ENGINE DECARBONIZER & DPF CLEANER FUEL CATALYST, the DIESEL TREATMENT & INJECTOR CLEANER & the PETROL TREATMENT & INJECTOR CLEANER products I have available
Thank you.
For further information please ph 3 - 6 pm or leave a message with your number & time to call you back. Thank you
LUCAS HEAVY DUTY OIL STABILIZER
6 NEW UNOPENED 946 ML BOTTLES $20 / BOTTLE
FOR ENGINES, GEARBOXES & DIFFS AS PER LUCAS USE INSTRUCTIONS.
"Can safely blend with all other automotive lubricants, synthetics, ATF and mineral oil."
It is recommended that you add the Oil Stabilizer (20% Stabilizer, 80% Oil). You may also use the stabilizer to top off between oil changes in order to help reduce oil consumption in an older engine, or maintain peak performance in a new engine.
In addition to being for your engine, you can also mix it 25% / 75% in a manual transmission and 50% / 50% in the differential. Lucas Oil Stabilizer blends with any petroleum-based or synthetic oil, and is formulated for gasoline or diesel engines.
In newer and smaller vehicles that require light weight oils such as 5W-30, we recommend our Pure Synthetic Oil Stabilizer. Pure Synthetic Stabilizer was developed specifically for engines that run on lighter weight engine oils and in newer vehicles.
Q: Can I use Pure Synthetic Oil Stabilizer in non-synthetic oil?
A: Yes, contrary to common belief, you can mix synthetic and non-synthetic oil. A common reason for doing so is if your vehicle requires a light weight oil like 5W-30. Pure Synthetic Stabilizer was developed specifically for engines that run on lighter weight engine oils and in newer vehicles.
DIRECTIONS FOR USE
Percentages listed is that of system capacity (example: 1 quart oil stabilizer with 4 quarts motor oil would be 20% of a 5 quart system capacity. Before using, be sure to check the system capacity of the application.
In engines: Use approximately 20% or one quart to each gallon of any plain motor oil. Petroleum, or synthetic.
In badly worn engines: Use more — up to 60% or 80% if necessary.
In differentials: Use 25% to 50%.
In badly worn or noisy differentials: Use 50% to 100%.
In industrial gear boxes: Use 25% to 50% for preventative maintenance and less power drain. If necessary, use 50% to 100% to stop leaks and overheating.
In light duty manual transmissions: Use 25%.
In heavy duty transmissions: Use 25-50%.
In transfer cases: Use 50%
In air compressors and lawnmowers: Use 20%
In Harley Davidson motorcycles: Use 25-30%
In 4 stroke motorcycles with wet clutches: Use 10%.
In 4 stroke motorcycles with dry clutches: Use 20%.
Will not void warranties when used as directed.
At temperatures below (-15℃) it is recommended to use Lucas Pure Synthetic Oil Stabilizer.
In Ford Powerstrokes, it is recommended to use one quart of Pure Synthetic Oil Stabilizer per oil change.
https://www.lucasoilcenter.com/shop/lucas-oil-products/engine-oil-additives/lucas-heavy-duty-oil-stabilizer/
https://lucasoil.com/faq
I've been using additives for around 45 years. Mainly over the last 30 years I've used many fuel & oil additives & other performance products & sold many automotive parts including additives, performance engine parts, tyres & racing ignition products.
This particular Lucas is product is pretty good for the applications it is designed for. I've used it myself in engines, gearboxes & diffs & found it quite OK.
But currently & since 1972 the PETRO TECH 2000 products I have for sale, have been & still are, the Number 1 engine & gear treatment products in the world. As are the fuel treatments. Unfortunately I didn't know about them 30 or more years ago.
If you are looking for products for use in vehicles & equipment that you are going to be using for a few years to decades or 100,000 kilometres to a million plus kilometres, or many tens of thousands of hours, please check out my ads on the PETRO TECH 2000 products, the FPC / FTC CONCENTRATE ENGINE DECARBONIZER & DPF CLEANER FUEL CATALYST, the DIESEL TREATMENT & INJECTOR CLEANER & the PETROL TREATMENT & INJECTOR CLEANER products I have available
Thank you.
