148 views
OIL CATCH CAN KIT FOR TOYOTA LANDCRUISER HZJ105R HDJ100R 1HZ 1HDFTE I6
$265
MACE ENGINEERING GROUP
SAAS OIL CATCH CAN KIT TO SUIT TOYOTA LANDCRUISER HZJ105R HDJ100R 1HZ 1HD-FTE TURBO DIESEL 4.2L I6
Vehicle Fitment: Landcruiser HZJ105R HDJ100R
For further details, please refer to the vehicle fitment guide in the above image.
Part Numbers: OCC617, OCC618
Please confirm which part number you require while checking out by utilising our vehicle fitment guide and parts guide in the above images.
Crank case ventilation system allows the vaporized engine oil to escape from the engine crank case, that needs to be passed through the air intake of the vehicle to meet the emission standards. This clogs and damages inter-cooler, turbocharger and intake manifold of the system.
SAAS catch cans are installed before the air intake system that separate and collect the oil droplets, prolonging the engine life and save you money on maintenance. It combines a fully baffled two stage separation system with a Bronze filter that does an exceptional job of capturing and reducing the amount of oil entering the intake system.
This catch can kit suits Toyota Landcruiser fitted with 1HZ and 1HD-FTE Turbo Diesel I6 engines.
Key Features:
- Aluminium billet construction.
- 360 degree swivel top mounted banjo for fully adjustable pipe exit.
- 40 Micron bronze filter.
- 500ml capacity.
- Excellent price to performance ratio.
- Fully baffled design.
- Easy to clean.
- SAAS 12 months limited warranty.
Contents:
- 1 X Oil catch tank
- 1 X Tank bracket
- 1 X Drain tap kit
- 1 X Fitting instruction
- 1 X 16mm hose
- 2 X M8 bolt/washer
- 2 X 16mm hose clamp
- 5 X Cable tie
Notes:
- This kit is designed to fit next to a radiator near battery.
- Do not attempt to install this kit if you do not have basic mechanical skills. Improper installation can cause severe engine damage and is not covered under warranty.
- It is advised to check the catch tank after driving 1000km to see the amount of oil in the tank. It is important that no oil build-up rises over the internal baffle to the bronze filter.
- Refer to the tank maintenance guide provided in the instructions manual for recommended cleaning interval and procedure.
- Handle this kit with caution as some of its metal parts may have sharp edges.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
About Us:
Here at Mace Engineering, we pride ourselves in delivering quality products and services at competitive prices for most of today’s makes and models. Originally focused on design and manufacture of performance upgrades for the Holden V6 and the Ford straight-6, the desire of satisfying a larger market also became a priority.
We now have an extensive assortment of standard replacement and performance aftermarket components which are supplied to both established workshops and a rapidly growing customer base. Their encouraging support and positive feedback reflect the exceptional quality of our products and services.
G3107
SAAS OIL CATCH CAN KIT TO SUIT TOYOTA LANDCRUISER HZJ105R HDJ100R 1HZ 1HD-FTE TURBO DIESEL 4.2L I6
Vehicle Fitment: Landcruiser HZJ105R HDJ100R
For further details, please refer to the vehicle fitment guide in the above image.
Part Numbers: OCC617, OCC618
Please confirm which part number you require while checking out by utilising our vehicle fitment guide and parts guide in the above images.
Crank case ventilation system allows the vaporized engine oil to escape from the engine crank case, that needs to be passed through the air intake of the vehicle to meet the emission standards. This clogs and damages inter-cooler, turbocharger and intake manifold of the system.
SAAS catch cans are installed before the air intake system that separate and collect the oil droplets, prolonging the engine life and save you money on maintenance. It combines a fully baffled two stage separation system with a Bronze filter that does an exceptional job of capturing and reducing the amount of oil entering the intake system.
This catch can kit suits Toyota Landcruiser fitted with 1HZ and 1HD-FTE Turbo Diesel I6 engines.
Key Features:
- Aluminium billet construction.
- 360 degree swivel top mounted banjo for fully adjustable pipe exit.
- 40 Micron bronze filter.
- 500ml capacity.
- Excellent price to performance ratio.
- Fully baffled design.
- Easy to clean.
- SAAS 12 months limited warranty.
