100 views
SET OF 2 MACE UNBREAKABLE ENGINE MOUNTS HSV LS1 LS2 5.7L 6.0L V8
$250
MACE ENGINEERING GROUP
SET OF 2 MACE UNBREAKABLE ENGINE MOUNTS TO SUIT HSV LS1 LS2 5.7L 6.0L V8
Vehicle Fitment: Avalanche VY VZ, ClubSport VT VX VY VZ, Coupe V2 VZ, Grange WH WK WL, GTS VT VX VY, Maloo VU VY VZ, Senator VT VX VY VZ, SV300 VX, SV6000 VZ, SV99 VT
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: MNT815
This stock height engine mount is made from 5mm laser cut steel plate and is precision folded for increased strength and accurate fitment. It is all jigged up when welded and finished in gloss black enamel paint. The centre cylindrical rubber bush is 50mm in diameter and joins the two halves of the mount with a 13mm thru bolt. The heavy duty bush is always under compression regardless of the direction of the applied load. It absorbs engine vibration very well but increases resistance the more the motor moves, reducing the movement to about 5mm.
Great for use as a standard replacement engine mount or a circuit, speedway, drift and drag racing application. Also ideal for turbo cars and cars with large diameter headers with tight engine bay clearances.
Can be used individually on the passenger side in conjunction with a factory mount on the driver’s side to reduce the engine lifting under acceleration and maintain a smooth factory feel, or in pairs to stiffen up the front end and significantly reduce engine movement during acceleration and high speed cornering, acceleration and deceleration.
Contents:
- 2 X Engine mount
Notes:
- Installing a pair of mounts is ideal, recommended for racing purposes, so that the motor sits evenly on the k-frame. However, we have received feedback from customers that fitting only one hasn't caused any problems. Given the stiffness of the mount, running 2 on either side may induce additional vibrations.
- This mount is not suitable for vehicles with engines that run Active Fuel Management (AFM).
- A pair of engine mounts can be purchased through another listing.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Product Warranty:
Mace Engineering Group products are covered by a 1 year warranty, unless otherwise specified in the ad or written agreement from Mace Engineering Group.
Terms of Warranty:
Customer must return the defective item(s) first, with a full description of the problem. Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical item(s) will be sent out to the customer.
Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk.
The warranty does not cover any defect caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care or attempted repair by the customer or unauthorized person.
Warranty only covers the purchased product involved in the warranty claim.
Customer must have at least 1 proof of purchase whether it is an invoice, confirmation of payment email or payment related receipt (paypal, bank statement, credit card statement, etc.)
G827
SET OF 2 MACE UNBREAKABLE ENGINE MOUNTS TO SUIT HSV LS1 LS2 5.7L 6.0L V8
Vehicle Fitment: Avalanche VY VZ, ClubSport VT VX VY VZ, Coupe V2 VZ, Grange WH WK WL, GTS VT VX VY, Maloo VU VY VZ, Senator VT VX VY VZ, SV300 VX, SV6000 VZ, SV99 VT
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: MNT815
This stock height engine mount is made from 5mm laser cut steel plate and is precision folded for increased strength and accurate fitment. It is all jigged up when welded and finished in gloss black enamel paint. The centre cylindrical rubber bush is 50mm in diameter and joins the two halves of the mount with a 13mm thru bolt. The heavy duty bush is always under compression regardless of the direction of the applied load. It absorbs engine vibration very well but increases resistance the more the motor moves, reducing the movement to about 5mm.
Great for use as a standard replacement engine mount or a circuit, speedway, drift and drag racing application. Also ideal for turbo cars and cars with large diameter headers with tight engine bay clearances.
Can be used individually on the passenger side in conjunction with a factory mount on the driver’s side to reduce the engine lifting under acceleration and maintain a smooth factory feel, or in pairs to stiffen up the front end and significantly reduce engine movement during acceleration and high speed cornering, acceleration and deceleration.
Contents:
- 2 X Engine mount
Notes:
- Installing a pair of mounts is ideal, recommended for racing purposes, so that the motor sits evenly on the k-frame. However, we have received feedback from customers that fitting only one hasn't caused any problems. Given the stiffness of the mount, running 2 on either side may induce additional vibrations.
- This mount is not suitable for vehicles with engines that run Active Fuel Management (AFM).
- A pair of engine mounts can be purchased through another listing.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Product Warranty:
Mace Engineering Group products are covered by a 1 year warranty, unless otherwise specified in the ad or written agreement from Mace Engineering Group.
Terms of Warranty:
Customer must return the defective item(s) first, with a full description of the problem. Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical item(s) will be sent out to the customer.
Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk.
The warranty does not cover any defect caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care or attempted repair by the customer or unauthorized person.
Warranty only covers the purchased product involved in the warranty claim.
Customer must have at least 1 proof of purchase whether it is an invoice, confirmation of payment email or payment related receipt (paypal, bank statement, credit card statement, etc.)
