46 views
MACE PULLEY REMOVAL TOOL HSV LSA SUPERCHARGED 6.2L V8
$180
MACE ENGINEERING GROUP
MACE SUPERCHARGER PULLEY REMOVAL TOOL TO SUIT HSV LSA SUPERCHARGED 6.2L V8
Vehicle Fitment: ClubSport R8 VF, GTS VF, GTSR VF, Maloo VF, Senator VF
Part Numbers: PLY813 ($180), PLY814 ($75 plus $160 bond)
Please confirm which part number you require by utilising our vehicle fitment guide and parts guide in the above images. Applicable prices are mentioned next to the part numbers.
Cranking up the boost on your LSA V8 has never been so easy. With our new and innovative supercharger pulley removal tool, this can be done right in the comfort of your own garage. The factory press-fit pulley has been pressed on with a significant amount of force which may seem impossible to remove, however with our proven design, removing the OEM pulley is almost like a walk in the park.
Designed and manufactured right here in-house, many painstaking hours were spent utilising CAD modelling and FEA testing of different arrangements before we settled on a design that was going to be effective, robust and simple to use. The main plates are laser cut from 16mm thick high strength mild steel to guarantee an even distribution of pressure acting on the pulley without deformation. This results in a clean and precise pulling motion that can be repeated infinitely without failure.
Perfect for general mechanics without a shop-press that perform these jobs on a regular basis or a group of mates looking to share a tool by splitting the bill.
Tool Loan:
This tool is also available to be loaned out for $75, but we will also require a $160 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days. Should you damage components, the core refund will be pro-rated to cover the cost of the damaged parts (not including consumables like anti-seize lubricant).
Contents:
- 1 X Supercharger pulley removal tool
Notes:
- Please contact us if you require a detailed fitting guide.
- Return postage of the tool is the responsibility of the customer.
- The supplied assembly lube must be used generously on all threads and friction points or premature wear may result.
- We assume no responsibility or liability for damage or injuries which may result from the use or installation of this product.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
G661
MACE SUPERCHARGER PULLEY REMOVAL TOOL TO SUIT HSV LSA SUPERCHARGED 6.2L V8
Vehicle Fitment: ClubSport R8 VF, GTS VF, GTSR VF, Maloo VF, Senator VF
Part Numbers: PLY813 ($180), PLY814 ($75 plus $160 bond)
Please confirm which part number you require by utilising our vehicle fitment guide and parts guide in the above images. Applicable prices are mentioned next to the part numbers.
Cranking up the boost on your LSA V8 has never been so easy. With our new and innovative supercharger pulley removal tool, this can be done right in the comfort of your own garage. The factory press-fit pulley has been pressed on with a significant amount of force which may seem impossible to remove, however with our proven design, removing the OEM pulley is almost like a walk in the park.
Designed and manufactured right here in-house, many painstaking hours were spent utilising CAD modelling and FEA testing of different arrangements before we settled on a design that was going to be effective, robust and simple to use. The main plates are laser cut from 16mm thick high strength mild steel to guarantee an even distribution of pressure acting on the pulley without deformation. This results in a clean and precise pulling motion that can be repeated infinitely without failure.
Perfect for general mechanics without a shop-press that perform these jobs on a regular basis or a group of mates looking to share a tool by splitting the bill.
Tool Loan:
This tool is also available to be loaned out for $75, but we will also require a $160 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days. Should you damage components, the core refund will be pro-rated to cover the cost of the damaged parts (not including consumables like anti-seize lubricant).
Contents:
- 1 X Supercharger pulley removal tool
Notes:
- Please contact us if you require a detailed fitting guide.
- Return postage of the tool is the responsibility of the customer.
- The supplied assembly lube must be used generously on all threads and friction points or premature wear may result.
- We assume no responsibility or liability for damage or injuries which may result from the use or installation of this product.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
G661
- Date Listed:09/05/2018
- Last Edited:28/12/2023
- Condition:New
- Warranty:Yes
- Make:Other
Similar Ads
- HSV MALOO R8My absolute pride and joy is unfortunately for sale. Only the absolute best products have been used on this car and the most reputable shops have serviced it. The car is currently sitting on 158,000km with a beautiful 6 speed auto. Only a few modifications have been done to the car as I wanted to keep it relatively original: VCM 5SC Cam VCM Cold Air Intake Shockworx Coilovers Full Custom Exhuast System with remotes Genuine HSV LSA 20” Rims I will not accept offers.$67,000Bulleen, VIC•128w
- Camaro ZL1 HSV K&N Cold air intake ZL1******2020 V8 supercharged GMSVCamaro 2019 / 2020 Cold cold 🥶 air intake suits 2019 / 2020 HSV ZL1 Camaro ZL1 LT4 V8 6.2 coupe auto & manual, not 2ss Brand New in the sealed factory K&N Box 📦 never been opened never been used Didn’t end up buying a Camaro so this cold air intake is up for sale Simple to install and it does not require a tune Can ship interstate-/send you suburb and postcode for courier 🚚 quote *if the ad is up-it’s still for Sale$950Albert Park, VIC•19w
- Harmonic Balancer Remover Puller For Ford Coyote 5.0 LS1 LS2 LS3 LS6 LHarmonic Balancer Remover Puller For Ford Coyote 5.0 LS1 LS2 LS3 LS6 LS7 Harmonic balancer removal kits are usually fiddly arrangements of arms, bolts and a socket/rachet on the end. Save yourself the drama and time by getting one of these. Slots into the Balancer, removing a whole level of complexity and 'third handness'. Slap a socket/rachet on the end and remove. Will also allow removal without having to remove the radiator (as less room is required) making it all that much easier.$175Boronia, VIC•99w
- Valve Spring Removal / Replacement Tool Kit, Bargain.Valve Spring Removal / Replacement Tool Kit. NEW! This kit allows you to remove and replace valve springs without the need to remove the cylinder head from the engine. Using compressed air valves are held closed and by levering the valve cap the collets are picked up by stromg magnets. The valve cap, spring and guide seal can then be replaced and reassembled. A Real bargain at this price. Pickup from Cranbourne Nth or will ship at buyers cost.$200Cranbourne North, VIC•89w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•5w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•5w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223