Contents:
- 1 X Oil catch tank
- 1 X Tank bracket
- 1 X Drain tap kit
- 1 X Fitting instruction
- 1 X 16mm hose
- 2 X M8 bolt/washer
- 2 X 16mm hose clamp
- 5 X Cable tie
Notes:
- This kit is designed to fit next to a radiator near battery.
- Do not attempt to install this kit if you do not have basic mechanical skills. Improper installation can cause severe engine damage and is not covered under warranty.
- It is advised to check the catch tank after driving 1000km to see the amount of oil in the tank. It is important that no oil build-up rises over the internal baffle to the bronze filter.
- Refer to the tank maintenance guide provided in the instructions manual for recommended cleaning interval and procedure.
- Handle this kit with caution as some of its metal parts may have sharp edges.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
About Us:
Here at Mace Engineering, we pride ourselves in delivering quality products and services at competitive prices for most of today’s makes and models. Originally focused on design and manufacture of performance upgrades for the Holden V6 and the Ford straight-6, the desire of satisfying a larger market also became a priority.
We now have an extensive assortment of standard replacement and performance aftermarket components which are supplied to both established workshops and a rapidly growing customer base. Their encouraging support and positive feedback reflect the exceptional quality of our products and services.
G3107
- Date Listed:27/12/2023
- Last Edited:15/01/2024
- Condition:New
- Warranty:Yes
- Model:Other
- Make:Toyota
Similar Ads
- 1HZ Air Intake Inlet Manifold - Toyota Landcruiser HZJ105Came off a 1HZ from a 105 series. Please make sure this is the correct manifold for your engine. Pick up from Narre Warren South VIC or postage will be $30 across Aus$70Narre Warren South, VIC•34w
- Toyota Landcruiser HZJ105 Fuel Filter Primer 23380-17411Taken off a 105 series diesel 1HZ Toyota part number 23380-17410, 23380-17411 Pick up from Narre Warren South VIC or postage will be $20 across Aus$60Narre Warren South, VIC•65w
- Landcruiser HDJ100 100 series 1HD-FTE radiator fan shroudIn good condition. Came off a 2001 HDJ100. Pick up from Narre Warren South VIC$100Narre Warren South, VIC•65w
- Landcruiser HDJ100 100 series radiator overflow reservoir bottleGenuine Denso item. Removed from a HDJ100 with a 1HD-FTE Pick up from Narre Warren South VIC$50Narre Warren South, VIC•65w
- Landcruiser 100 series HDJ100 stock intercooler with pipingRemoved from a 2001 HDJ100 with a 1HD-FTE Pick up from Narre Warren South VIC$100Narre Warren South, VIC•65w
- Toyota Landcruiser 1HZ 275mm FlywheelIn good condition. Removed from a HZJ105 Pick up from Narre Warren South VIC$100Narre Warren South, VIC•71w
- Landcruiser 100 105 series Full Time HF2A Transfer CaseFull time 4WD transfer case (HF2A). Came off a FZJ105 with a H151 manual gearbox. This should fit any full time 4WD Landcruiser 100/105 series with a H151 gearbox. This includes the FZJ105, HDJ100 and UZJ100 models. (I also have a HF2A transfer case from an auto for sale) Toyota compatible part numbers: 36130-6A170, 36130-6A171, 36130-60820, 36130-60821 Pick up from Narre Warren South VIC or please message me for a freight quote$500Narre Warren South, VIC•20w
- Landcruiser 100 series HDJ100 front tailshaftCame off a 100 series GXL turbo diesel 1HD-FTE with a manual transmission and full time transfer case 69cm in length. Uni-joints are in good condition Pick up from Narre Warren South$150Narre Warren South, VIC•68w
- TOYOTA HZJ75 1HZ LANDCRUISER CLUTCH RELEASE BEARINGTOYOTA LANDCRUISER HZJ70 HZJ73 HZJ75 HZJ77 1HZ DIESEL CLUTCH THRUST BEARING NEW NEVER USED....... CAN POST AUSTRALIA WIDE........ APPROX $10.50 FOR POSTAGE..$50Werribee, VIC•300w
- Toyota Landcruiser fuel return changeover solenoid 77720-60070Genuine part in good working condition. Part number 77720-60070. Return solenoid only- Won’t include the fuel lines attached. Removed from a HZJ105 but will fit other 100 and 105 series (please ensure this is the correct part number for your car). Pick up from Narre Warren South VIC or postage will be $20 across Aus$50Narre Warren South, VIC•65w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•6w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•6w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•6w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223