G827
- Date Listed:24/07/2018
- Last Edited:12/10/2020
- Condition:New
- Warranty:Yes
- Make:Other
Similar Ads
- VF LS3 6.2L V8 Engine and TR6060 trans only 71k L98 L77 LS2 VE HSVComplete LS3 conversion with a TR6060 6 speed manual transmission from a VF series 2 SSV Redline with only 71k on the clock. video of engine running is here: https://youtu.be/ju_gocJRqmA?si=J3c5wjnarGkjt_e- Comes with all accessory’s, engine wiring loom, ECU, pedal box assembly and tail shaft (Please note, cats are not included in the sale) If you require other parts for your conversion please contact me as we can negotiate that as well. It will be palletised, strapped and shrink wrapped i$16,000Keilor, VIC•5w
- Holden LS1 ls2 ls3 coilpack and holdersHave a few sets can sell individually Price for one 40 bucks can do package deals Will separate holders too please text or call To suit holden hsv ve vf vt vx vz vy commodore or drift car if they have this set up$40Keilor Downs, VIC•264w
- Holden ls2 ls3 coilpack coilpackCoilpacks in good condition came off hsv maloo After 400 for set$400Keilor Downs, VIC•254w
- Genuine LS Holden Engine Cover unmarked!Genuine HOLDEN V8 engine Cover - immaculate! Fits LS series engines. VE VF All clips and all-important fuel cap surround. Dress it up or give it that enhanced, OEM look. Can post Nationally or pick up Mount Waverley, VICTORIA Advertised elsewhere, but if you can see this Ad. it is still for sale.$299Mount Waverley, VIC•1d
- HK-HT-HG-HQ-HJ-HX-HZ-WB-Torana LC-LJ-LH-LX-UC 6 Cyclinder Engine MountHolden hk-ht-hg-hq-hj-hx-hz-wb Torana lc-lj-lh-uc Commodore vb-vc-vh-vk ONE Brand New 6 cyclinder Engine Mount $15 pick up from St Albans in Melbourne Western Suburbs or can post Australia Wide for $10 Ph: ........HAVE A LOOK AT MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS AND CAN DO COMBINED POSTAGE........................................... gtr-xu1-gmh-monaro-ls-premier-belmont-premier-deluxe-vacationer-ss-slr-sunbird-sle-berlina-executive-sl-13$15St Albans, VIC•177w
- Holden HQ-HJ-HX-HZ-WB Torana LH-LX 253-308 V8 Engine Mount & BracketHolden hq-hj-hx-hz-wb Torana lh-lx 253-304-308 v8 " ONE " engine mount & bracket $40......Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $13...........Ph:............HAVE A LOOK THROUGH MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS & CAN DO COMBINED POSTAGE..........................................................................................................................................................................................$40St Albans, VIC•13w
- C4 Corvette LS Swap conversion kitSelling my LS1 swap conversion kit for C4 Corvette Includes LS swap Sump, gasket and baffel pan also comes with dirty dingo engine mounts adaptors and 4L60E transmission \ tail shaft adaptor All Parts are new and imported from the States$1,250Lyndhurst, VIC•57w
- Mazda MX-5 1.8 bpz3 VVT mx5 motor engine miata mx 5 na nbMotor is for sale in parts only. Everything for sale. Prices starting at $25 upwards Parting out in bits Mazda miata mx5 nb vvt 1.8 and na 1.6 na6 motor all bits for sale listed below. Head exhaust parts coils extractors cylinder head engine mounts various sensors throttle body iac tps cams cam cover valve cover rocker cover oil pump crank pistons rods bolts block oil pan sump water pump cam gears vvt solinoid alternator starter motor etc of a good running motor cylinder head cams goo$25Newport, VIC•5w
- MAZDA MX5 NA na6 b6 motor engine head block parts wrecking miata mx-5Motor is for sale in parts only. Everything for sale. Prices starting at $25 upwards Parting out in bits Mazda miata mx5 nb vvt 1.8 and na 1.6 na6 motor all bits for sale listed below. Head exhaust parts coils extractors cylinder head engine mounts various sensors throttle body iac tps cams cam cover valve cover rocker cover oil pump crank pistons rods bolts block oil pan sump water pump cam gears vvt solinoid alternator starter motor etc of a good running motor cylinder head cams goo$25Newport, VIC•1w
- Holden / Hsv Ls partsHolden / Hsv Parts All parts fairly new with a few months New fuel rails with parts - $110 Ls catch can with hoses / bolts - $90 K&N otr filter good condition - $60 Stock Ls throttle body - $60 3.5t tow bar with bolts - $70 Vt-vx window switches x3 - $50 A few rubber hoses and spare caps Was used in my Vx ss Ls1 before the motor was rebuild 👍 Pick up Lynbrook / Victoria$90Lynbrook, VIC•14w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•5w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•5w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223