For further information please ph 3 - 6 pm or leave a message with your number & time to call you back. Thank you
- Date Listed:17/03/2024
- Last Edited:26/03/2024
- Condition:New
Similar Ads
- CAT Diesel Oil - 15W-40New Unopened 20ltr drums. Genuine CAT diesel engine oil. 15W-40 Surplus to requirements. Price is for per drum. 2 available.$100Hexham, NSW•3w
- Ryco oil filter for saleRyco oil filter for sale Z386 new not used. Suitable for lots of different brands of cars. Great buy $6 phone Maitland area$6Maitland, NSW•190w
- Vintage Golden Fleece Quart Motor Oil Bottle Top & Brake FluidGenuine Vintage Golden Fleece Quart Motor Oil Bottle Top & Brake Fluid Owned by an older family member since new Feel free to ask any questions $350 OBO Pickup Whitebridge 2290 Postage at buyers expense$350NegotiableNewcastle, NSW•32w
- Penrite premium oil 25w-40 15 litresPenrite oil 25w-40 Used 5 litres and sold boat$140Warners Bay, NSW•14w
- Oil filter spacersOil filter spacers taken off a Subaru BRZ, unsure the compatility with other vehicles. I can provide measurements if desired Used but in good condition $40 for both $4.99 for shipping$25Mayfield East, NSW•100w
- Gulf western torque oil TO-4 10WGulf Western Torque oil TO-4 10W 5 x20 litre drums available unopened eBay price $609 for 4 $130 each or nego for the 5 drums Selling as no longer have the machine I bought it for Pick up Stanhope nsw 2335$130NegotiableCardiff Heights, NSW•201w
- various automotive oilsVarious oils as shown in photos. Penrite Diesel 2L remaining $5. Valvoline Duragear full 4L container (never opened) $30. Penrite Racing Diff oil 3.5L (1 x full container plus another 1L remaining in the other container) $20. Take the lot for $40.$5Tanilba Bay, NSW•2w
- COOPER Z154 OIL FILTERSUITS HOLDEN & MANY MORE. WILL POST AT COST. I HAVE ABOUT 6 OF THESE & SOLD MY COMMODORE.$15NegotiableBrandy Hill, NSW•36w
- CAR A/C RE-GAS FREE COURTSEY CAR AUTO Air conditioning ACNewcastle hire and auto ****0001 -AC System check and R134A only used -AC system service valves replaced (common leaking spot) -System evacuation for better cooling -Oil added to your system and compressor for longer life and better cooling . -UV green dye added to pinpoint now and future leaks. Note - ALL CARS LEAK TESTED BEFORE REGAS NO REGAS UNLESS PASS LEAK TEST !!! -All of the above for $150 -Full service which includes all of the above the reciever drier ( filter which protects the co$170Sandgate, NSW•8w
- 12V A/C Under dash Evaporator Compressor Air Conditioner12V A/C Underdash Evaporator Compressor Air Conditioner Features: ● All high impact injected plastic case. ● High quality expansion valve. ● High qualitiy thermostat and rotative 3 speed blower switch. ●interface on the right side ● 32 pass 4 way coil for maximum airflow and cooling capacity. ● Mounting brackets and drain hose and T included ● This is a Premium Quality Universal under dash A/C evaporator, intended for use in adding an air conditioning system to a vehicle which did not have A/C$75NegotiableWilliamtown, NSW•13w
- PENRITE SEMI SYNTHETIC 15W-50 PETROL AND DIESEL ENGINE OIL 10 L DRUMNEW UNOPENED PENRITE HPR 15 15W-50 PETROL & DIESEL ENGINE OIL 10 LITRE PRODUCT PERFORMANCE LEVELS PETROL & LPG SPECIFICATIONS > API SL, SJ, SH, SG, SF, SE, SD Diesel SPECIFICATIONS > ACEA A3/B4 (PRIOR TO 2017), ACEA E7 (PRIOR TO 2017,) Allison C-4, API CF,-4 API CG-4, API CH-4, API CI-4, Caterpillar ECF-1-a, Cummins CES 20078, Deutz DQC-11-05, Ford M2C153-F, Ford M2C153-G, Ford M2C171-C, Global DHD-1, Global DLD-1, Global DLD-3, JASO DH-1, Mack EO-N Premium Plus 03, MAN 3275 MB 228.3., MT$85Mayfield East, NSW•2w
- NEW PENRITE HPR 20W - 60 DIESEL & PETROL ENGINE OIL 10 LITRE DRUMSNEW UNOPENED PENRITE HPR 20W - 60 PETROL & DIESEL ENGINE OIL 10 LITRE DRUMS $85 EACH. 3 AVAIL & SOME 1 L BOTTLES HPR Diesel is suitable for petrol & diesel engines in cars, 4WDs, 4X4, light & Heavy Duty commercial engines in trucks, tractors, agricultural & earthmoving equipment, industrial equipment, fork lifts & Stationary engines. Suitable for use with Diesel & Petrol/LPG (Dual Fuel). Also suitable for petrol and LPG engines as a mixed fleet oil. For use in motorcycles with wet clutches. Fea$85Mayfield East, NSW•2w
- 2, 4 STROKE & ROTARY PETRO TECH 2000 ENGINE TREATMENTSState of the art dry film boundary lubrication chemistry which bonds a micro thin super tough heat resistant friction reducing lubricant film to all contacting internal metal surfaces. PETRO TECH 2000 TREATMENTS ARE COMPATIBLE WITH ALL MINERAL & SYNTHETIC OILS EXCEEDS ALL MANUFACTURERS & MIL OIL SPECIFICATIONS WITHSTANDS TEMPS UP TO 2400 DEGREES C PREVENTS SEIZURES IN HYDRAULICS PROVEN TO REDUCE METAL WEAR BY 365%, INCREASE BEARING LIFE BY 250% PLUS & REDUCE OIL OXIDATION BY 1,000% PLUS PREVENT$35SHIPPING OFFEREDMayfield East, NSW•2w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 7006